1. Introduction
Thank you for choosing the DYNAMIC SAUNAS Maxxus MX-K206-01 Elite 2-Person Near Zero EMF FAR Infrared Sauna. This manual provides essential information for the proper setup, operation, and maintenance of your sauna. Please read all instructions carefully before use to ensure safety and optimal performance.
Image 1: The DYNAMIC SAUNAS Maxxus MX-K206-01 Elite 2-Person FAR Infrared Sauna in a modern living space. This image showcases the sauna's exterior design and its potential integration into a home environment.
2. Safety Information
Your safety is paramount. Adhere to all warnings and instructions to prevent injury or damage. This sauna is designed with Near Zero EMF (Under 2 MG) technology for enhanced user well-being.
- Indoor Use Only: This sauna is designed exclusively for indoor use. Do not install or operate outdoors.
- Electrical Safety: Ensure the sauna is connected to a dedicated 15 Amp, 120V electrical outlet. Consult a qualified electrician if unsure about your home's electrical capacity.
- Health Considerations: Individuals who are pregnant, elderly, or have pre-existing medical conditions should consult a physician before using the sauna. Discontinue use if you experience discomfort or adverse reactions.
- Temperature Limits: While infrared saunas operate at lower temperatures than traditional saunas, avoid prolonged exposure to high heat. The maximum temperature is approximately 150°F.
- Hydration: Drink plenty of water before, during, and after sauna sessions to prevent dehydration.
- Flammable Materials: Keep all flammable materials away from the sauna. Do not place towels or clothing directly on heating elements.
Image 2: Electrical requirements for the sauna, illustrating a standard 15 Amp, 120V outlet and a corresponding circuit breaker. It emphasizes the need for a dedicated line.
3. Setup and Assembly
The Maxxus MX-K206-01 sauna is designed for straightforward assembly. It consists of several pre-fabricated panels that connect easily. It is recommended to assemble the sauna in its final desired location due to its weight (approximately 325 pounds).
3.1 Unpacking and Inspection
- Carefully unpack all components and inspect for any shipping damage. Report any issues immediately.
- Ensure all parts listed in the packing list are present.
3.2 Assembly Steps
- Base Placement: Position the sauna base on a level, stable surface.
- Wall Panel Connection: Connect the wall panels using the integrated clips or latches. Ensure a secure and flush fit for all panels.
- Roof Installation: Carefully place the roof panel onto the assembled walls, ensuring all electrical connections for lighting and controls are properly aligned and secured.
- Door Installation: Attach the tempered glass door. The door comes pre-hinged and requires minimal installation.
- Interior Components: Install the benches and any other interior accessories.
- Electrical Connection: Plug the sauna into a dedicated 15 Amp, 120V electrical outlet. Avoid using extension cords.
Image 3: A detailed exterior view of the sauna, showcasing the quality of the Canadian Hemlock wood and the panel construction.
4. Operating Instructions
Your Maxxus MX-K206-01 sauna features an intuitive control panel for easy operation.
4.1 Control Panel Overview
The control panel allows you to manage temperature, session duration, and lighting. It typically includes:
- Power Button: To turn the sauna on/off.
- Temperature Display/Controls: Adjust the desired temperature (up to 150°F).
- Timer Display/Controls: Set the duration of your sauna session.
- Light Controls: Manage interior and exterior lighting, including chromotherapy options.
- Audio Controls: For MP3 auxiliary input and speakers.
Image 4: The digital control panel, displaying temperature and timer settings. This panel allows users to easily adjust sauna parameters.
4.2 Starting a Session
- Press the Power button to turn on the sauna.
- Use the Temperature controls to set your desired heat level. Allow 15-20 minutes for the sauna to preheat.
- Set your preferred session duration using the Timer controls.
- Adjust the Chromotherapy Lighting to your preference using the light controls.
- Connect your device to the MP3 auxiliary input for music through the built-in speakers.
- Enter the sauna and enjoy your session.
Image 5: The spacious interior of the sauna, featuring wooden benches and multiple infrared heating panels for comprehensive heat distribution.
5. Maintenance
Regular maintenance ensures the longevity and hygiene of your sauna.
- Cleaning: After each use, wipe down the interior surfaces with a hot, steamy towel. For deeper cleaning, use a mild, non-toxic wood cleaner. Avoid harsh chemicals or abrasive materials.
- Wood Care: The Canadian Hemlock wood is naturally durable. Avoid excessive moisture or direct water contact to prevent warping or damage.
- Ventilation: Ensure proper ventilation around the sauna to prevent moisture buildup.
- Heater Panels: Do not touch the heater panels directly during operation. Keep them free from obstructions.
Image 6: A detailed view of one of the infrared carbon heating panels, which are crucial for the sauna's therapeutic heat.
6. Troubleshooting
If you encounter issues with your sauna, refer to the following common problems and solutions:
- Sauna Does Not Power On:
- Check if the power cord is securely plugged into the dedicated 15 Amp, 120V outlet.
- Verify that the circuit breaker for the outlet has not tripped.
- Ensure all internal wiring connections made during assembly are secure.
- Sauna Not Heating:
- Confirm the temperature setting is above the current internal temperature.
- Allow sufficient preheating time (15-20 minutes).
- Check if any heating panels appear damaged or are not emitting heat.
- Lights Not Working:
- Ensure the light controls on the panel are activated.
- Check the connections for the interior and exterior lights.
If problems persist after attempting these solutions, please contact customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 22 x 75 x 56 inches |
| Item Weight | 325 pounds |
| Manufacturer | Golden Designs Inc (NA) |
| Model Number | MX-K206-01 |
| Capacity | 2-Person |
| EMF Level | Near Zero EMF (Under 2 MG) |
| Heater Type | FAR Infrared Carbon Heating Panels |
| Max Temperature | Up to 150°F |
| Wood Type | Canadian Hemlock |
| Electrical Requirements | 15 Amp / 120V (Dedicated Line Recommended) |
8. Warranty and Support
8.1 Warranty Information
Please refer to the manufacturer's official warranty documentation included with your purchase for detailed information regarding coverage, terms, and conditions. Keep your proof of purchase for warranty claims.
8.2 Customer Support
For any questions, technical assistance, or service requests, please contact DYNAMIC SAUNAS Customer Support. Contact details can typically be found in your product packaging or on the official DYNAMIC SAUNAS website.
