Lamicall GP05&S1 Gooseneck Phone Holder & Tablet Stand User Manual

1. Introduction

This manual provides instructions for the Lamicall GP05 Gooseneck Phone Holder and the Lamicall S1 Tablet Stand. These products are designed to securely hold smartphones and tablets, offering adjustable viewing angles and hands-free operation. Please read this manual carefully before use to ensure proper setup and operation.

2. Product Components

2.1 GP05 Gooseneck Phone Holder

• Flexible Gooseneck Arm: A 38-inch (97 cm) nylon braided arm for adjustable positioning.
• Clamp Base: Secures the gooseneck arm to surfaces up to 3.15 inches (8 cm) thick.
• Phone Clamp: Holds devices between 4 to 7 inches (5-10 cm) wide, featuring a 360-degree rotatable ball joint.

2.2 S1 Tablet Stand

• Stand Base: Stable aluminum alloy base.
• Adjustable Cradle: Supports devices from 4 to 13 inches, allowing for angle adjustment.
• Rubber Pads: Protect devices from scratches and prevent slipping.

3. Setup Instructions

3.1 GP05 Gooseneck Phone Holder Setup

1. Attach Clamp Base: Loosen the screw on the clamp base and slide it onto a stable surface such as a desk, table, or headboard. Tighten the screw firmly until the clamp is secure. Ensure the surface thickness is within 3.15 inches (8 cm).
2. Insert Gooseneck Arm: Insert the end of the flexible gooseneck arm into the opening on the clamp base. Tighten the locking nut to secure the arm in place.
3. Attach Phone Clamp: Screw the phone clamp onto the ball joint at the end of the gooseneck arm. Ensure it is tightened securely.

Image: The GP05 Gooseneck Phone Holder securely clamped to a desk, illustrating the maximum clamp thickness.

Image: The fully assembled GP05 Gooseneck Phone Holder with a smartphone, demonstrating its flexible arm and rotatable clamp.

3.2 S1 Tablet Stand Setup

The Lamicall S1 Tablet Stand typically comes pre-assembled and ready for use. No additional assembly steps are required.

Image: The S1 Tablet Stand supporting a tablet on a table, ready for use.

4. Operating Instructions

4.1 Using the GP05 Gooseneck Phone Holder

1. Insert Device: Gently pull apart the spring-loaded phone clamp and insert your smartphone. Ensure the device is centered and held securely by the rubber pads.
2. Adjust Gooseneck Arm: Bend and shape the flexible gooseneck arm to achieve your desired viewing height and distance. The nylon braided design provides stability.
3. Rotate Device: The phone clamp features a 360-degree rotatable ball joint. Loosen the nut behind the clamp slightly, adjust the device to portrait or landscape orientation, and then tighten the nut to fix the position.

Image: The phone clamp's 360-degree rotation feature, allowing for flexible viewing angles.

Image: Dimensional overview of the GP05 Gooseneck Phone Holder, highlighting its 38-inch arm and compatibility.

4.2 Using the S1 Tablet Stand

1. Place Device: Position your tablet or smartphone onto the cradle of the stand. The rubber pads will help secure the device and prevent scratches.
2. Adjust Viewing Angle: Gently push or pull the top part of the stand to adjust the tilt angle of your device. The stand is designed to hold the angle firmly once set.
3. Charging: The stand features an open design that allows for charging cables to be connected while your device is in use.

Image: The S1 Tablet Stand in use on a desk, providing a stable viewing platform for a tablet.

Image: The S1 Tablet Stand supporting a tablet while it is being charged, demonstrating cable management.

Image: Dimensional diagram of the S1 Tablet Stand, illustrating its adjustable angle and compact size.

5. Maintenance

To ensure the longevity and proper function of your Lamicall stand:

• Cleaning: Wipe the stand with a soft, damp cloth. Avoid using abrasive cleaners or solvents that may damage the finish or rubber components.
• Inspection: Periodically check all connections (clamp screw, gooseneck nut, phone clamp nut) to ensure they remain tight.
• Storage: When not in use, store the stand in a clean, dry place away from extreme temperatures.

6. Troubleshooting

• Gooseneck arm not holding position: Ensure the gooseneck arm is fully inserted into the clamp base and the locking nut is tightened. For the phone clamp, ensure the nut behind the ball joint is tightened after adjustment.
• Stand feels unstable (GP05): Verify that the clamp base is securely fastened to a stable surface and that the surface thickness is within the specified range (up to 3.15 inches).
• Device slipping from clamp/cradle: Ensure your device is properly centered and fully seated within the rubber-padded grips. The GP05 phone clamp supports devices 4-7 inches, and the S1 stand supports 4-13 inches.
• Difficulty adjusting S1 Tablet Stand angle: Apply gentle, firm pressure to adjust the angle. The stand is designed with a stiff hinge to maintain stability once set.

7. Specifications

8. Warranty and Support

For warranty information, technical support, or customer service inquiries, please refer to the official Lamicall website or contact their customer support directly. This manual does not contain specific warranty terms or contact details.

Lamicall Official Website: www.lamicall.com