HYPERLITE LED Wall Pack Light 50W Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your HYPERLITE LED Wall Pack Light 50W. This high-efficiency outdoor lighting fixture is designed for various applications including workshops, yards, shops, warehouses, barns, and factories, offering significant energy savings and a long operational lifetime. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Safety Information

• Always disconnect power before installation, maintenance, or cleaning.
• Installation should be performed by a qualified electrician in accordance with local electrical codes.
• Ensure the mounting surface can support the weight of the fixture.
• Do not operate the fixture with damaged wiring or components.
• Avoid direct eye exposure to the light source when the fixture is powered on.
• This product is designed for outdoor use and is IP65 waterproof.

3. Package Contents

Verify that all components are present and undamaged upon opening the package:

• HYPERLITE LED Wall Pack Light 50W
• PC Lens (Pre-installed)
• Mounting Hardware (Screws, anchors)
• Instruction Manual

Figure 3.1: Product packaging showing the HYPERLITE LED Wall Pack Light 50W.

4. Specifications

Figure 4.1: Product dimensions of the HYPERLITE LED Wall Pack Light.

5. Installation Instructions

Follow these steps for a safe and proper installation:

1. Preparation: Ensure power to the installation area is turned off at the circuit breaker. Gather necessary tools (screwdriver, wire strippers, drill, etc.).
2. Open the Cover: Use a screwdriver to open the cover of the wall pack light fixture.
3. Mounting the Base: Secure the light source part (base plate) to the desired wall or mounting surface using appropriate screws and anchors. Ensure it is firmly attached.
4. Wiring Connections: Connect the fixture's leads to the supply leads from your electrical system. Typically, this involves connecting the black wire to live, white wire to neutral, and green/bare wire to ground. Ensure all connections are secure and insulated with wire nuts.
5. Close the Cover: Carefully hinge and close the cover, ensuring all wires are tucked safely inside and the cover is securely fastened.
6. Restore Power: Turn on the power at the circuit breaker.

Figure 5.1: Visual guide for the installation process.

6. Operating Instructions

6.1 Dusk-to-Dawn Photocell Function

The HYPERLITE LED Wall Pack Light is equipped with a smart dusk-to-dawn photocell sensor. This sensor automatically detects ambient light levels:

• The light will automatically turn ON at sundown or when ambient light levels are low (night).
• The light will automatically turn OFF at sunrise or when ambient light levels are high (daytime).

Figure 6.1: Illustration of the photocell's automatic ON/OFF function.

6.2 Disabling the Photocell (Optional)

If you prefer to disable the dusk-to-dawn photocell function and control the light manually (e.g., via a wall switch), you can use the provided black cap. Place the black cap over the photocell sensor to block light, which will keep the fixture on continuously when power is supplied.

Figure 6.2: How to disable the photocell using the black cap.

7. Maintenance

The HYPERLITE LED Wall Pack Light is designed for minimal maintenance. However, periodic cleaning can help maintain optimal performance and appearance.

• Cleaning: Ensure power is disconnected before cleaning. Use a soft, damp cloth to wipe down the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or lens.
• Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or wear. If any issues are found, disconnect power and consult a qualified electrician or contact customer support.

Figure 7.1: The IP65 waterproof design ensures durability and low maintenance.

8. Troubleshooting

9. Warranty and Support

HYPERLITE provides a reliable service commitment for this product:

• 1-Year Defect Replacement: HYPERLITE will deliver a new wall pack to you if any defects occur within 1 year of purchase.
• 5-Year Technical Solution: Quick technical solutions are available for 5 years from the date of purchase.

For technical assistance, warranty claims, or any other inquiries, please contact HYPERLITE customer support through the official website or your purchase platform.