1. Introduction
This manual provides essential information for the safe and efficient use of your Linkind Matter Smart Light Bulb. Please read it thoroughly before installation and operation. This smart bulb offers multi-color and tunable white lighting, voice control, app control, DIY modes, timers, music sync, and group control. It is designed for seamless integration into various smart home ecosystems.
2. Safety Information
- Do not use with traditional dimmer switches. This may cause flickering or buzzing.
- Ensure the power is off before installing or removing the bulb.
- For indoor use only.
- Only supports 2.4GHz Wi-Fi networks.
- Keep out of reach of children.
- Avoid exposing the bulb to direct water or excessive moisture.
3. Package Contents
- 2 x Linkind Smart Light Bulbs (A19 E26)
- 1 x Instruction Manual
4. Product Overview
The Linkind Matter Smart Light Bulb is a versatile LED bulb designed for modern smart homes. It features multi-color (RGTBW) and tunable white (1800K-6500K) capabilities, providing 800 lumens of brightness at 9 watts, equivalent to a 60W incandescent bulb. It boasts a high Color Rendering Index (CRI) of 90.00 for accurate color reproduction and a low blue-ray hazard design for eye comfort. The bulb connects via 2.4GHz Wi-Fi and is compatible with Matter-certified platforms like Apple Home, Alexa, Google Home, and SmartThings, as well as the AiDot app.
5. Setup
5.1 Pre-requisites
- A stable 2.4 GHz Wi-Fi network (5 GHz is not supported).
- A Matter-certified hub/controller (e.g., HomePod, Echo, Nest, SmartThings Hub) is required to control the bulb with Apple Home, Alexa, Google Home, or SmartThings platforms.
- Alternatively, the AiDot app can control the bulb directly without a separate hub.
- Ensure your mobile phone's Bluetooth is enabled during network configuration.
- Complete network configuration within 15 minutes after powering on the device. If not completed, reboot the device and try again.
5.2 Installation
- Screw the Linkind Smart Light Bulb into a standard E26 light socket.
- Turn on the power to the light fixture. The bulb should light up.
5.3 Pairing with a Smart Home Platform (Matter-enabled)
To pair your Linkind Smart Light Bulb with a Matter-compatible platform (Apple Home, Alexa, Google Home, SmartThings), follow these general steps:
- Launch the App: Open your preferred smart home app (Apple Home, Alexa, Google Home, or SmartThings).
- Enable Bluetooth & Wi-Fi: Ensure your mobile device has Bluetooth enabled and is connected to a 2.4GHz Wi-Fi network.
- Add Device: Look for an 'Add Device' or '+' icon within the app.
- Scan Matter Code: The app will prompt you to scan the Matter QR code located on the bulb itself or its packaging.
- Follow On-Screen Instructions: Complete the pairing process by following any additional prompts in the app, such as assigning the bulb to a room or giving it a name.
6. Operating Instructions
6.1 Basic Control (App & Voice)
Once paired, you can control your smart bulb using the AiDot app or your connected smart home platform's app (Apple Home, Alexa, Google Home, SmartThings) and voice commands.
- On/Off: Toggle the light on or off.
- Brightness: Adjust the light intensity from 1% to 100%.
- Color Change: Select from millions of colors or choose tunable white light (1800K-6500K).
6.2 Advanced Features
- Music Sync: The bulb can change colors and brightness in rhythm with music detected by your phone's microphone.
- Wake-Up Mode: Set schedules for the light bulb to gradually change colors over 24 hours, simulating natural sunlight from dusk to dawn.
- Group Control: Easily group multiple Linkind smart bulbs to control them simultaneously with a single command.
- DIY Color & Scene: Create custom color combinations and dynamic lighting scenes for various moods and occasions (e.g., reading, party, relaxing).
7. Maintenance
- Clean the bulb with a soft, dry cloth. Do not use liquid cleaners.
- Store the bulb in a cool, dry place when not in use for extended periods.
8. Troubleshooting
- Bulb not connecting: Ensure your Wi-Fi is 2.4GHz. Check if Bluetooth is enabled on your phone. Reboot the bulb and try pairing again within 15 minutes of power-on.
- Flickering or buzzing: Do not use the smart bulb with traditional dimmer switches. Ensure the bulb is securely screwed into the socket.
- Loss of control: Check your Wi-Fi connection. Ensure the AiDot app and your Matter-compatible hub are updated to the latest versions.
- Color or brightness issues: Reset the bulb by turning it off and on five times consecutively. This will put it into pairing mode.
- For further assistance, refer to the 'Feedback' section within the AiDot app.
9. Specifications
| Brand | Linkind |
| Model Number | LS0101811266 |
| Light Type | LED |
| Special Feature | Color Changing, Dimmable, Eye-Friendly, Music Sync, Seamless Interoperability |
| Wattage | 9 watts |
| Bulb Shape Size | A19 |
| Bulb Base | E26 |
| Incandescent Equivalent | 60 Watts |
| Light Color | Millions of colors, from warm white to cool white (1800K-6500K) |
| Brightness | 800 Lumen |
| Color Temperature | 6500 Kelvin (max white) |
| Color Rendering Index (CRI) | 90.00 |
| Average Life | 25,000 Hours (approx. 22 years at 3 hours/day) |
| Control Method | App, Voice |
| Connectivity | 2.4GHz Wi-Fi, Matter |
| Product Dimensions | 2.3"W x 4.2"H |
| Item Weight | 3.84 ounces |
10. Warranty and Support
Linkind provides a 2-year warranty for this product. For technical support or customer service inquiries, please contact Linkind customer service. Live customer service is available Monday-Friday, 9 AM - 5 PM PST.
You can also find support and provide feedback directly through the AiDot app.
