Introduction
This manual provides detailed instructions for the safe and effective use of your BORUIT V3 Mini Keychain Flashlight. Please read this manual thoroughly before operating the device and retain it for future reference. The BORUIT V3 is a compact, high-lumen flashlight designed for everyday carry, emergencies, and various outdoor activities, featuring multiple lighting modes and a durable, waterproof design.
Product Overview
Components
- BORUIT V3 Mini Keychain Flashlight
- USB-C Charging Cable
- Key Ring
Key Features
- High Brightness: Up to 900 lumens with a beam distance of up to 100 meters.
- Compact and Lightweight: Weighs 33g (1.17oz) and measures 56x31x15mm (2.2"x1.2"x0.6").
- Durable Construction: Made from 304 stainless steel and PC materials, IP65 waterproof rating.
- Rechargeable: Built-in 500mAh lithium battery with USB-C charging.
- Magnetic Tail: Allows attachment to metallic surfaces for hands-free use.
- Multiple Lighting Modes: 5 main light modes and 7 side light modes (including UV, Red, Blue).
Figure 1: BORUIT V3 Mini Keychain Flashlight.
Figure 2: High lumen output and long-range illumination.
Setup
Charging the Flashlight
The BORUIT V3 is equipped with a built-in 500mAh rechargeable lithium battery. Before first use, fully charge the device.
- Locate the USB-C charging port on the flashlight.
- Connect the provided USB-C charging cable to the flashlight's port.
- Connect the other end of the cable to a USB-A power source (e.g., computer, wall adapter). Note: Use a USB-A to USB-C cable. USB-C to USB-C cables may not be compatible with all chargers.
- During charging, a red indicator light will flash.
- Once fully charged (approximately 2.5 hours), the indicator light will turn green.
Figure 3: USB-C charging process.
Operating Instructions
The BORUIT V3 features two main buttons: a power button (on/off) and a mode button (lightning bolt icon).
Main Light Modes (Front LEDs)
The main light offers 5 brightness levels: Super Bright, High, Medium, Low, and Economic.
- Momentary Super Bright: Press and hold the power button to activate the Super Bright mode. Release to turn off.
- Constant On (Cycle Modes): Double-click the power button to turn on the main light. Each subsequent single click will cycle through High, Medium, Low, and Economic modes. Press and hold the power button to turn off.
Side Light Modes (Side LEDs)
The side light offers 7 modes: White Light, UV, Red Light, Red Light Flash, Red-Blue Light Flash.
- White Light: Long press the mode button to turn on the white side light. Release to turn off.
- Constant On (Cycle Modes): Double-click the mode button to turn on the side light. Each subsequent single click will cycle through UV, Red Light, Red Light Flash. Press and hold the mode button to turn off.
- Red-Blue Light Flash: Triple-click the mode button to activate the red-blue flashing mode. Press and hold the mode button to turn off.
Figure 4: Overview of Main and Side Lighting Modes.
Figure 5: Using the UV light for currency verification.
Maintenance
Cleaning
To clean the flashlight, wipe it with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the casing or internal components.
Storage
Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong battery life. Recharge every 3-6 months to prevent deep discharge.
Water Resistance
The BORUIT V3 is IP65 rated, meaning it is protected against dust ingress and low-pressure water jets from any direction. It is not designed for submersion. Ensure the USB-C port cover is securely closed to maintain water resistance.
Figure 6: IP65 Waterproof feature.
Troubleshooting
- Flashlight does not turn on:
- Ensure the battery is charged. Connect to a power source using the USB-C cable and check the charging indicator.
- Verify correct button presses for desired mode (single click, double click, long press, triple click).
- Flashlight does not charge:
- Confirm you are using a USB-A to USB-C charging cable. Some USB-C to USB-C cables may not be compatible.
- Try a different USB power source or cable.
- Ensure the charging port is clean and free of debris.
- Light output is dim or inconsistent:
- The battery may be low. Recharge the flashlight.
- Ensure the lens is clean.
Specifications
| Model | BORUIT V3 |
| Brightness | Up to 900 Lumens (Main Light) |
| Beam Distance | Up to 100 meters |
| Battery Capacity | 500mAh Lithium Ion (built-in) |
| Charging Port | USB-C |
| Charging Time | Approx. 2.5 hours |
| Waterproof Rating | IP65 |
| Material | 304 Stainless Steel + PC |
| Dimensions (L x W x H) | 56 x 31 x 15 mm (2.2" x 1.2" x 0.6") |
| Weight | 33 grams (1.17 oz) |
| Light Source Type | LED (White, UV, Red, Blue) |
Figure 7: Detailed product specifications.
Warranty and Support
Warranty Information
Specific warranty details are typically provided with your purchase documentation or on the manufacturer's official website. Please refer to the packaging or contact the seller for information regarding warranty coverage and duration.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty claims, please contact BORUIT customer support through the retailer where the product was purchased or visit the official BORUIT website for contact information.
Manufacturer: FrideMok
