Introduction
Thank you for choosing the LUTEC Outdoor Solar Lamp Post Light. This solar-powered fixture is designed to provide reliable illumination for your garden, patio, pathway, or yard. Featuring a durable aluminum construction, patterned glass, and a built-in dusk-to-dawn sensor, it offers an energy-efficient and aesthetically pleasing lighting solution. This manual provides essential information for the safe installation, operation, and maintenance of your lamp post light.
Safety Information
- Read all instructions carefully before installation and use.
- Ensure the solar panel receives direct sunlight for optimal charging performance.
- Do not attempt to modify or disassemble the product beyond what is described in this manual.
- Keep away from open flames or extreme heat sources.
- Dispose of batteries according to local regulations.
Package Contents
Please verify that all components are present before beginning installation:
- Lamp Head with integrated solar panel
- Lamp Post sections
- Base for pole mounting
- 1 x E26 200 Lumen LED Bulb (pre-installed or included separately)
- 1 x Lithium Ion Battery (pre-installed)
- Mounting Hardware (screws, anchors)
- Instruction Manual
Setup and Installation
Follow these steps to assemble and install your solar lamp post light:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface.
- Assemble the Post: Connect the lamp post sections securely. Ensure all connections are tight.
- Attach the Base: Secure the base to the bottom of the assembled post using the provided hardware.
- Install the Lamp Head: Carefully attach the lamp head to the top of the post. Ensure the wiring (if any visible) is properly connected and secured.
- Select Location: Choose an outdoor location that receives at least 5-6 hours of direct sunlight daily for optimal charging. Avoid areas under heavy shade or near other strong light sources that might interfere with the dusk-to-dawn sensor.
- Mount the Post: Secure the lamp post base to a stable surface (e.g., concrete pad, wooden deck) using the appropriate mounting hardware. Ensure the post is vertical and stable.
- Activate the Light: Locate the ON/OFF switch, typically inside the lamp head or near the bulb socket. Switch it to the "ON" position.
An image showing the complete LUTEC Outdoor Solar Lamp Post Light installed in an outdoor setting.
An image detailing the product's dimensions (9.06in x 9.06in x 85.24in) and highlighting features like 4 solar panels, an E26 replaceable warm white bulb, and durable aluminum body with patterned glass.
A close-up view of the lamp head showing the ON/OFF button, allowing flexible control over lighting time.
Operating Instructions
The LUTEC Solar Lamp Post Light is designed for automatic operation:
- Automatic Dusk-to-Dawn: Once the ON/OFF switch is set to "ON", the integrated sensor will automatically turn the light on at dusk and turn it off at dawn.
- Solar Charging: The solar panels will automatically charge the internal battery during daylight hours. A minimum of 5 hours of direct sunlight is recommended for a full charge.
- Lighting Duration: With a full charge, the light can operate for more than 9 hours at night.
- Manual Override: Use the ON/OFF switch to manually turn the light off if desired, for example, during extended periods of non-use or storage.
Graphic illustrating the lamp post automatically turning off at dawn after charging for 5 hours, and turning on at dusk for up to 9 hours.
Maintenance
Regular maintenance ensures optimal performance and longevity of your solar lamp post light:
- Cleaning Solar Panel: Periodically wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures efficient charging.
- Cleaning Glass: Clean the patterned glass shade with a mild glass cleaner and a soft cloth to maintain light output and appearance.
- Battery Replacement: The internal Lithium Ion battery is replaceable. If the light duration significantly decreases over time, the battery may need replacement. Refer to the diagram for battery access. Use only compatible replacement batteries.
- Bulb Replacement: The E26 LED bulb is replaceable. If the bulb fails, replace it with a new E26 LED bulb of similar specifications (200 Lumen, warm white).
An image highlighting the internal metal reflector and the location of the replaceable battery within the lamp head.
Troubleshooting
If you encounter issues with your lamp post light, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on at night. | 1. ON/OFF switch is in "OFF" position. 2. Insufficient sunlight for charging. 3. Solar panel is dirty. 4. Battery is depleted or faulty. 5. Sensor interference. | 1. Ensure switch is in "ON" position. 2. Relocate to an area with more direct sunlight. 3. Clean the solar panel. 4. Replace the battery. 5. Ensure no other light sources are activating the sensor. |
| Light is dim or runs for a short duration. | 1. Insufficient charging. 2. Solar panel is dirty. 3. Battery capacity reduced. | 1. Ensure optimal sunlight exposure. 2. Clean the solar panel. 3. Replace the battery. |
| Light flickers. | 1. Loose bulb connection. 2. Low battery charge. | 1. Check and tighten the E26 bulb. 2. Allow for a full day of charging. If issue persists, replace battery. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LUTEC |
| Model Name | 6906101012 |
| Color | Black |
| Material | Aluminum, Glass |
| Style | Vintage |
| Product Dimensions | 9.06"L x 9.06"W x 85.24"H |
| Power Source | Solar Powered |
| Installation Type | Pole Mount |
| Special Feature | Waterproof (IP65 Rated) |
| Light Source Type | LED |
| Bulb Base | E26 |
| Brightness | 200 Lumen |
| Light Color | Warm White (2700K) |
| Battery | 1 x Lithium Ion (included, replaceable) |
| Item Weight | 11.97 pounds |
| Lifespan | 50,000+ Hours (LED) |
Image showing the lamp post in rain, emphasizing its IP65 waterproof rating and resistance to heat, frost, wind, and rust.
Details on the solar light's performance: 200 Lumen brightness, 2700K warm white light, replaceable battery, and over 50,000 hours lifespan.
Warranty and Support
LUTEC provides 7*24h after-sales service for this product. If you have any questions, concerns, or require technical assistance, please contact our customer support team. For more information, you may visit the official LUTEC store online.
Contact Information: Refer to your purchase documentation or the LUTEC official website for the most current contact details.