1. Introduction
The CPVAN CP8 Door and Window Sensor is designed to enhance the security of your home or office. This sensor is an integral part of the CPVAN CP8 home security system, providing real-time alerts when a protected door or window is opened. This manual provides detailed instructions for the installation, operation, and maintenance of your sensor.
2. Product Overview
The CPVAN CP8 Door and Window Sensor consists of two main components: a main sensor unit and a magnetic strip. When these two parts are separated, the sensor triggers an alarm signal to the CPVAN CP8 receiver.
Image 1: The CPVAN CP8 Door and Window Sensor, showing the main unit and the magnetic component.
Key Features:
- Compatibility: Fully compatible with the CPVAN CP8 home security system.
- Easy Installation: Simple two-step adhesive installation.
- Real-time Alerts: Triggers the receiver and sends real-time notifications when a door or window is opened.
- Extended Range: Offers a transmission distance of up to 260 feet in open areas, ensuring reliable signal without interference.
- Low Battery Indicator: A flashing light on the sensor and an app notification alert you when the battery is low, prompting timely replacement.
3. Setup and Installation
Follow these steps to install your CPVAN CP8 Door and Window Sensor:
- Prepare the Surface: Ensure the surface of the door/window frame and the door/window itself are clean, dry, and smooth for optimal adhesive application.
- Attach the Main Unit: Peel the backing from the double-sided adhesive on the main sensor unit. Attach the main unit to the door or window frame.
- Attach the Magnetic Strip: Peel the backing from the double-sided adhesive on the magnetic strip. Attach the magnetic strip to the door or window, aligning it with the main sensor unit. The gap between the two components should be minimal when the door/window is closed (typically less than 1 cm).
- Test the Sensor: Open and close the door or window to verify that the sensor triggers the CPVAN CP8 system and sends notifications to your connected application.
Image 2: Diagram illustrating how multiple CPVAN sensors, including door/window sensors, integrate into a home security system across different areas of a house.
4. Operating the Sensor
The CPVAN CP8 Door and Window Sensor operates in conjunction with your CPVAN CP8 home security system. Once installed and paired with the system, it monitors the opening and closing of doors and windows.
Modes of Operation:
- Disarmed Mode (Daytime): When the system is disarmed, opening a door or window may trigger a door chime or a silent notification, depending on your system settings. This is useful for monitoring activity without triggering a full alarm.
- Armed Mode (Night/Away): When the system is armed, opening a door or window will immediately trigger the alarm, activating the siren and sending real-time push notifications to your smartphone via the CPVAN application.
Image 3: Illustration of the sensor's operation, showing a door chime in disarmed (daytime) mode and an alarm activation in armed (nighttime) mode.
Image 4: Depiction of the 125dB siren activating when an unauthorized entry is detected, designed to deter intruders.
App Notifications:
The CPVAN application provides real-time push notifications to your smartphone, informing you immediately when a sensor is triggered. You can customize protection zones and receive specific alerts for different doors or windows.
Image 5: A smartphone screen displaying app notifications for customized protection zones, indicating which door or window has been opened.
Image 6: A smartphone receiving a real-time push notification from the CPVAN app when a door sensor is triggered, providing immediate security alerts.
5. Maintenance
Battery Replacement:
The CPVAN CP8 sensor is powered by a CR2032 lithium battery (included). When the battery level is low, the sensor's indicator light will flash constantly, and you will receive a low battery notification through the CPVAN application. To replace the battery:
- Gently open the sensor casing.
- Remove the old CR2032 battery.
- Insert a new CR2032 lithium battery, ensuring correct polarity.
- Close the sensor casing securely.
Cleaning:
Wipe the sensor with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these can damage the device.
6. Troubleshooting
- Sensor Not Triggering:
- Check the alignment of the main unit and the magnetic strip. Ensure they are close enough when the door/window is closed.
- Verify the battery level. Replace the CR2032 battery if it is low.
- Ensure the sensor is properly paired with your CPVAN CP8 system. Refer to your CP8 system manual for pairing instructions.
- No App Notifications:
- Check your smartphone's notification settings for the CPVAN app.
- Ensure your CPVAN CP8 system is connected to the internet.
- Confirm the sensor is correctly configured within the app's protection zones.
- Intermittent Connectivity:
- Relocate the sensor or the CPVAN CP8 receiver to reduce potential signal interference from other electronic devices or large metal objects.
- Ensure the sensor is within the maximum transmission range of 260 feet from the receiver.
7. Specifications
| Feature | Specification |
|---|---|
| Brand | CPVAN |
| Model Number | Tür&Fenster Alarm (CP8 Door and Window Sensor) |
| Control Method | Application |
| Maximum Range | 260 Feet (in open areas) |
| Sensor Technology | Contact Sensor |
| Mounting Type | Adhesive / Wall Mount |
| Product Dimensions (L x W x H) | 7.2 x 3.8 x 1.2 cm |
| Weight | 30 grams |
| Usage Environment | Indoor |
| Power Source | Battery Powered |
| Battery Type | CR2032 Lithium (included) |
| Compatible Devices | CPVAN CP8 Home Security System |
8. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your CPVAN CP8 home security system or visit the official CPVAN website. You may also contact the seller, CPVAN EU, directly for assistance.
