InfiRay InfiRay P2 Pro IOS

Download PDF
Contents

Infiray P2 Pro Thermal Camera User Manual

Model: InfiRay P2 Pro IOS

1. Product Overview

The Infiray P2 Pro is a high-performance thermal imaging camera designed for use with Apple iOS devices. It provides clear and accurate thermal images, making it an essential tool for various applications, from home inspections to professional electrical and mechanical system diagnostics. Its compact size and robust features ensure reliable performance.

Infiray P2 Pro Thermal Camera connected to an iPhone, showing a thermal image of a person.

Figure 1.1: Infiray P2 Pro Thermal Camera connected to an iPhone.

Key Features:

  • High Resolution: 256x192 IR resolution for clear thermal images.
  • Wide Temperature Range: Measures from -4°F to 1112°F (-20°C to 600°C).
  • Smooth Imaging: 25Hz refresh rate minimizes lag.
  • High Sensitivity: 40mk sensitivity for accurate temperature measurements down to 0.1℃.
  • Dual Operating Modes: Normal mode and macro lens mode for detailed close-up inspections.
  • User-Friendly App: Features 11 imaging modes and 3-point temperature measurement.
  • Compact and Portable: Measures 1x0.7x0.38 inches and weighs 0.3 ounce (9 grams).
  • Battery-Free Design: Powered directly by the connected iOS device.

2. Setup and Installation

2.1 Device Compatibility

The Infiray P2 Pro is designed for use with Apple iOS devices. Ensure your device meets the minimum operating system requirements:

  • iPhone: Compatible with iOS 11 and above (e.g., iPhone 6 to iPhone 14/13/12/Pro/Pro MAX/Mini).
  • iPad: Compatible with iPadOS 13 and above (e.g., iPad /Pro/Air/Mini 9th/8th Gen, iPad 5th/iPad Mini 4th/iPad Air 2th).

Note: Not available for Type-C Port devices.

Diagram showing compatibility with various iPhone models.

Figure 2.1: iPhone Compatibility.

Diagram showing compatibility with various iPad models.

Figure 2.2: iPad Compatibility.

2.2 App Download and Installation

  1. Search for and download the official application named "Thermal P2" from the Apple App Store.
  2. Install the application on your compatible iPhone or iPad.

2.3 Connecting the Device

  1. Ensure the "Thermal P2" app is installed and ready on your iOS device.
  2. Carefully plug the Infiray P2 Pro thermal camera into the Lightning port of your iPhone or iPad.
  3. The app should automatically detect the camera and display the thermal image feed. If not, open the "Thermal P2" app manually.

3. Operating Instructions

3.1 Basic Operation

Once connected and the app is running, the Infiray P2 Pro will display a real-time thermal image. The camera operates with a 25Hz refresh rate, providing a smooth viewing experience.

Comparison of thermal image refresh rates: 8Hz fuzzy, 15Hz, and 25Hz smooth.

Figure 3.1: Thermal image clarity at different refresh rates.

3.2 Operating Modes

The camera supports two primary operating modes:

  • Normal Mode: For general thermal imaging, effective within a range of up to 16.4 feet (5 meters).
  • Macro Lens Mode: Attach the included macro lens for highly precise, close-up thermal imaging, revealing fine details of small components or surfaces.

3.3 App Features and Settings

The "Thermal P2" application offers a range of features to enhance your thermal imaging experience:

  • Temperature Measurement: Utilize point, line, and surface temperature-reading modes. The app supports 3-point temperature measurement for specific areas.
  • Color Palettes: Choose from 11 different imaging modes (color palettes) to visualize temperature differences effectively.
  • Temperature Limits: Set custom temperature limits to highlight areas exceeding or falling below specified thresholds.
  • Image Capture: Capture thermal images and videos directly within the app.
  • Gallery: Access and manage your captured thermal images and videos.
Screenshots of the Infiray P2 Pro app interface showing various features like temperature measurement, color palettes, and temperature limits.

Figure 3.2: User-Friendly App Interface.

3.4 MATRIX IV Patented Image Technology

The Infiray P2 Pro incorporates MATRIX IV patented technology, which enhances image detail and clarity, allowing for more precise identification of thermal anomalies.

Comparison of thermal images, one showing standard quality and the other showing enhanced detail with MATRIX IV technology.

Figure 3.3: MATRIX IV Image Technology Comparison.

4. Maintenance

Proper maintenance ensures the longevity and optimal performance of your Infiray P2 Pro thermal camera.

4.1 Cleaning

  • Gently wipe the camera lens and body with a soft, lint-free cloth.
  • For stubborn smudges, use a lens cleaning solution specifically designed for optical surfaces.
  • Avoid using abrasive materials or harsh chemicals that could damage the lens or casing.

4.2 Storage

  • Store the camera in its protective case when not in use to prevent dust and physical damage.
  • Keep the device in a cool, dry place, away from direct sunlight and extreme temperatures.

4.3 Power Consumption

The P2 Pro is battery-free and draws power directly from your iOS device. Its low power consumption of 350mW allows for extended operation:

  • Approximately 6-8 hours of continuous use on a fully charged iPhone.
  • Approximately 8-10 hours of continuous use on a fully charged iPad.

5. Troubleshooting

If you encounter issues with your Infiray P2 Pro, refer to the following common troubleshooting steps:

5.1 Device Not Detected

  • Check Connection: Ensure the camera is securely plugged into the Lightning port of your iOS device.
  • Restart App: Close and reopen the "Thermal P2" application.
  • Restart Device: Restart your iPhone or iPad.
  • Verify App: Confirm you have downloaded the correct app, "Thermal P2", from the App Store. Incorrect apps may not recognize the device.

5.2 Image Quality Issues

  • Clean Lens: Ensure the camera lens is clean and free of dust or smudges.
  • Environmental Factors: Extreme temperatures or humidity can affect thermal image quality. Operate within recommended environmental conditions.

5.3 App Freezing or Crashing

  • Update App: Ensure your "Thermal P2" app is updated to the latest version.
  • Free Up Storage: Ensure your iOS device has sufficient free storage space.
  • Close Other Apps: Close other background applications to free up system resources.

5.4 General Issues

If problems persist after attempting the above steps, please contact customer support for further assistance.

6. Specifications

FeatureSpecification
IR Resolution256 x 192 pixels
Temperature Range-4°F to 1112°F (-20°C to 600°C)
Thermal Sensitivity (NETD)40mk
Refresh Rate25Hz
Operating ModesNormal, Macro Lens
Power Consumption350mW
Dimensions1 x 0.7 x 0.38 inches (25.4 x 17.8 x 9.65 mm)
Weight0.3 ounce (9 grams)
CompatibilityiOS 11+ (iPhone), iPadOS 13+ (iPad)
ManufacturerInfiray
Model NumberInfiRay P2 Pro IOS

7. Warranty and Support

7.1 Warranty Information

The Infiray P2 Pro Thermal Camera comes with a 365-day warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product functions as intended under normal use.

7.2 Customer Service

For any questions, technical assistance, or warranty claims, please contact Infiray customer service. A team of over 20 engineers is available to provide professional support and ensure a user-friendly experience.

Please refer to the official Infiray website or your purchase documentation for the most current contact information.

8. Application Scenarios

The Infiray P2 Pro Thermal Camera is a versatile tool suitable for a wide range of applications, including but not limited to:

  • Home Inspections: Identifying insulation gaps, drafts, and moisture issues.
  • Water Pipe Inspections: Detecting leaks or blockages in plumbing systems.
  • HVAC Troubleshooting: Diagnosing issues with heating, ventilation, and air conditioning systems.
  • Electrical Inspections: Locating overheating components in electrical panels and wiring.
  • Facility Maintenance: General thermal analysis for preventative maintenance.
  • Circuit Board & Mechanical Systems: Pinpointing hot spots or anomalies in electronic circuits and machinery.
  • Floor Heating: Verifying the functionality and evenness of underfloor heating systems.
Collage of images showing various application scenarios for the thermal camera, including home inspections, water pipe checks, HVAC troubleshooting, electrical inspections, facility maintenance, circuit board analysis, floor heating, and mechanical systems.

Figure 8.1: Diverse Application Scenarios.

© 2024 InfiRay. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.