SeeYing Belt-Drive Bluetooth Vinyl Turntable User Manual

1. Product Overview

The SeeYing Belt-Drive Bluetooth Vinyl Turntable offers a blend of classic vinyl playback with modern connectivity. Featuring a belt-drive system, adjustable counterweight, and a high-quality magnetic cartridge, it delivers precise audio reproduction. Its integrated Phono preamplifier allows for direct connection to various audio systems, while Bluetooth output enables wireless streaming to compatible speakers or headphones. Additionally, the USB port facilitates digitizing your vinyl collection to MP3 files.

Figure 1.1: Front view of the SeeYing Turntable with dust cover open and a record on the platter.

2. Package Contents

Please check the box for the following items:

• SeeYing Turntable Unit
• Power Adapter/Charger
• User Manual
• Dust Cover
• Slipmat
• Counterweight
• Anti-skate Weight (pre-installed or separate)

3. Components and Controls

3.1 Turntable Components

Figure 3.1: Close-up views of key turntable components.

• Platter: The aluminum die-cast platter provides stable rotation for records.
• Belt-Drive System: Located beneath the platter, this system ensures smooth and consistent rotation.
• Tonearm: Holds the cartridge and stylus, allowing it to track the record grooves.
• Counterweight: Adjustable weight on the tonearm for proper tracking force.
• Stylus/Cartridge: The Audio-Technica AT3600L diamond-tipped stylus precisely reads the record's grooves. It is detachable for replacement.
• Dust Cover: Protects the turntable from dust when not in use.

3.2 Rear Panel Connections

Figure 3.2: Rear panel connections and their functions.

1. Ground Connector: For connecting a ground wire to an amplifier if needed to reduce hum.
2. Phono/Line-Out Jacks (R/L): RCA outputs for connecting to an amplifier or powered speakers.
3. Phono/Line-Out Switch: Selects between Phono (for amplifiers with a dedicated phono input) and Line (for standard audio inputs, utilizing the turntable's built-in preamplifier).
4. USB-PC Port: Connects the turntable to a computer for digitizing vinyl records.
5. DC In 12V: Power input for the included power adapter.
6. Wireless Output Connectivity (Bluetooth): Activates the Bluetooth transmitter for wireless audio streaming.

3.3 Top Panel Controls

Figure 3.3: Speed and Start/Stop control buttons.

• 33 & 45 Speed Button: Selects the playback speed (33 1/3 RPM or 45 RPM) to match your vinyl record.
• Start & Stop Button: Initiates or halts the platter rotation.

4. Setup

Follow these steps for initial setup of your SeeYing Turntable:

Figure 4.1: Visual guide for turntable assembly.

1. Install the Aluminum Platter: Carefully place the aluminum die-cast platter onto the central polished stainless steel spindle.
2. Install the Drive Belt: Locate the red ribbon attached to the drive belt. Gently pull both ends of the red ribbon to stretch the belt around the motor pulley (small brass cylinder) and then around the inner rim of the platter. Remove the red ribbon once the belt is correctly positioned.
3. Place the Slipmat: Lay the felt slipmat on top of the platter.
4. Adjust the Counterweight: Slide the counterweight onto the rear of the tonearm. Rotate it carefully until the tonearm is balanced and floats horizontally. Then, adjust the tracking force according to your cartridge's specifications (typically 2.5-3.5 grams for the AT3600L stylus). The numbers on the counterweight indicate the tracking force.
5. Install the Dust Cover: Insert the hinges of the dust cover into the slots at the rear of the turntable base.
6. Connect Power: Plug the DC 12V power adapter into the DC In port on the rear of the turntable and then into a wall outlet.

5. Operating Instructions

5.1 Powering On/Off

To power on the turntable, flip the ON/OFF switch located on the rear panel to the 'ON' position. To power off, flip the switch to 'OFF'.

5.2 Playing a Record

1. Place a vinyl record on the platter.
2. Select the correct speed (33 or 45 RPM) using the '33 & 45 Speed Button' on the top panel.
3. Press the 'Start & Stop Button' to begin platter rotation.
4. Gently lift the tonearm using the cueing lever.
5. Position the tonearm over the desired starting groove of the record.
6. Slowly lower the cueing lever to allow the stylus to descend onto the record.
7. To stop playback, lift the tonearm, return it to the tonearm rest, and press the 'Start & Stop Button'.

5.3 Bluetooth Connectivity

The turntable can transmit audio wirelessly to Bluetooth-enabled speakers or headphones.

Figure 5.1: Turntable demonstrating wireless output connectivity.

1. Ensure your Bluetooth speaker or headphones are in pairing mode.
2. Turn on the turntable. The Bluetooth function will automatically attempt to pair with the nearest available Bluetooth audio device.
3. Once connected, audio from the turntable will be streamed to your Bluetooth device.

Note: Some Bluetooth speakers, particularly large soundbars, may not connect properly due to protocol differences. This turntable is compatible with BT protocols HFPV1.5, A2DPV1.2, AVRCPV1.4, HSP1.2, GAVDP1.2, IOP.

5.4 Wired Connection (RCA Output)

Connect the turntable to an external amplifier or powered speakers using RCA cables.

Figure 5.2: Turntable connected to external speakers via RCA.

1. Connect RCA cables (red to red, white to white) from the 'Phono/Line-Out Jacks' on the turntable to the corresponding input on your amplifier or powered speakers.
2. Set the 'Phono/Line-Out Switch' on the turntable's rear panel:
• Select 'PHONO' if your amplifier has a dedicated phono input.
• Select 'LINE' if your amplifier or speakers use a standard auxiliary input (the turntable's built-in preamplifier will be active).
3. If experiencing hum, connect a ground wire from the turntable's 'Ground Connector' to the ground terminal on your amplifier.

5.5 USB Recording

Digitize your vinyl collection by connecting the turntable to your computer via USB.

Figure 5.3: USB connection for vinyl recording.

1. Connect a USB cable from the 'USB-PC Port' on the turntable to an available USB port on your computer.
2. Install appropriate audio recording software on your computer (e.g., Audacity, not included).
3. Follow the software's instructions to select the turntable as the audio input device and begin recording your vinyl audio into MP3 or other digital formats.

6. Maintenance

6.1 Cleaning the Stylus

A clean stylus ensures optimal sound quality and prolongs record life. Use a soft brush designed for stylus cleaning, brushing gently from back to front (away from the cantilever).

6.2 Cleaning the Unit

Wipe the turntable's surface with a soft, dry, lint-free cloth. For stubborn marks, a slightly damp cloth can be used, followed by a dry one. Avoid abrasive cleaners or solvents.

6.3 Dust Cover Care

Clean the dust cover with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials that could scratch the acrylic surface.

6.4 Stylus Replacement

The stylus has a limited lifespan and should be replaced periodically (typically after 300-500 hours of playback). Refer to the stylus manufacturer's instructions for replacement. The AT3600L stylus is detachable for easy replacement.

Figure 6.1: Detachable high-end stylus.

7. Troubleshooting

8. Specifications

9. Warranty and Support

SeeYing is committed to providing high-quality products and excellent customer service. While specific warranty details are not provided in this manual, SeeYing offers dedicated after-sales support for all customers.

For any questions, technical assistance, or support inquiries regarding your SeeYing turntable, please contact the seller or SeeYing customer service directly through the platform where you purchased the product. Please have your model number (HP-H0056) and purchase details ready when contacting support.