Introduction
This instruction manual provides detailed guidance for the assembly, operation, maintenance, and troubleshooting of your Yaheetech Barstools. Please read this manual thoroughly before use to ensure proper function and safety.
Image: The Yaheetech Barstools, featuring a light gray upholstered seat with a black adjustable base.
Safety Information
WARNING:
Do not exceed the maximum weight capacity of 299.3 pounds. Ensure all components are securely fastened before use. Regularly inspect the barstools for any loose parts or damage. Keep children away from the assembly area and small parts.
Product Features
- Time-tested Quality: Crafted from thick, high-density foam, soft, durable PU leather, heavy-duty metal components, and a certified air lift rod.
- Design Options: Available in industrial dark brown and classic light gray, featuring elegant light-colored patterns and chic buttons, complemented by a matte black iron base and rod.
- Convenient 360° Swivel Seat: Allows for easy rotation without needing to reposition the stool.
- Adjustable Height: Seat height adjusts from 25 to 33.3 inches, and footrest height from 8.3 to 16.7 inches, accommodating various users and table types.
- Ergonomic and Anti-fatigue Design: The seat is padded with anti-deform thick foam and covered by tear & wear-resistant PU leather. It measures 48 x 47.7 cm (20 x 18.8 inch) and includes a curved backrest, armrest, and footrest for comfort.
Image: Illustration of the ergonomic design of the barstool seat, highlighting lumbar support.
Image: Detail of the premium faux leather material, emphasizing its breathable, soft, and wear-resistant properties.
Image: Visual representation of the barstool's free height adjustment and 360-degree smooth rotation capabilities.
Package Contents
Before assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Barstool Seat (2x)
- Gas Lift Cylinder (2x)
- Base Plate (2x)
- Footrest Ring (2x)
- Assembly Hardware (Screws, Washers, Allen Wrench)
- Instruction Manual (This document)
Setup and Assembly
Assembly is required for this product. Please follow these general steps. Refer to the included diagram for specific part identification.
- Unpack all components and lay them out on a clean, soft surface to prevent scratching.
- Attach the footrest ring to the gas lift cylinder. Ensure it is securely in place.
- Insert the gas lift cylinder into the center hole of the base plate.
- Align the seat plate (underneath the seat cushion) with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen wrench. Ensure all screws are tightened firmly but do not overtighten.
- Test the stability of the assembled barstool before full use.
Image: Dimensional diagram of the barstool, useful for understanding assembly and fit.
Operating Instructions
- Height Adjustment: To adjust the seat height, locate the lever under the seat. While seated, pull the lever upwards to lower the seat. To raise the seat, stand up and pull the lever upwards. Release the lever at the desired height.
- Swivel Function: The seat is designed to rotate 360 degrees. Simply turn the seat in the desired direction.
Maintenance and Care
- Cleaning: Wipe the barstool with a dry cloth to remove dust and spills. For stubborn stains on the PU leather, use a slightly damp cloth with mild soap, then wipe dry immediately. Avoid abrasive cleaners or harsh chemicals.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Weight Capacity: Do not exceed the maximum weight capacity of 299.3 pounds to prevent damage and ensure safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Barstool wobbles | Loose assembly screws or uneven floor. | Check and tighten all assembly screws. Ensure the barstool is on a flat, even surface. |
| Height adjustment not working | Gas lift cylinder malfunction or lever obstruction. | Ensure the lever is not obstructed. If the gas lift is faulty, it may need replacement. Contact customer support. |
| Squeaking noise | Friction between parts. | Apply a small amount of silicone lubricant to moving parts, such as the gas lift or swivel mechanism. |
Specifications
| Attribute | Detail |
|---|---|
| Model Number | YT-00117831-001 |
| Color | Light Grey |
| Material | Faux Leather, Foam, Iron |
| Overall Dimensions (D x W x H) | 19.9"D x 21.5"W x 36.5"H (Adjustable to 45"H) |
| Seat Depth | 15.7" |
| Seat Height Range | 25" - 33.3" |
| Footrest Height Range | 8.3" - 16.7" |
| Maximum Weight Capacity | 299.3 lbs |
| Item Weight (per stool) | Approximately 17.5 lbs (35 lbs for 2) |
| Assembly Required | Yes |
Image: Comprehensive view of various design elements and functional parts of the barstool.
Warranty and Support
Yaheetech products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Yaheetech website. If you encounter any issues or require assistance, please contact Yaheetech customer support directly.
You can typically find contact information on the product packaging or the brand's official website: Yaheetech Amazon Store