1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your FORNO Villarosa Electric 30-Inch Built-In Double Wall Oven. Please read all instructions carefully before using the appliance.
The FORNO Villarosa Double Wall Oven features a total net capacity of 10.0 cubic feet (5.0 cubic feet per oven), glass touch controls, and a large LCD display. It includes multiple cooking functions such as convection, broil, bake, and an air-fry function, along with steam cleaning capabilities.
2. Safety Information
Always follow basic safety precautions when using this appliance to reduce the risk of fire, electric shock, or injury to persons.
- Ensure proper installation by a qualified technician in accordance with all local codes and ordinances.
- Do not touch hot surfaces. Use oven mitts or pot holders.
- Never use the oven for storage.
- Keep flammable materials away from the oven.
- Supervise children when they are near the appliance.
- Disconnect power before servicing.
3. Installation and Setup
The FORNO Villarosa Double Wall Oven is designed for built-in installation. Refer to the separate installation guide for detailed instructions on cabinet cutouts and electrical connections.
3.1 Dimensions and Clearance
Ensure adequate space and clearances for proper ventilation and operation. The overall dimensions of the oven are approximately 29.9 inches (W) x 23.5 inches (D) x 51.2 inches (H).

Figure 3.1: Oven Dimensions. This image illustrates the height, width, and depth measurements of the double wall oven for installation planning.
3.2 Electrical Requirements
This appliance requires a 240V, 60 Hz electrical supply. A power cord for 240V installation is included. The oven has a wattage of 8500 watts and requires a 20 Amp circuit.
3.3 Initial Setup
Before first use, remove all packaging materials and accessories from the oven cavities. Clean the interior with a damp cloth. It is recommended to run the oven on a high temperature for about 30 minutes to burn off any manufacturing residues, which may produce a slight odor.








