Interstate Batteries 31-AGM7
Contents
Interstate Batteries 31-AGM7 Heavy Duty Marine Deep Cycle Battery User Manual
Model: 31-AGM7
1. Product Overview
The Interstate Batteries 31-AGM7 is a premium heavy-duty marine deep cycle battery designed for both cranking and extreme cycling applications. Utilizing Pure Matrix Power technology, this 12V 100Ah 925CCA AGM battery offers superior performance and extended lifespan compared to conventional batteries. It is engineered for reliability in demanding environments, making it suitable for a wide range of commercial and recreational uses.

Figure 1: Front view of the Interstate Batteries 31-AGM7 battery.
Key features include:
- Commercial Pure Lead AGM: Delivers 400 extreme deep cycles, significantly more than conventional alloy AGM products.
- Extended Storage: Can be stored for up to 2 years, double the duration of conventional AGM batteries.
- Versatile Applications: Ideal for refrigeration units, APU units, uninterruptible power supply, GEM cars, large yachts, oil-field equipment, and trucks requiring high-power and high-energy.
- Enhanced Lifespan: Offers 2-3 times more battery life than conventional flooded batteries and 2 times longer than alloyed lead AGM batteries.
- Pure Matrix Advantage: Provides super-premium battery life and power for starting and accessories, with improved performance in extreme cold temperatures.
2. Safety Information
WARNING: Batteries contain sulfuric acid and produce explosive gases. Always follow safety precautions to prevent injury.
- Always wear eye protection and gloves when handling batteries.
- Do not smoke or allow open flames near batteries.
- Ensure adequate ventilation when charging or working with batteries.
- Keep out of reach of children.
- In case of contact with sulfuric acid, flush immediately with water and seek medical attention.

Figure 2: Top label of the battery showing safety warnings and specifications.
3. Setup and Installation
Proper installation is crucial for the performance and longevity of your Interstate Batteries 31-AGM7. Follow these steps carefully:
- Preparation: Ensure the vehicle or equipment is turned off and the ignition key is removed. Wear appropriate safety gear (gloves, eye protection).
- Old Battery Removal (if applicable):
- Disconnect the negative (-) cable first, then the positive (+) cable.
- Remove any hold-down clamps or straps.
- Carefully lift and remove the old battery. Be aware of its weight (approximately 69.5 lbs).
- Battery Placement:
- Clean the battery tray and cable terminals.
- Place the new Interstate 31-AGM7 battery securely in the battery tray.
- Ensure it is stable and will not shift during operation.
- Cable Connection:
- Connect the positive (+) cable first, then the negative (-) cable.
- Ensure connections are clean and tight to prevent arcing and ensure optimal current flow.
- Apply a thin layer of anti-corrosion grease to the terminals if desired.
- Secure Battery: Reinstall any hold-down clamps or straps to firmly secure the battery.

Figure 3: Example of the 31-AGM7 battery in an application setting.
4. Operating Guidelines
The Interstate 31-AGM7 battery is designed for reliable performance in various demanding applications. To maximize its lifespan and efficiency, consider the following:
- Deep Cycle Use: This battery excels in deep cycle applications, providing sustained power over long periods. Avoid excessively deep discharges if possible, though the battery is built to withstand them.
- Cranking Power: It also provides high cranking power for starting engines, even in challenging conditions.
- Temperature Performance: The Pure Matrix Power technology enhances performance in extreme temperatures, delivering more power at lower temperatures compared to conventional AGM batteries.
- Vibration Resistance: The robust design with Vibratach End Walls and Epoxy Anchor Bonding helps resist damage from vibration, making it suitable for heavy-duty vehicles and marine environments.
5. Maintenance and Storage
While the 31-AGM7 is a maintenance-free, fully sealed AGM battery, proper care ensures optimal performance and longevity.
- Cleaning: Keep the battery top clean and dry. Use a damp cloth to wipe away dirt or grime. Ensure terminals are free of corrosion.
- Terminal Connections: Periodically check that terminal connections are tight and secure. Loose connections can lead to power loss and heat buildup.
- Charging:
- Use a charger compatible with AGM batteries.
- Avoid overcharging, which can damage the battery.
- For optimal lifespan, recharge the battery promptly after discharge.
- Storage:
- If storing the battery for an extended period, ensure it is fully charged before storage.
- Store in a cool, dry place away from direct sunlight and extreme temperatures.
- The 31-AGM7 can be stored for up to 2 years without significant degradation, but periodic checks and a top-off charge every 6-12 months are recommended for very long storage periods.
6. Troubleshooting
If you encounter issues with your Interstate 31-AGM7 battery, consider the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not holding charge | Undercharging, faulty charging system, parasitic drain, end of life. | Check charging system (alternator/charger). Inspect for parasitic drains. Ensure full charge after use. If battery is old, consider replacement. |
| Low cranking power | Low state of charge, loose/corroded terminals, undersized cables. | Fully charge battery. Clean and tighten terminal connections. Verify cable gauge is appropriate for application. |
| Battery appears swollen or damaged | Overcharging, internal short circuit, extreme heat. | Immediately disconnect and replace the battery. Do not attempt to charge or use. Consult a professional. |
| Shortened battery life | Consistent deep discharges without full recharge, extreme operating temperatures, improper charging. | Ensure battery is fully recharged after each use. Optimize charging practices. Protect battery from extreme heat. |
If problems persist, contact Interstate Batteries customer support or a certified technician.
7. Specifications
Detailed specifications for the Interstate Batteries 31-AGM7:

Figure 4: Key performance metrics of the 31-AGM7 battery.
- Model Number: 31-AGM7
- Voltage: 12V
- Capacity: 100Ah
- Cold Cranking Amps (CCA): 925 CCA
- Cranking Amps (CA): 1200 CA
- Reserve Capacity (RC): 190 minutes
- Technology: Pure Lead Absorbed Glass Mat (AGM)
- Item Weight: 69.5 pounds
- Package Dimensions: 16 x 14 x 11.5 inches
- Terminal Type: Marine Terminal
- Special Features: Rechargeable, Gas-Guard Technology, Single Handle, Vibratach End Walls, Epoxy Anchor Bonding, Fully Sealed Design.

Figure 5: Physical dimensions of the 31-AGM7 battery.
8. Warranty and Support
Interstate Batteries stands behind the quality of its products. The 31-AGM7 battery comes with a 36-month free replacement warranty, ensuring peace of mind for your investment.
For warranty claims, technical support, or any questions regarding your battery, please contact Interstate Batteries directly or visit their official website. You can also return the battery to an Interstate All Battery Center for recycling.
Interstate Batteries Contact Information:
- Website: www.interstatebatteries.com
- Customer Service: Refer to the product label or website for the most current contact numbers.
Documents and downloads
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.