Altec Lansing Shockwave 200 Wireless Party Speaker

Introduction

Thank you for choosing the Altec Lansing Shockwave 200 Wireless Party Speaker. This powerful and versatile speaker is designed to deliver high-quality audio with dynamic LED lighting, making it ideal for any gathering. This manual provides essential information for setting up, operating, and maintaining your speaker to ensure optimal performance and longevity.

What's in the Box

Please ensure all items are present before proceeding:

• Altec Lansing Shockwave 200 Speaker
• AC Adapter
• User Manual (this document)

Product Overview

The Altec Lansing Shockwave 200 features a robust design with intuitive controls and vibrant LED lighting. Below are key components and their functions.

Front Panel

Figure 1: Front view of the Shockwave 200 speaker, showcasing the speaker grilles and the vibrant LED light strips along the sides.

Top Control Panel

Figure 2: Close-up of the top control panel, showing the power button, volume dial, playback controls, FM/BT/AUX mode buttons, and bass control.

• Power Button: Turns the speaker on/off.
• Volume Dial: Adjusts the master volume.
• Playback Controls: Play/Pause, Skip Forward, Skip Backward.
• Mode Buttons: Switch between FM Radio, Bluetooth (BT), and Auxiliary (AUX) input.
• Bass Button: Cycles through multiple bass boost modes.
• Light Mode Button: Changes LED light patterns.

Rear Panel Connections

Figure 3: Rear view displaying the various input and output ports, including DC In, Line In, USB Output, and Microphone input with level control.

• DC IN: Power input for charging and continuous operation.
• LINE IN: 3.5mm auxiliary input for wired audio devices.
• OUTPUT 5V=1A: USB port for charging external devices.
• MIC: 6.35mm microphone input.
• MIC LEVEL: Adjusts microphone volume.
• RESET: Button to reset the speaker to factory settings.

Setup

Charging the Speaker

Before first use, fully charge the speaker for approximately 4-5 hours. A full charge provides up to 12 hours of Bluetooth playtime.

1. Connect the supplied AC adapter to the DC IN port on the rear of the speaker.
2. Plug the AC adapter into a standard wall outlet.
3. The charging indicator light will illuminate. It will change or turn off once charging is complete.

Powering On/Off

Press and hold the Power Button on the top control panel for 2-3 seconds to turn the speaker on or off.

Operating Instructions

Bluetooth Pairing

The Shockwave 200 automatically enters Bluetooth pairing mode when powered on for the first time or if no device is connected.

1. Ensure the speaker is powered on and in Bluetooth mode (indicated by 'bt' on the display).
2. On your mobile device, enable Bluetooth and search for available devices.
3. Select "Shockwave 200" from the list.
4. Once paired, the speaker will confirm with an audible tone.

Party Sync Mode (True Wireless Pairing)

Connect up to 50 Altec Lansing Party Sync enabled speakers for a synchronized audio experience.

1. Ensure both (or all) speakers are powered on and in Bluetooth mode.
2. Connect your device to one speaker (the "master" speaker) via Bluetooth.
3. On the master speaker, double-press the Bluetooth / Chain Link icon button (often labeled BT/CSD or similar). The display will show "PtOn" (Party On).
4. On the additional speakers, double-press the same Bluetooth / Chain Link icon button. They will connect to the master speaker.
5. To disconnect Party Sync, double-press the button again. The display will show "PtOf" (Party Off).

Figure 4: Illustration of the Party Sync feature, showing multiple speakers connected wirelessly for a larger soundstage.

LED Light Modes

The speaker features over 9 LED light modes that beat, strobe, and pulse to the music.

• Press the Light Mode Button (often indicated by a sun icon) on the top panel to cycle through the available light modes.
• Press and hold the button to turn the lights off. Press again to turn them back on to the last selected mode.

Figure 5: The speaker displaying its multi-color LED lights, enhancing the party atmosphere.

AM/FM Radio

To use the built-in AM/FM radio:

1. Press the FM Button to switch to FM radio mode.
2. Press and hold the Play/Pause button to auto-scan and save available stations.
3. Use the Skip Forward/Backward buttons to navigate through saved stations.

Auxiliary Input (LINE IN)

Connect non-Bluetooth devices using a 3.5mm audio cable (not included).

1. Connect one end of the 3.5mm audio cable to the LINE IN port on the speaker's rear panel.
2. Connect the other end to the audio output of your device.
3. Press the AUX Button on the top panel to switch to auxiliary mode.

Microphone Input

For karaoke or public address:

1. Plug a 6.35mm microphone into the MIC input on the rear panel.
2. Adjust the microphone volume using the MIC LEVEL knob.

Charging External Devices (USB Output)

Use the speaker's battery to charge your mobile devices.

• Connect your device's USB charging cable to the OUTPUT 5V=1A port on the rear panel.
• Charging will begin automatically.

Maintenance

Cleaning

Wipe the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents. Avoid exposing the speaker to excessive dust or moisture.

Battery Care

To prolong battery life, avoid fully discharging the speaker frequently. Recharge the battery regularly, even if not in use for extended periods.

Troubleshooting

Specifications

• Model Name: Shockwave 200
• Model Number: IMT7100
• Speaker Type: Multi Room / Portable Bluetooth Speaker
• Peak Power: 180 Watts
• Battery Life: Up to 12 Hours (Bluetooth playtime)
• Connectivity: Bluetooth, FM Radio, AUX (3.5mm)
• Special Features: Bass Boost, Multi-Color LED Modes, Party Sync (up to 50 speakers), USB Charging Output (5V=1A), Microphone Input, Built-in Carry Handle.
• Product Dimensions: 10.51"D x 19.84"W x 9.37"H
• Item Weight: 12 Pounds
• Water Resistance Level: Water Resistant
• Included Components: AC Adapter

Warranty & Support

The Altec Lansing Shockwave 200 comes with a Limited Warranty. For detailed warranty information and support, please refer to the official Altec Lansing website or contact customer service.

Manufacturer: Sakar International

Customer Support: For technical assistance or warranty claims, please visit alteclansing.com/support or refer to the contact information provided with your product packaging.

Official Product Video

Watch this video for a detailed overview of the Altec Lansing Shockwave 200 speaker's features and controls.

No official seller videos are available for embedding at this time.