Hatteker Professional Hair Clipper RFC6918 User Manual

1. Safety Information

Always unplug the hair clipper before cleaning. Keep away from children. Do not use near water. Avoid contact with eyes and face. Do not ingest or inhale small parts. Always supervise children when using this product.

2. Package Contents

Verify that all items listed below are included in your package:

• 1 x Hatteker Hair Clipper
• 1 x Comb
• 8 x Guide Combs (1.5mm, 3mm, 4.5mm, 6mm, 10mm, 13mm, 16mm, 19mm)
• 1 x USB Charging Cable
• 1 x Cleaning Brush
• 1 x Protective Cover

Image: Hatteker Hair Clipper with all included accessories.

3. Product Features

• Professional Blades: Equipped with self-sharpening stainless steel blades for precise trimming and durability.
• Powerful Motor: Features a high-tech motor for efficient and accurate trimming.
• Long-lasting Battery: Built-in lithium-ion battery provides up to 180 minutes of run time after a 3-hour charge.
• LED Digital Display: Shows the remaining battery percentage (0-100%) and indicates low battery at 05%.
• Ergonomic Design: All-metal body designed for comfortable handling and an adjustable taper lever for varying cutting lengths.
• Low Noise Operation: Engineered to operate with minimal noise, suitable for various environments.

Product Overview and Dimensions

Image: Detailed view of the clipper components and dimensions.

Motor and Blade Technology

Image: Internal view of the motor and blade mechanism.

Image: Close-up of the clipper's self-sharpening blades.

Quiet Operation

Image: Illustration of the clipper's low noise level.

4. Setup

4.1 Initial Charging

Before first use, fully charge the hair clipper. Connect the USB charging cable to the charging port on the clipper and to a compatible USB power source (e.g., laptop, power bank, USB adapter). The LED digital display will show the charging progress.

Image: Clipper charging via USB.

A full charge takes approximately 3 hours and provides up to 180 minutes of working time.

4.2 Attaching Guide Combs

Select the desired guide comb for your preferred hair length. Align the comb with the clipper blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.

5. Operating Instructions

5.1 Power On/Off

Press the power button located on the front of the clipper to turn it on. Press the button again to turn it off.

5.2 Adjusting Taper Lever

The clipper features an adjustable taper lever on the side. Move the lever up or down to change the closeness of the cut, allowing for fine adjustments to hair length without changing guide combs. The available settings are 0.8mm, 1.5mm, 2.2mm, 2.9mm, and 3.6mm.

Image: Adjusting the taper lever for precise cutting lengths.

5.3 Battery Display

The integrated LED digital display shows the current battery percentage. When the display flashes '05', it indicates that the battery is low and requires recharging.

Image: LED digital display indicating battery level.

6. Maintenance

6.1 Cleaning the Blades

After each use, turn off and unplug the clipper. Use the provided cleaning brush to remove any loose hair from the blades and the clipper body. For a more thorough cleaning, the blades can be carefully detached and rinsed under running water. Ensure blades are completely dry before reattaching.

6.2 Oiling the Blades

Regularly apply a small amount of clipper oil (not included) to the blades to maintain their sharpness and ensure smooth operation. Turn on the clipper for a few seconds after oiling to distribute the oil evenly.

7. Troubleshooting

• Clipper not turning on: Ensure the clipper is charged. If the battery is low, connect it to the charger.
• Clipper not cutting effectively: Check if the blades are clean and free of hair. Ensure the blades are properly oiled. Verify that the guide comb is correctly attached.
• Unusual noise during operation: Clean and oil the blades. If the issue persists, contact customer support.
• Battery not charging: Check the USB cable and power source connection. Ensure the charging port is clean.

8. Specifications

9. Customer Support

For any questions, concerns, or technical assistance regarding your Hatteker Professional Hair Clipper, please contact Hatteker customer support through the retailer's platform or the official Hatteker website.