DAUZ Sazaobd6hcwkius-11

DAUZ Front Bumper Side Trim (Model Sazaobd6hcwkius-11) Instruction Manual

For 2014-2017 Models

Introduction

This instruction manual provides detailed guidance for the installation and maintenance of the DAUZ Front Bumper Side Trim, model Sazaobd6hcwkius-11. This product is designed as a direct replacement part for the front bumper of 2014-2017 models, serving as an exterior decoration and grille filler. It is manufactured from durable ABS material to ensure longevity and a precise fit.

Setup and Installation

The DAUZ Front Bumper Side Trim is engineered for a straightforward installation process, requiring no specialized tools or modifications to your vehicle. It is a direct replacement for the original part.

Installation Steps:

  1. Preparation: Ensure the vehicle is parked on a level surface and the engine is off. For safety, consider wearing gloves.
  2. Locate Existing Trim: Identify the front bumper side trim on your vehicle that needs replacement. This product is designed for the left side (OEM part 57731SG130).
  3. Remove Old Trim: Carefully inspect how the existing trim is attached. Most bumper trims are held in place by clips or tabs. Gently disengage these clips or tabs to remove the old trim. Avoid excessive force to prevent damage to surrounding bumper components.
  4. Clean Area: Once the old trim is removed, clean the mounting area on the bumper to ensure it is free of dirt, debris, or old adhesive residue.
  5. Install New Trim: Align the new DAUZ Front Bumper Side Trim with the mounting points on your vehicle's front bumper. Press firmly until the trim snaps securely into place. Ensure all clips or tabs are fully engaged. The design ensures a perfect fit without scratching the vehicle's paint or damaging original equipment.
  6. Verify Installation: After installation, gently tug on the new trim to confirm it is securely fastened and does not wobble.
DAUZ Front Bumper Side Trim installed on a white vehicle

Image 1: The DAUZ Front Bumper Side Trim shown installed on the front bumper of a white vehicle, demonstrating its intended fitment.

Front view of the DAUZ Front Bumper Side Trim

Image 2: A direct front view of the DAUZ Front Bumper Side Trim, highlighting its grille pattern and overall shape.

Operating Instructions

The DAUZ Front Bumper Side Trim is a passive exterior component and does not require active operation. Once correctly installed, it functions as an aesthetic enhancement and a protective grille filler for the vehicle's front bumper.

Maintenance

To ensure the longevity and appearance of your DAUZ Front Bumper Side Trim, follow these simple maintenance guidelines:

  • Regular Cleaning: Clean the trim regularly with mild automotive soap and water, using a soft cloth or sponge. Rinse thoroughly to remove all soap residue.
  • Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the ABS material and finish.
  • Inspection: Periodically inspect the trim for any signs of damage, looseness, or wear. Address any issues promptly to prevent further damage.

Troubleshooting

If you encounter any issues with your DAUZ Front Bumper Side Trim, refer to the following common scenarios:

  • Trim Does Not Fit Correctly:
    • Double-check the product's fitment information to ensure it is compatible with your vehicle's make, model, and year (2014-2017).
    • Verify that the old trim was completely removed and the mounting area is clear of obstructions.
    • Ensure the new trim is oriented correctly and all clips are aligned before applying pressure.
  • Trim Becomes Loose After Installation:
    • Re-examine the installation points to confirm all clips or tabs are fully engaged and secured.
    • Inspect the trim and bumper mounting points for any damage that might prevent a secure fit.
  • Damage to Trim:
    • If the trim is physically damaged (cracked, broken), it may need to be replaced.

For further assistance, please contact customer support.

Specifications

Item TypeFront Bumper Side Trim
MaterialABS
ColorBlack
Installation LocationFront Bumper
FitmentReplacement for 2014-2017
OEM Part Number (Left)57731SG130
Model NumberSazaobd6hcwkius-11
Item Weight1.41 ounces
Package Dimensions9.96 x 4.02 x 0.67 inches
BrandDAUZ
ManufacturerSazao

Customer Support

For any questions, concerns, or assistance regarding the DAUZ Front Bumper Side Trim, please contact your retailer or the manufacturer's customer service department. When contacting support, please provide the product model number (Sazaobd6hcwkius-11) and your purchase details.

© 2023 DAUZ. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.