CREATE Warm Towel 500W Electric Towel Dryer with 3-Bar Shelf - Instruction Manual

1. Introduction and Product Overview

This manual provides essential information for the safe and efficient use of your CREATE Warm Towel 500W Electric Towel Dryer. This low-consumption electric towel dryer features an ultra-slim design, keeping your towels dry and warm. It also diffuses heat, allowing it to function as a supplementary room heater. The unit can be installed on a wall or placed on the floor if a model with feet is chosen (this specific model includes a 3-bar shelf for wall mounting).

Key features include:

• 3-in-1 Functionality: Prevents humidity by keeping towels warm and dry. Also functions as a room heater.
• Programmable Timer: Features a timer up to 8 hours for continuous heating or timed towel drying/warming.
• LCD Display: Digitally controlled, allowing temperature monitoring on the LCD screen.
• Low Consumption: Operates at 500W with sensors optimizing timer function for energy savings.
• Customizable: Includes a 3-bar shelf to increase capacity for hanging or stacking towels.

2. Safety Instructions

Please read all safety instructions carefully before installation and use. Retain this manual for future reference.

• Ensure the power supply voltage matches the rating label on the appliance.
• Do not operate the appliance with a damaged cord or plug. If damaged, contact qualified service personnel.
• Keep the appliance away from water. Do not immerse it in water or other liquids.
• Do not use the appliance near bathtubs, showers, or swimming pools.
• Always unplug the appliance before cleaning or maintenance.
• Do not cover the towel dryer while in operation, as this may cause overheating.
• Ensure proper ventilation around the unit.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The surface of the towel dryer can become hot during operation. Avoid direct contact with hot surfaces.
• Install the appliance according to local electrical and building codes.

3. Package Contents

Verify that all components are present and undamaged:

• CREATE Warm Towel 500W Electric Towel Dryer Unit
• 3-Bar Shelf Attachment
• Wall Mounting Hardware (screws, anchors)
• Instruction Manual

4. Product Components

5. Setup and Installation

The CREATE Warm Towel 500W Electric Towel Dryer is designed for wall-mounted installation. Ensure you have appropriate tools and follow these general steps:

1. Choose Location: Select a suitable wall location in your bathroom or dressing area, away from direct water spray and within reach of a power outlet. Consider the dimensions (96.9 cm height, 55 cm width, 5 cm depth) for proper placement.
2. Mark Drilling Points: Use the provided mounting template (if included) or measure and mark the drilling points on the wall for the mounting brackets. Ensure the marks are level.
3. Drill Holes: Drill holes at the marked points using an appropriate drill bit for your wall type. Insert wall anchors if necessary.
4. Attach Brackets: Secure the mounting brackets to the wall using the provided screws.
5. Mount Towel Dryer: Carefully hang the towel dryer unit onto the installed wall brackets. Ensure it is securely seated.
6. Attach Shelf: Install the 3-bar shelf attachment according to the specific instructions provided with the shelf.
7. Connect Power: Plug the appliance into a grounded electrical outlet.

For detailed installation instructions, refer to the separate installation guide or diagrams included with your product packaging.

6. Operating Instructions

Your towel dryer features a digital control panel for easy operation.

1. Power On/Off: Press the power button (often indicated by a universal power symbol or 'ON/OFF') to turn the unit on or off. The LCD screen will illuminate when powered on.
2. Temperature Display: The LCD screen will display the current ambient temperature or the set temperature.
3. Timer Function: To activate the timer, press the timer button (often labeled '1H' or with a clock icon). Each press typically cycles through preset durations (e.g., 1 hour, 2 hours, up to 8 hours). The unit will operate for the selected duration and then automatically turn off.
4. Continuous Operation: To use the unit as a continuous heater, select the appropriate mode or ensure no timer is set. Refer to the specific button functions on your control panel.
5. Towel Placement: Hang towels evenly on the bars or place them on the 3-bar shelf for optimal drying and warming. Do not overload the unit.

7. Maintenance

Regular maintenance ensures the longevity and efficient operation of your towel dryer.

• Cleaning: Before cleaning, always unplug the appliance and allow it to cool completely. Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Dust Removal: Periodically remove any dust accumulation from the unit, especially around the heating elements and control panel, using a soft brush or vacuum cleaner.
• Storage: If storing the appliance for an extended period, ensure it is clean and dry. Store it in a cool, dry place, protected from dust.

8. Troubleshooting

If you encounter issues with your towel dryer, refer to the following common problems and solutions:

9. Specifications

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact the manufacturer or your retailer directly. Keep your proof of purchase for any warranty claims.