Introduction
The CARELIVING BGM101 Blood Glucose Monitor Kit is designed to provide accurate and reliable blood glucose measurements for effective diabetes management. This kit is equipped with advanced technology for a user-friendly experience, offering quick results and memory storage for tracking your blood sugar levels.
What's in the Box
Your CARELIVING BGM101 Diabetes Test Kit includes the following components:
- 1 Blood Glucose Monitor
- 100 Test Strips
- 100 Lancets
- 1 Lancing Device
- 1 Control Solution
- 1 Product Instruction Manual
- 1 Quick Start Guide
- 1 Carrying Bag
An overview of the complete CARELIVING BGM101 Blood Glucose Monitor Kit, including the meter, test strips, lancets, lancing device, control solution, and carrying bag.
Setup
1. Inserting Batteries
The blood glucose monitor requires 2 AAA batteries (included in the kit). Open the battery compartment on the back of the device and insert the batteries, ensuring correct polarity. Close the compartment securely.
2. Setting Up the Lancing Device
- Unscrew the cap of the lancing device.
- Insert a new lancet firmly into the lancet holder.
- Twist off the protective cap from the lancet and save it for safe disposal.
- Replace the lancing device cap.
- Adjust the penetration depth by rotating the top of the cap. There are 12 customizable depth settings to match your comfort level.
- Pull back the cocking mechanism until it clicks, indicating it is ready for use.
The lancing device features 12 customizable depth settings for comfortable blood sampling.
This image highlights the lancing device's micro lancet for minimal pain and a 1µL blood sample requirement. Warm Tip: Do not insert the lancet too deep into the lancing device, otherwise it may not be able to puncture your finger.
3. Inserting a Test Strip
Remove one test strip from the vial and immediately replace the cap tightly to protect the remaining strips from moisture. Insert the test strip into the test port of the blood glucose monitor. The meter will automatically turn on.
A user inserts a test strip into the top slot of the blood glucose meter, which automatically powers on.
Operating Instructions
Performing a Blood Glucose Test
Follow these steps for an accurate blood glucose reading:
- Wash Your Hands: Thoroughly wash your hands with soap and warm water, then dry them completely.
- Prepare the Lancing Device: Load the lancing device with a new lancet and set the desired depth.
- Insert Test Strip: Insert a test strip into the meter. The meter will turn on, display a code, and then a flashing blood drop icon will appear, indicating it's ready for a blood sample.
- Obtain Blood Sample: Press the lancing device firmly against the side of your fingertip and press the release button. Gently squeeze your finger to obtain a small drop of blood (1 µL).
- Apply Blood Sample: Touch the tip of the test strip to the blood drop. The blood will be automatically drawn into the strip.
- Read Results: The meter will count down for 5 seconds, and your blood glucose result will be displayed on the screen.
A visual guide detailing the six simple steps to measure blood glucose: wash hands, load lancing device, insert strip, collect blood, apply blood sample, and get results.
An official video tutorial demonstrating the step-by-step process of using the CareLiving Blood Glucose Meter, including inserting a test strip, preparing the lancing device, and obtaining a blood sample.
Reading and Tracking Results
The CARELIVING BGM101 monitor provides results in less than 5 seconds. It can store up to 350 test results and calculates 14 and 30-day average blood glucose values, helping you track your levels and manage your diabetes treatment effectively.
The blood glucose monitor shows a clear digital reading of 108 mg/dL, indicating ease of readability.
The monitor's memory stores up to 350 test results and provides 14 and 30-day average blood glucose values for effective tracking.
Maintenance
Test Strip Storage
Store test strips in their original vial with the cap tightly closed. Keep them in a cool, dry place between 39.2-86°F (4-30°C). Do not freeze. Discard test strips 3 months after opening the vial. Ensure the code on the vial matches the code on your meter display.
Cleaning the Device
Wipe the meter and lancing device with a soft, damp cloth. Do not immerse the devices in water or use harsh cleaning agents.
Troubleshooting
Factors Affecting Accuracy & Solutions
This table provides common reasons for inaccurate blood sugar readings, such as alcohol on skin or insufficient blood, along with corresponding solutions.
Error Message Description and Solutions
A comprehensive guide to understanding error messages displayed on the monitor, including 'CH' for checking strip, 'E-E' for calibration error, and 'E-U' for used strip, with recommended actions.
Differences in Readings Between Brands
This section clarifies why blood glucose meters from different brands may show varying results due to different algorithms, emphasizing the importance of consulting a healthcare provider.
Specifications
| Feature | Specification |
|---|---|
| Model Name | BGM101 |
| Operating Time | 5 Seconds |
| Battery Cell Composition | Zinc |
| Item Weight | 10.5 ounces |
| Package Dimensions | 7.36 x 7.28 x 2.36 inches |
| Included Components | Blood Glucose Monitor, Test Strips, Lancets, Lancing Device, Control Solution, Instruction Manual, Quick Start Guide, Carrying Bag |
Warranty and Support
We are committed to your satisfaction. If you encounter any product problems or require immediate assistance, please contact us. We guarantee a response and active resolution within 24 hours.
For further information or support, please refer to the detailed product instruction manual included in your kit or visit our official website.