Anmytek H0073 Black 3-Drawer Dresser Instruction Manual

1. Safety Information

Please read and understand all instructions before assembly and use. Keep this manual for future reference.

• Anti-Tip Hazard: Furniture can tip over, causing serious or fatal injuries. Always install the anti-tip restraint provided with the dresser.
• Weight Limits: Do not exceed the maximum weight capacity for the dresser top (100 lbs) and each drawer (50 lbs). Overloading can cause instability and damage.
• Child Safety: Keep small parts and packaging materials away from children. Do not allow children to climb on or play with the dresser.
• Assembly: Assemble the dresser on a soft, clean surface to prevent scratches. Ensure all connections are secure before use.

2. Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Anmytek customer support.

Components:

• Top Panel
• Side Panels (Left & Right)
• Back Panel
• Bottom Panel
• Drawer Fronts (3)
• Drawer Side Panels (6)
• Drawer Back Panels (3)
• Drawer Bottom Panels (3)
• Metal Legs (4)

Hardware:

• Screws, Dowels, Cam Locks, Cam Bolts
• Drawer Slides (6 pairs)
• Drawer Handles (3)
• Anti-Tip Kit (Wall Anchor, Strap, Screws)
• Allen Wrench (if applicable)

3. Assembly Instructions

Estimated Assembly Time: 1-2 hours (2 people recommended)

Tools Required: Phillips head screwdriver (not included)

Preparation:

• Clear a spacious area for assembly.
• Lay out all parts and hardware on a soft, clean surface to prevent scratches.
• Identify each component using the provided labels or diagrams.

Step-by-Step Guide:

1. Attach Metal Legs:

   Secure the four metal legs to the bottom panel of the dresser using the provided screws. Ensure they are firmly tightened for stability.

   

   Image: Front view of the assembled dresser, highlighting the gold metal legs.

2. Assemble Main Frame:

   Connect the side panels to the bottom panel and then attach the top panel. Use cam locks, cam bolts, and dowels as indicated in the detailed diagram (not provided here, refer to included paper manual). Ensure all connections are flush and secure.

   

   Image: Two dressers shown together, emphasizing structural integrity and material quality.

3. Install Drawer Slides:

   Attach the drawer slides to the inner sides of the dresser frame and to the drawer side panels. Pay attention to the orientation of the slides (left/right, front/back) to ensure smooth operation.

   

   Image: Detailed view showing the smooth drawer slides and solid metal legs.

4. Assemble Drawers:

   Connect the drawer side panels, back panel, and front panel. Slide the drawer bottom panel into the grooves. Attach the drawer handles to the front panels.

   

   Image: Dresser with drawers open, illustrating the internal storage space.

5. Insert Drawers:

   Carefully align the assembled drawers with the installed drawer slides on the dresser frame and push them in until they click into place. Test each drawer for smooth movement.

   

   Image: Dresser with one drawer pulled out, illustrating the drawer mechanism and overall dimensions.

6. Install Anti-Tip Kit:

   Attach the anti-tip bracket to the back of the dresser and to a wall stud using the provided hardware. This step is crucial for safety and must not be skipped.

   

   Image: Visual guide for installing the anti-tip wall anchor and securing the back panel with clips.

4. Operating Instructions

Using the Drawers:

• To open a drawer, gently pull the handle. To close, push the drawer firmly until it is fully seated.
• Avoid slamming drawers, as this can damage the slides and contents.
• Distribute weight evenly within the drawers to prevent strain on the slides and maintain balance.

Weight Capacity:

• Dresser Top: Maximum 100 lbs (45 kg). Suitable for lamps, decorative items, or small electronics.
• Each Drawer: Maximum 50 lbs (22.7 kg). Ideal for clothing, linens, or other personal items.

5. Maintenance

• Cleaning: Wipe the dresser surfaces with a dry, soft cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Spills: Immediately wipe up any spills with a dry cloth to prevent moisture damage.
• Hardware Check: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
• Drawer Slides: If drawers become stiff, a small amount of silicone lubricant can be applied to the slides.

6. Troubleshooting

• Dresser is Wobbly:

  Ensure all assembly screws are fully tightened. Check that the dresser is on a level surface. Adjust leg levelers if present.

• Drawers Do Not Slide Smoothly:

  Verify that the drawer slides are correctly installed and aligned on both the drawer and the dresser frame. Ensure no objects are obstructing the slides. Apply silicone lubricant if needed.

• Drawer Fronts Are Uneven:

  Check that the drawer slides are installed at the same height on both sides of the dresser frame. Ensure the drawer front is securely attached to the drawer box.

7. Specifications

8. Warranty & Support

Anmytek stands behind the quality of its products. For any questions, missing parts, or concerns regarding your Anmytek H0073 Black 3-Drawer Dresser, please contact our customer support team. Details for contacting support are typically found on the product packaging or the retailer's website where the product was purchased.

Please retain your proof of purchase for any warranty claims.