1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your oneisall CP-9050 Dog Grooming Clippers. Designed for grooming pets with thick and curly hair, these clippers feature a powerful motor, low-noise operation, and detachable blades for easy maintenance. Please read this manual thoroughly before first use and retain it for future reference.
2. Safety Information
Important: Always use with caution, especially around the face and eyes. Keep away from children. Do not ingest or inhale small parts. Always unplug and allow to cool before cleaning. Store in a dry place away from heat and direct sunlight. Dispose of used blades responsibly.
3. Package Contents
Verify that all items are present in your package:
- oneisall CP-9050 Dog Grooming Clippers
- Charging Cable (USB)
- Cleaning Brush
- Lubricating Oil
- Guide Combs (various lengths)
- User Manual (this document)
4. Key Features
- Heavy Duty Motor: 6500 rpm powerful motor designed for thick, matted fur.
- Low Noise Operation: Produces less than 50 dB of noise, ideal for sensitive pets.
- Sharp Detachable Blades: Facilitates easy cleaning and replacement.
- Long-Lasting Battery: Provides 4 hours of runtime on a 3-hour charge.
- LCD Indication: Displays real-time battery level.
- Adjustable Blade Height: Allows for precise trimming lengths.
- Multiple Guide Combs: 4 length guards for customized grooming.
5. Setup
5.1 Charging the Clippers
- Ensure the clippers are turned off.
- Connect the charging cable to the charging port on the clippers.
- Plug the USB end of the cable into a compatible USB power adapter (not included) or a USB port.
- The LCD screen will display the battery level and charging status. A full charge typically takes 3 hours and provides approximately 4 hours of wireless use.
5.2 Attaching Guide Combs
- Select the desired guide comb length.
- Align the guide comb with the clipper blade and slide it firmly into place until it clicks.
- To remove, gently push the comb upwards and away from the blade.
6. Operating Instructions
6.1 Preparing Your Pet
- Ensure your pet's coat is clean, dry, and free of tangles or mats. Bathe and thoroughly dry your pet before grooming for best results.
- Brush out any loose hair or debris.
6.2 Turning On/Off and Adjusting Blade
- Press the power button to turn the clippers on.
- Adjust the blade length using the dial on the clipper body. Settings typically range from 0.8mm to 2.0mm.
- To turn off, press the power button again.
6.3 Grooming Technique
- Always use the clippers in the direction of hair growth.
- Hold the skin taut to ensure an even cut and prevent nicks.
- For thick or matted areas, consider using a longer guide comb first, then gradually reducing the length.
- Take frequent breaks to check the blade temperature and ensure your pet remains comfortable.
Video 1: Official demonstration of oneisall Dog Clippers effectively grooming thick coats, highlighting their smooth operation and efficiency.
7. Maintenance
7.1 Cleaning the Blades
- Ensure the clippers are turned off and unplugged.
- Detach the blade assembly by pushing it forward until it separates from the clipper body.
- Use the provided cleaning brush to remove any trapped hair from the blades and inside the clipper head.
- The detachable blades can be rinsed under running water for thorough cleaning. Ensure they are completely dry before reattaching.
- Reattach the blade assembly by aligning it and pushing it back until it clicks into place.
7.2 Oiling the Blades
- After each cleaning, apply a few drops of the provided lubricating oil to the blades.
- Turn the clippers on for a few seconds to distribute the oil evenly. This helps maintain blade sharpness and reduces friction.
7.3 Storage
- Store the clippers and all accessories in a clean, dry place, away from direct sunlight and extreme temperatures.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clippers not turning on. | Low battery or no charge. | Charge the clippers fully (approx. 3 hours). Check the LCD display for battery level. |
| Clippers not cutting effectively or pulling hair. | Blades are dull, dirty, or not oiled. Pet's hair is matted or tangled. | Clean and oil the blades. Ensure pet's hair is clean, dry, and brushed. Consider replacing blades if dull. |
| Excessive noise or vibration. | Blades are not properly aligned or need oiling. | Ensure blades are correctly reattached and oiled. |
| Clippers get hot during use. | Prolonged use or lack of lubrication. | Take breaks during grooming. Clean and oil blades regularly. |
9. Specifications
- Model Number: CP-9050
- Brand: oneisall
- Power Source: Battery Powered
- Battery Capacity: 2200 mAh
- Battery Runtime: Approximately 4 hours
- Charging Time: Approximately 3 hours
- Motor Speed: 6500 rpm
- Noise Level: Less than 50 dB
- Item Weight: 0.49 Kilograms (1.08 Pounds)
- Package Dimensions: 8.54 x 7.76 x 2.72 inches
- Recommended Uses: Body grooming for pets
10. Warranty and Support
For warranty information or product support, please refer to the contact details provided with your purchase or visit the official oneisall website. Keep your purchase receipt as proof of purchase.
11. Legal Disclaimer
Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.
