AVENLI AVENLISPACOVER

Download PDF
Contents

AVENLI CleanPlus Inflatable Spa & Hot Tub Cover User Manual

Model: AVENLISPACOVER

Introduction

Thank you for choosing the AVENLI CleanPlus Inflatable Spa & Hot Tub Cover. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new cover. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.

The AVENLI CleanPlus cover is designed to provide superior thermal insulation, reduce heat loss, and protect your spa or hot tub from environmental debris.

Product Features

  • Efficient Thermal Insulation: Designed to retain water temperature, significantly reducing heat loss and optimizing energy efficiency for your inflatable spa or hot tub.
  • Optimal Protection: Shields your whirlpool from dust, leaves, insects, and other debris, ensuring cleaner and more hygienic water for immediate use.
  • Durable Material: Constructed from high-quality, weather-resistant vinyl, ensuring longevity and reliable performance in various conditions.
  • Easy Handling: Lightweight and simple to manipulate, making it convenient for daily use and year-round application, indoors or outdoors.
  • Wide Compatibility: With a diameter of 125 cm, this inflatable cover is suitable for a wide range of spa and whirlpool models, enhancing thermal efficiency and reducing energy costs.
  • Compact Storage: Features quick inflation and deflation, allowing for easy folding and compact storage, which simplifies transport and off-season storage.

Setup Instructions

  1. Unpack the Cover: Carefully remove the inflatable spa cover from its packaging. Unfold it on a clean, flat surface near your spa or hot tub.
  2. Locate the Inflation Valve: Identify the inflation valve on the cover. It is typically a Boston valve or similar type, designed for quick inflation and deflation.
  3. Inflate the Cover: Use a compatible air pump (not included, but often supplied with inflatable spas) to inflate the cover. Insert the pump nozzle into the valve and inflate until the cover is firm to the touch but not overinflated. Overinflation can damage the material. The cover should be rigid enough to support light weight and provide insulation.
  4. Man inflating the spa cover with an air pump.

    Image: A person is shown inflating the AVENLI CleanPlus spa cover using an external air pump. The cover is laid flat on the ground, and the pump's hose is connected to the inflation valve.

    Close-up of the inflation process.

    Image: A closer view of the inflation process, showing the air pump nozzle securely inserted into the cover's valve, ensuring proper inflation.

  5. Secure the Valve: Once inflated, securely close the inflation valve cap to prevent air leakage.
  6. Place the Cover on the Spa: Carefully lift the inflated cover and place it directly onto the surface of your spa or hot tub water. Ensure it is centered and covers the entire water surface to maximize insulation and protection.
  7. Man placing the inflated cover onto a spa.

    Image: A person is carefully positioning the fully inflated AVENLI CleanPlus cover onto the top of an inflatable spa, ensuring it sits flush and covers the opening.

Operating Instructions

The AVENLI CleanPlus Inflatable Spa & Hot Tub Cover is designed for simple operation to enhance your spa experience.

  • Daily Use: When not using your spa, always keep the cover in place. This will significantly reduce heat loss, minimize evaporation, and keep debris out of the water.
  • Removing the Cover: Before using the spa, carefully lift the cover off the water surface. It is recommended to have two people for larger spas to avoid dragging the cover and potentially damaging it or spilling accumulated water.
  • Storing the Cover (Temporary): When the cover is removed, place it on a clean, dry surface away from sharp objects or direct sunlight for prolonged periods. Avoid folding it tightly while wet.
  • Re-covering the Spa: After using the spa, ensure the water surface is clear of large debris, then carefully place the cover back onto the water, ensuring it is centered and fully covers the spa opening.

Maintenance

Regular maintenance will extend the life of your AVENLI CleanPlus cover and ensure its effectiveness.

  • Cleaning: Periodically clean the top and bottom surfaces of the cover with mild soap and water. Rinse thoroughly with clean water and allow it to air dry completely before storage or re-placement. Avoid harsh chemicals or abrasive cleaners.
  • Inspection: Regularly inspect the cover for any signs of wear, punctures, or air leaks. Small punctures can often be repaired with a vinyl repair kit (not included).
  • Inflation Check: Check the inflation level periodically. If the cover feels soft or sags, re-inflate it to the recommended firmness.
  • Winter Storage (if applicable): If storing the spa and cover for winter, ensure the cover is completely clean and dry. Deflate it fully, fold it neatly, and store it in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

ProblemPossible CauseSolution
Cover is losing air / deflating.Loose valve cap, small puncture, seam leak.Ensure valve cap is tightly closed. Inspect for punctures; use a vinyl repair kit for small holes. If a seam leak, contact customer support.
Spa water is not staying warm.Cover not fully inflated, cover not properly centered, extreme ambient temperature.Re-inflate cover to optimal firmness. Ensure cover is fully centered and covers the entire spa opening. Consider additional insulation for the spa itself in very cold weather.
Debris accumulating on spa water despite cover.Cover not properly sealed, gaps around the edges.Ensure the cover is correctly sized for your spa and is placed flush against the spa's rim. Check for any obstructions preventing a tight seal.

Specifications

FeatureDetail
Product Dimensions (L x W x H)125 x 125 x 18 cm (inflated)
Weight2.22 kg
Model NumberAVENLISPACOVER
MaterialVinyl
ShapeRound
Special FeatureInflatable
Dimensions of the AVENLI CleanPlus spa cover: 125cm diameter and 18cm height.

Image: The AVENLI CleanPlus inflatable spa cover with its dimensions indicated: 125 cm diameter and 18 cm height.

Additional Product Views

Top view of the AVENLI CleanPlus inflatable spa cover, showing its ribbed design.

Image: A top-down view of the AVENLI CleanPlus inflatable spa cover, highlighting its segmented, ribbed design for insulation.

Side view of the AVENLI CleanPlus inflatable spa cover.

Image: A side profile view of the AVENLI CleanPlus inflatable spa cover, showing its thickness and overall shape.

AVENLI CleanPlus spa cover installed on a hot tub in an outdoor setting.

Image: The AVENLI CleanPlus inflatable cover in use, placed on top of a hot tub in an outdoor patio setting, demonstrating its fit and appearance.

Product packaging for the AVENLI Inflatable Round Cover.

Image: The retail packaging for the AVENLI Inflatable Round Cover, showing the product name and an image of the cover on a spa.

© 2024 AVENLI. All rights reserved.

For customer support, please visit www.avenli.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.