Frizzlife PX500-A Reverse Osmosis Water Filtration System User Manual

Product Overview

The Frizzlife PX500-A is an advanced under-sink tankless reverse osmosis water filtration system designed to provide clean, alkaline, and remineralized water. It features a 500 GPD (Gallons Per Day) fast flow RO filter, ensuring a continuous supply of purified water without the need for a bulky storage tank. This system also includes a MWT3 Mini Water Tank and an IMC-1 Ice Maker Kit for enhanced convenience.

What's in the Box:

• RO System Unit
• Filter Cartridges (Pre-filter, RO Membrane, Post-alkaline filter)
• Faucet
• MWT3 Mini Water Tank
• IMC-1 Ice Maker Kit
• Installation Accessories (tubing, fittings, etc.)

Key Features

• Superior Filtration Performance: The RO membrane (ASR312-500G) with 0.0001 micron precision removes over 1000+ contaminants (99.99%) including fluoride, chlorine, chloramine, TDS, limescale, lead, and other heavy metals.
• Tankless Design: High capacity of 500 GPD eliminates the need for a traditional water tank, saving space and preventing secondary pollution. Direct water flow reaches up to 0.4 GPM at 60psi.
• Easy DIY Installation: Comes with pre-loaded filters and minimal connection points, allowing for quick and easy self-installation.
• Filter Life Reminder & Quick Change: An embedded filter life monitor indicates filter status (blue for good, red for low life) and beeps when replacement is needed. Filters can be changed in seconds with a single twist.
• Remineralization & Low Drain Ratio: The third stage filter (ASR313-A) remineralizes pure water, adding essential minerals and raising pH to over 7.5. The system boasts a low waste water ratio of 1 cup waste water for every 1.5 cups of pure water.

Setup and Installation

This section provides step-by-step instructions for setting up your Frizzlife PX500-A Reverse Osmosis Water Filtration System. The system is designed for easy DIY installation, and all necessary components are included in the package.

For a detailed visual guide, please refer to the official installation video available on the Frizzlife website or YouTube channel, as indicated in the installation diagram. The IMC-1 Ice Maker Kit allows connection to your refrigerator for purified ice.

Operating Instructions

The Frizzlife PX500-A operates with a tankless design, providing direct water flow as needed. The system is largely automated, with indicators to help you monitor its status.

Filter Life Monitor: The operation panel includes a filter life monitor with LED indicators. A blue light indicates good filter life, while a red light signifies low life. An audible beep will sound when a filter change is required for optimal performance.

Maintenance and Filter Replacement

Regular maintenance ensures optimal performance and longevity of your Frizzlife PX500-A filtration system. Filter replacement is designed to be quick and easy.

Quick Filter Change: Filter replacement takes approximately 2 seconds per filter, requiring only a single twist to remove and insert new cartridges.

Recommended Replacement Schedule:

• PPC Filter (1st Stage): Replace every 6 months.
• TC-A Filter (3rd Stage): Replace every 1 year.
• RO Membrane (2nd Stage): Replace every 2 years.

Troubleshooting

This section provides solutions to common issues you might encounter with your Frizzlife PX500-A system. If the problem persists, please contact customer support.

Common Issues and Solutions:

• Low Water Flow:
  Possible Causes: Low incoming water pressure, clogged filters, kinked tubing.
  Solutions: Check your household water pressure. Ensure all filters are installed correctly and replace them if they are past their service life. Inspect tubing for any bends or blockages.
• Red Light Indicator / Beeping:
  Possible Causes: Filter(s) have reached end of life.
  Solutions: Identify which filter indicator is red (PPC, RO, or TC-A) and replace the corresponding filter cartridge according to the maintenance schedule.
• Unusual Taste or Odor in Water:
  Possible Causes: Filters need replacement, system not flushed properly after installation/filter change, contaminated source water.
  Solutions: Replace filters if due. Ensure the system is flushed thoroughly as per installation instructions. If source water quality is suspected, consult a professional.
• Leakage:
  Possible Causes: Loose connections, improperly seated O-rings, damaged tubing.
  Solutions: Turn off water supply to the unit immediately. Check all quick-connect fittings to ensure they are fully inserted and secured. Inspect O-rings on filter cartridges for proper seating. If tubing is damaged, replace it.

Specifications

Warranty and Support

For detailed warranty information, product registration, and customer support, please visit the official Frizzlife website. You can also find FAQs and additional resources there.

Official Website: www.frizzlife.com

For technical assistance or specific inquiries, please contact Frizzlife customer service directly through their website.