KICKER 6.5 inch CS Series Speaker Upgrade Kit

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KICKER 6.5 inch CS Series speaker upgrade kit, specifically designed for Ford Focus models from 2012 to 2018. This kit includes two pairs of KICKER 6.5 inch speakers, along with car-specific speaker harnesses and mounting adapters for a seamless upgrade.

2. Package Contents

Please verify that all components listed below are included in your package:

• 2 Pairs of KICKER 46CSC654 6.5 inch CS Series 2-Way Coaxial Car Speakers
• 2 Pairs of Vixen Go VGH-72-5602 Speaker Harnesses
• 2 Pairs of Vixen Go VGB6502 Speaker Mounting Adapters (for Ford Focus 2012-2018)

Image 2.1: Overview of the KICKER speaker upgrade kit components.

3. Specifications

Image 3.1: Detailed view of a KICKER CS Series speaker.

Image 3.2: Side profile of the KICKER CS Series speaker, showing its shallow mounting depth.

4. Setup and Installation

The KICKER speaker upgrade kit is designed for straightforward installation in your Ford Focus (2012-2018) without the need for cutting factory wires. Follow these steps for proper installation:

4.1. Important Disclaimer

Image 4.1: OEM Speaker Kit Disclaimer regarding vehicle compatibility.

Note: Vehicle specifications can differ due to specific trims or premium audio systems. Always check your specific vehicle to ensure fit. Consult a professional installer if unsure, to prevent interference with windows or other OEM parts. Retain all factory screws and fasteners as they may be needed.

4.2. Visual Installation Guide

For a comprehensive visual guide on installing aftermarket speakers, brackets, and wire harnesses, please refer to the video below:

4.3. Speaker and Adapter Assembly

1. Identify the car-specific mounting bracket (speaker adapter) provided in the kit. Unlike some installations, the speaker will be mounted from behind the adapter.
2. Align the holes on the KICKER speaker with the holes on the mounting adapter. Ensure they line up perfectly.
3. Use the screws provided with your KICKER speakers to secure the speaker to the adapter. If the provided screws are not the correct size for your specific application, you may need to use smaller or larger screws, or washers for a tighter fit.

Image 4.3: Speaker mounting adapters included in the kit.

4.4. Wiring Harness Connection

1. Locate the car-specific wiring harnesses (Vixen Go VGH-72-5602) included in your kit. These harnesses are designed to connect directly to your vehicle's factory speaker connector, eliminating the need for cutting or splicing wires.
2. Connect the wires from the KICKER speaker to the appropriate terminals on the back of the speaker. Ensure a secure connection.
3. Plug the car-specific wiring harness into the corresponding connector on the back of the assembled speaker and adapter unit.
4. Connect the other end of the car-specific wiring harness directly to your vehicle's factory speaker wiring. This provides a plug-and-play installation.

Image 4.4: Speaker wiring harnesses for direct connection.

5. Operating Instructions

Once installed, your KICKER CS Series speakers will operate with your vehicle's existing audio system. No special operating procedures are required beyond the normal use of your car stereo. Ensure your head unit's volume is adjusted appropriately to prevent distortion and potential damage to the speakers.

6. Maintenance

KICKER CS Series speakers are designed for durability and require minimal maintenance. Follow these general guidelines:

• Cleaning: Use a soft, dry cloth to wipe down the speaker grilles and surrounds. Avoid using harsh chemicals or abrasive cleaners.
• Protection: The UV-treated poly-foam surround resists heat and direct sunlight, but prolonged exposure to extreme conditions should be minimized.
• Inspection: Periodically check the speaker connections and mounting for any looseness or signs of wear.

7. Troubleshooting

If you encounter issues with your KICKER speakers, consider the following common troubleshooting steps:

• No Sound:
  • Check all wiring connections at the speaker and the vehicle's factory harness. Ensure they are secure.
  • Verify that your car stereo is powered on and functioning correctly.
  • Check the balance and fader settings on your stereo to ensure sound is directed to all speakers.
• Distorted Sound:
  • Reduce the volume level on your car stereo.
  • Check for loose connections or damaged speaker wires.
  • Ensure the speakers are securely mounted and not vibrating against the door panel or other surfaces.
• Intermittent Sound:
  • Inspect all wiring for any breaks, pinches, or corrosion.
  • Ensure the speaker harnesses are fully seated in their connectors.

If problems persist after attempting these steps, it is recommended to consult a professional car audio technician.

8. Warranty and Support

KICKER products are manufactured to high standards. For specific warranty information and terms, please refer to the documentation provided with your original purchase or visit the official KICKER website. For technical support or service inquiries, please contact KICKER customer service directly.