SOAIY TDL-6110X-40cm Motion Sensor LED Bar Light User Manual

1. Introduction

Thank you for purchasing the SOAIY Motion Sensor LED Bar Light. This manual provides detailed instructions for the safe and efficient use of your new LED light. Please read this manual thoroughly before installation and operation, and retain it for future reference.

2. Product Overview

Key Features:

• 3 Color Adjustable & Stepless Dimming: Choose from 3200K (bulb color), 4000K (daylight white), and 6500K (daylight). Adjust brightness from 30% to 100%.
• 3 Lighting Modes: ON (constant illumination), AUTO1 (motion and light sensor), AUTO2 (motion sensor only).
• USB Rechargeable: Equipped with a 3000mAh large capacity battery. Provides approximately 4-5 hours of continuous light or up to 1 month in sensor mode (based on 10 activations per day) on a full charge.
• Ultra-Thin Design: 9mm thickness for discreet installation.
• Easy Installation: Features built-in magnets and includes 3M adhesive tape for versatile mounting without wiring.
• Versatile Application: Ideal for closets, hallways, kitchens, bedrooms, stairwells, and other indoor areas.

Package Contents:

• SOAIY Motion Sensor LED Bar Light (Model: TDL-6110X-40cm)
• USB Charging Cable
• 3M Adhesive Tape
• User Manual

3. Safety Information

• This product is designed for indoor use only. Do not expose to rain or moisture.
• Do not disassemble, repair, or modify the product. This may cause electric shock, fire, or damage.
• Keep out of reach of children.
• Do not look directly into the LED light when it is on, as it may cause eye strain.
• Use only the provided USB cable or a certified equivalent for charging.
• Avoid installing near heat sources or in direct sunlight, which can affect battery life and sensor performance.

4. Setup and Installation

The SOAIY LED Bar Light offers two convenient installation methods:

Method 1: Magnetic Attachment

The light has built-in magnets. Simply attach it directly to any metal surface (e.g., refrigerator, metal cabinet).

Method 2: 3M Adhesive Tape

1. Clean the desired installation surface to ensure it is dry and free of dust or grease.
2. Peel off the protective film from one side of the 3M adhesive tape.
3. Attach the tape to the back of the LED light.
4. Peel off the protective film from the other side of the tape.
5. Firmly press the light onto the chosen surface for at least 30 seconds.

Image: Illustration of magnetic and 3M adhesive tape installation methods.

Note: Ensure the installation location is suitable for the motion sensor's detection range (up to 3 meters, 120-degree angle).

5. Operating Instructions

5.1 Charging the Battery

Before first use, fully charge the light. Connect the provided USB charging cable to the light's USB port and to a standard USB power adapter (not included). The indicator light will be red during charging and turn green when fully charged.

Image: USB charging port, charging indicator, and product dimensions (400mm length, 40mm width, 9mm thickness).

5.2 Selecting Lighting Modes

The light features a switch to select between three operating modes:

• ON Mode: The light remains constantly on. Useful as a flashlight or for continuous illumination.
• AUTO1 Mode (Motion + Light Sensor): The light will only activate when motion is detected in a dark environment. It will turn off automatically after approximately 20 seconds if no further motion is detected.
• AUTO2 Mode (Motion Sensor Only): The light will activate when motion is detected, regardless of ambient light conditions (day or night). It will turn off automatically after approximately 20 seconds if no further motion is detected.

Image: Visual representation of the ON, AUTO1, and AUTO2 lighting modes and their activation conditions.

5.3 Adjusting Color Temperature and Brightness

Use the control button to adjust the light's color temperature and brightness:

• Single Press: Turns the light ON/OFF.
• Double Press (Consecutive): Cycles through the three color temperatures: 3200K (warm white), 4000K (neutral white), and 6500K (cool white).
• Long Press: Activates stepless dimming, allowing you to adjust brightness from 30% to 100%. Release the button at your desired brightness level.

Image: Instructions for changing color temperature and adjusting brightness via the control button.

5.4 Motion Sensor Detection Range

The motion sensor detects movement within a range of up to 3 meters (9.8 feet) and a 120-degree angle. The light will turn on when motion is detected and turn off after approximately 20 seconds of no motion.

Image: Visual guide to the motion sensor's effective detection area and behavior.

6. Maintenance

• To clean the light, wipe it gently with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the USB charging port is free from dust and debris to maintain proper charging.
• If the light will not be used for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to preserve battery health.

7. Troubleshooting

8. Specifications

9. Warranty and Support

This product comes with a 12-month warranty from the date of purchase. If you encounter any issues or have questions regarding your SOAIY Motion Sensor LED Bar Light, please contact our customer service for assistance. We are committed to ensuring your satisfaction.

For warranty claims or technical support, please refer to the contact information provided with your purchase or visit the official SOAIY website.