1. Introduction
Thank you for choosing the Focal 100 OD-8T Indoor/Outdoor Speaker. This manual provides essential information for the proper installation, operation, and maintenance of your speaker. Designed for versatility, the 100 OD-8T delivers high-quality audio in both indoor and outdoor environments, featuring an IP66-certified enclosure and compatibility with 70V/100V and 8-ohm systems. Please read this manual thoroughly before proceeding with installation and use.
2. Safety Instructions
- Read all instructions: Before operating the speaker, carefully read and understand all safety and operating instructions.
- Retain instructions: Keep this manual for future reference.
- Heed warnings: Observe all warnings on the product and in the operating instructions.
- Follow instructions: Adhere to all installation and usage instructions.
- Water and moisture: While the speaker is IP66-certified for outdoor use, avoid submerging it in water or exposing it to extreme moisture beyond its rating. Ensure all connections are properly sealed.
- Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Ventilation: Ensure adequate ventilation around the speaker, especially if installed in an enclosed space.
- Mounting: Use only the specified mounting bracket and hardware. Ensure the mounting surface can safely support the speaker's weight. Improper mounting can lead to injury or damage.
- Servicing: Do not attempt to service this product yourself. Refer all servicing to qualified service personnel.
- Wiring: Ensure correct wiring polarity and impedance/voltage settings to prevent damage to the speaker or amplifier.
3. Package Contents
Verify that all items are present in the package:
- Focal 100 OD-8T Speaker (1 unit)
- Installation Bracket (1 unit)
- User Manual (this document)
4. Product Overview
The Focal 100 OD-8T is a high-performance indoor/outdoor speaker designed for robust sound reproduction. It features an 8-inch woofer with Polyglass treatment for deep bass and clear mid-range, complemented by an aluminum inverted-dome tweeter for precise high frequencies. The speaker's enclosure is IP66-certified, making it resistant to dust and powerful water jets, suitable for various weather conditions.
Figure 4.1: Front view of the Focal 100 OD-8T speaker, showcasing its white grille and sleek design.
Figure 4.2: Rear view of the speaker, highlighting the input terminals and the 70V/100V/8-ohm power selector switch. The robust mounting bracket attachment point is also visible.
Figure 4.3: Angled view of the Focal 100 OD-8T speaker, demonstrating its compact and durable design suitable for various installations.
5. Setup and Installation
5.1 Mounting the Speaker
The Focal 100 OD-8T comes with an aluminum bracket designed for secure mounting. This bracket features a reinforced profile and notched fastening with 180-degree articulation, allowing for flexible positioning.
- Choose Location: Select a suitable mounting location that can safely support the speaker's weight (approximately 19.45 lbs or 8.82 kg). Consider sound dispersion and environmental factors for outdoor installations.
- Attach Bracket: Securely attach the aluminum mounting bracket to the chosen surface using appropriate hardware (not included). Ensure the bracket is level and firmly fixed.
- Attach Speaker: Mount the speaker onto the bracket. The notched fastening allows for precise angle adjustment. Tighten all fasteners to secure the speaker in place.
- Adjust Angle: Utilize the 180-degree articulation to direct the sound towards the desired listening area.
5.2 Wiring and Power Selection
The 100 OD-8T features a push-spring terminal with silicone protection and an 8-ohm/100-volt/70-volt power selector. It is crucial to set the correct power mode before connecting to an amplifier.
- Select Power Mode: Locate the power selector switch on the rear of the speaker (refer to Figure 4.2). Use a flat-head screwdriver to carefully rotate the switch to the desired setting:
- 8-ohm: For standard low-impedance amplifier connections.
- 70V/100V: For constant voltage (transformer-based) commercial audio systems. Select the appropriate wattage tap (e.g., 20W, 40W, 80W, 120W) based on your system's design and desired output.
Caution: Ensure the power selector is set correctly before connecting to an amplifier. Incorrect settings can damage the speaker or amplifier.
- Connect Wiring: Connect your amplifier's speaker output wires to the push-spring terminals on the speaker. Ensure correct polarity (+ to + and - to -). The silicone protection helps maintain weather resistance.
- Secure Connections: Double-check that all wire connections are secure and free from short circuits.
6. Operating Instructions
Once the speaker is securely mounted and correctly wired, operating it is straightforward:
- Power On Amplifier: Turn on your audio amplifier or receiver.
- Adjust Volume: Gradually increase the volume from your amplifier to a comfortable listening level.
- Sound Check: Verify that sound is being produced clearly from the speaker. If not, refer to the Troubleshooting section.
- Optimal Placement: Experiment with the speaker's angle using the bracket's articulation to achieve the best sound coverage for your listening area.
7. Maintenance
Regular maintenance will help ensure the longevity and optimal performance of your Focal 100 OD-8T speaker.
- Cleaning:
- For general cleaning, use a soft, damp cloth to wipe down the enclosure.
- Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish or materials.
- For outdoor installations, periodically rinse off dirt and debris with a gentle stream of water, ensuring the silicone protection on terminals remains intact.
- Inspection:
- Periodically inspect the mounting bracket and fasteners for any signs of loosening or corrosion, especially in outdoor environments. Tighten as necessary.
- Check speaker cables for damage or fraying. Replace damaged cables immediately.
- Environmental Protection: While IP66-rated, extreme weather conditions (e.g., prolonged direct sunlight, heavy snow accumulation) can still affect performance over time. Consider protective covers if the speaker is exposed to severe elements for extended periods.
8. Troubleshooting
If you encounter issues with your Focal 100 OD-8T speaker, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound from speaker |
|
|
| Distorted or unclear sound |
|
|
| Intermittent sound |
|
|
9. Specifications
| Feature | Detail |
|---|---|
| Model | Focal 100 OD-8T |
| Speaker Type | Indoor/Outdoor Passive Loudspeaker |
| Woofer Diameter | 8 Inches (Polyglass treatment) |
| Tweeter Type | Aluminum Inverted-Dome |
| Frequency Response | 60Hz - 23kHz |
| Power Handling | 20W - 150W |
| Impedance/Voltage Options | 8-ohm, 70V, 100V (with selectable wattage taps) |
| Waterproof Rating | IP66 Certified |
| Enclosure Material | UV-treated, high-density polypropylene damping cabinet |
| Mounting Type | Outside Mount (with 180-degree articulating aluminum bracket) |
| Product Dimensions (L x W x H) | 15.75 x 9.84 x 11.81 inches (40 x 25 x 30 cm) |
| Item Weight | 19.45 pounds (8.82 kg) |
| Manufacturer | Focal |
10. Warranty and Support
Focal products are designed and manufactured to the highest quality standards. For information regarding warranty coverage, terms, and conditions, please refer to the warranty card included with your product or visit the official Focal website. For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Focal dealer or Focal customer support directly.
Focal Website: www.focal.com
