Vente-unique CHORI Bunk Bed with Storage Drawers and Mattresses (90x190 cm)

Introduction and Safety Information

This manual provides essential instructions for the assembly, operation, and maintenance of your Vente-unique CHORI Bunk Bed. Please read all instructions carefully before assembly and use to ensure safe operation and longevity of the product.

Important Safety Warnings:

• The upper bunk is not suitable for children under six years of age.
• Ensure all assembly hardware is securely tightened before use. Periodically check and re-tighten as necessary.
• Do not allow children to play on or under the bunk bed without supervision.
• Use only mattresses of the specified size (90 x 190 cm) to prevent gaps that could trap a child.
• The maximum weight capacity for each bed is 120 kg. The maximum weight capacity for each drawer is 10 kg.
• Always use the ladder for access to the upper bunk. Do not use alternative methods.
• Keep small parts out of reach of children during assembly.
• This product is designed for indoor use only.

Package Contents

Verify that all components are present before beginning assembly. If any parts are missing or damaged, contact Vente-unique customer support.

• 1 x CHORI Bunk Bed Frame (White Pine)
• 2 x Slatted Bed Bases (30 slats each)
• 2 x Storage Drawers
• 2 x DANA Mattresses (90 x 190 cm)
• Assembly Hardware (screws, bolts, dowels, etc.)
• Assembly Instructions (this document)

Image: The Vente-unique CHORI bunk bed in a room setting, showing the white pine frame, two sleeping levels, and two pull-out storage drawers. Mattresses are included, and the bed features a house-shaped frame on the top bunk.

Setup and Assembly

Assembly of the Vente-unique CHORI Bunk Bed requires two adults. Please follow the steps below carefully. Tools required: Phillips head screwdriver, Allen wrench (usually included).

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Assemble Bed Frames: Begin by assembling the side rails and end panels for both the upper and lower bed frames. Ensure all bolts are finger-tightened initially.
3. Install Slatted Bases: Insert the wooden slats into the designated slots on both bed frames. Secure them according to the provided hardware.
4. Attach Ladder: Securely attach the ladder to the bunk bed frame. Verify that the rungs are stable and firmly fixed.
5. Assemble Storage Drawers: Construct the two storage drawers using the provided panels and hardware. Install the wheels or glides as instructed.
6. Position Drawers: Slide the assembled drawers under the lower bunk.
7. Final Tightening: Once the entire structure is assembled, systematically tighten all bolts and screws using the appropriate tools. Do not overtighten.
8. Place Mattresses: Position the 90 x 190 cm mattresses on both the upper and lower slatted bases.

Image: A view of the Vente-unique CHORI bunk bed frame showing the wooden slatted bases installed on both the upper and lower bunks, ready for mattresses. The house-shaped frame is visible at the top.

Image: The Vente-unique CHORI bunk bed with both integrated storage drawers partially pulled out, demonstrating their functionality and capacity for storing items under the lower bunk.

Operating and Usage

The CHORI Bunk Bed is designed for comfortable and safe sleeping for two individuals. Observe the following guidelines for proper use:

• Upper Bunk: Only children aged 6 years and older should use the upper bunk.
• Access: Always use the provided ladder to access the upper bunk. Ensure the ladder is stable before climbing.
• Weight Limits: Do not exceed the maximum weight capacity of 120 kg per bed. The storage drawers have a maximum capacity of 10 kg each.
• Mattress Compatibility: Use only 90 x 190 cm mattresses with this bunk bed.
• Storage Drawers: The two integrated drawers are suitable for storing lightweight items such as bedding, toys, or clothes. Avoid overloading them.

Maintenance

Regular maintenance will help preserve the condition and safety of your bunk bed.

• Cleaning: Wipe the bed frame with a damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the lacquered finish.
• Hardware Check: Periodically inspect all bolts, screws, and connections to ensure they remain tight. Re-tighten as needed to maintain structural integrity.
• Slats: Check the wooden slats for any signs of damage or wear. Replace any broken slats immediately.
• Mattress Care: Follow the care instructions provided with your DANA mattresses. Rotate and flip mattresses regularly to ensure even wear.
• Drawer Maintenance: Keep the drawer runners clean and free of debris to ensure smooth operation.

Troubleshooting

If you encounter any issues with your Vente-unique CHORI Bunk Bed, refer to the following common solutions:

Specifications

Image: A diagram illustrating the key dimensions of the Vente-unique CHORI bunk bed, including its total height (200 cm), length (196 cm), and depth (96 cm).

Warranty and Support

For warranty information, missing parts, or technical support, please contact Vente-unique customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.

You can visit the official Vente-unique store on Amazon for more information: Vente-unique Amazon Store