Introduction
This manual provides essential information for the safe and efficient use of your OnePlus Ace Pro 10T PGP110 smartphone. Please read this guide thoroughly before using your device to ensure optimal performance and longevity. Keep this manual for future reference.
Figure 1: Front and back view of the OnePlus Ace Pro 10T PGP110 smartphone.
1. Initial Setup
1.1 Unboxing and Package Contents
Verify that your package contains the following items:
- OnePlus Ace Pro 10T PGP110 Smartphone
- USB Cable
- Quick Start Guide (may vary by region)
- SIM Ejector Tool (may vary by region)
- Power Adapter (may vary by region)
1.2 Inserting SIM Cards
The OnePlus Ace Pro 10T supports Dual-SIM functionality. Follow these steps to insert your SIM card(s):
- Locate the SIM card tray on the side of the device.
- Insert the SIM ejector tool into the small hole next to the tray and press firmly until the tray pops out.
- Place your Nano-SIM card(s) into the tray with the gold contacts facing down. Ensure proper orientation as indicated on the tray.
- Carefully reinsert the SIM card tray into the phone.
Figure 2: Side view of the smartphone showing the SIM card tray location.
1.3 Powering On and Initial Configuration
To power on your device, press and hold the Power button located on the side until the OnePlus logo appears. Follow the on-screen instructions to complete the initial setup, including language selection, Wi-Fi connection, Google account setup, and security settings.
2. Basic Operation
2.1 Display and Navigation
The device features a 6.7-inch Fluid AMOLED FHD+ display with a 120Hz refresh rate. Navigate the interface using touch gestures:
- Tap: Select an item or open an application.
- Swipe: Scroll through screens or lists.
- Pinch: Zoom in or out on images and web pages.
- Long Press: Access contextual menus or move icons.
2.2 Making Calls and Sending Messages
Use the Phone app to make calls and the Messages app to send SMS/MMS. Ensure your SIM card is active and has network coverage.
2.3 Camera Usage
The OnePlus Ace Pro 10T is equipped with a triple rear camera system (50MP+8MP+2MP) and a 16MP front camera. Open the Camera app to capture photos and videos. Various modes and settings are available within the app.
Figure 3: Close-up view of the triple rear camera system.
2.4 Charging the Device
Connect the provided USB cable to the phone's USB-C port and the power adapter. Plug the adapter into a wall outlet. The device supports 150W SuperVOOC fast charging. Only use approved chargers and cables.
Figure 4: Bottom view of the smartphone, highlighting the USB-C charging port.
3. Maintenance and Care
3.1 Cleaning Your Device
Use a soft, lint-free cloth to clean the screen and body of your phone. Avoid using harsh chemicals or abrasive materials. Do not expose the device to excessive moisture.
3.2 Software Updates
Regularly check for and install software updates to ensure your device has the latest features, security patches, and performance improvements. Navigate to Settings > About device > OxygenOS version to check for updates.
3.3 Battery Care
To prolong battery life, avoid extreme temperatures. It is recommended to keep the battery charge between 20% and 80% for optimal long-term health. Avoid leaving the phone plugged in for extended periods after it is fully charged.
4. Troubleshooting Common Issues
This section addresses common issues you might encounter with your OnePlus Ace Pro 10T PGP110.
4.1 Device Not Powering On
- Ensure the battery is charged. Connect the device to its charger for at least 15 minutes.
- Perform a forced restart by holding the Power button and Volume Up button simultaneously for about 10-15 seconds.
4.2 Network Connectivity Issues
- Check if your SIM card is properly inserted and active.
- Verify that Airplane Mode is off (Settings > Wi-Fi & network > SIM & network).
- Restart the device.
- Reset network settings (Settings > System settings > Reset phone > Reset Wi-Fi, mobile & Bluetooth).
4.3 Display Not Responding
- Perform a forced restart (see 4.1).
- Ensure the screen is clean and free of moisture.
4.4 Charging Problems
- Use only the original OnePlus charger and USB cable.
- Check the charging port for any debris.
- Try a different power outlet.
5. Product Specifications
Below are the key technical specifications for the OnePlus Ace Pro 10T PGP110 smartphone:
| Feature | Specification |
|---|---|
| Model Name | OnePlus 10T |
| Operating System | OxygenOS (based on Android 12) |
| Processor | Qualcomm Snapdragon 8+ Gen 1 |
| RAM | 16 GB |
| Internal Storage | 256 GB UFS3.1 |
| Display | 6.7-inch Fluid AMOLED FHD+, 120Hz Refresh Rate |
| Rear Camera | 50MP + 8MP + 2MP Triple Camera |
| Front Camera | 16MP |
| Battery Capacity | 4800 mAh |
| Charging | 150W SuperVOOC Fast Charging |
| Connectivity | 5G, Wi-Fi, Bluetooth, GPS |
| Dimensions | 9.49 x 3.94 x 2.05 inches (Package) |
| Weight | 1.57 pounds (Item) |
6. Warranty and Support
For detailed warranty information, please refer to the warranty card included in your product packaging or visit the official OnePlus website. Keep your proof of purchase for warranty claims.
6.1 Customer Support
If you encounter issues not covered in this manual or require further assistance, please contact OnePlus customer support through their official channels. You can find more information and support resources on the OnePlus Store on Amazon or the official OnePlus website.
