1. Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your BUNOEM L-Shaped 59-inch Height Adjustable Electric Standing Desk. This desk is designed to offer a versatile and ergonomic workspace, allowing seamless transitions between sitting and standing positions. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance.
Figure 1: BUNOEM L-Shaped 59" Height Adjustable Electric Standing Desk.
2. Safety Information
Please follow these safety guidelines: 1. Ensure the desk is assembled following the detailed instructions and using the provided tools. 2. Do not exceed the maximum weight limit of 176 pounds. 3. Use the collision-avoidance feature to prevent stability issues. 4. Always keep hands and fingers clear from moving parts during operation. 5. If any error code appears, reset the desk using the provided instructions. 6. Regularly inspect the desk for any signs of wear or damage and address them promptly.
3. Package Contents
Before beginning assembly, please verify that all components listed below are present and undamaged. Refer to the parts list provided in the packaging for specific quantities.
Figure 2: All components included in the package.
- L-Shaped Desktop (multiple sections)
- Height-Adjustable Leg Frames
- Electric Motor and Control Box
- Control Panel with Memory Presets
- Desktop Cable Grommets (2)
- Under-Desk Cable Basket
- Desk Hooks
- Assembly Tools and Hardware (screws, wrench, etc.)
- Power Adapter and Cables
4. Setup and Assembly
Assembly requires careful attention to detail. All necessary tools are included. It is recommended to have two people for certain steps, especially when handling the desktop sections.
4.1 Assembly Video Guide
For a visual guide on assembling your BUNOEM L-shaped standing desk, please watch the official installation video below:
Video 1: Official BUNOEM L-shaped Standing Desk Installation Guide. This video demonstrates the step-by-step assembly process, from connecting desktop sections to installing the motor and control panel.
4.2 Key Assembly Steps
- Assemble Desktop Sections: Connect the desktop pieces using the provided hinges and screws. Ensure they are aligned correctly.
- Attach Leg Frames: Secure the leg frames to the underside of the desktop.
- Install Motor and Drive Rod: Connect the electric motor and the drive rod between the leg frames.
- Mount Control Panel: Attach the control panel to the designated area on the desk edge.
- Cable Management: Route all power and control cables neatly using the included cable basket and ties.
- Install Accessories: Attach desktop cable grommets, desk hooks, and optional swivel casters as desired.
5. Operating Instructions
5.1 Control Panel Overview
The desk features an LED control panel with intuitive buttons for height adjustment and memory presets.
Figure 3: Control Panel with LED display and memory buttons.
- Up/Down Arrows: Press to manually adjust the desk height.
- LED Screen: Displays the current desk height in inches.
- Memory Buttons (1, 2, 3, 4): Store and recall preferred height settings.
5.2 Height Adjustment
The desk's height can be adjusted electrically from 27 inches to 45 inches.
- Manual Adjustment: Press and hold the Up or Down arrow buttons until the desired height is reached. Release the button to stop.
- Memory Presets: To move to a saved height, simply press the corresponding memory button (1, 2, 3, or 4). The desk will automatically adjust to that height.
5.3 Setting Memory Presets
To program a specific height into a memory button:
- Adjust the desk to your desired height using the Up/Down arrows.
- Press and hold one of the memory buttons (1, 2, 3, or 4) for more than five seconds until the LED screen flashes or beeps, indicating the height has been saved.
5.4 Anti-Collision Technology
The desk is equipped with anti-collision technology to prevent damage. If an obstacle is detected during height adjustment, the desk will automatically stop and reverse slightly (drops 2cm/0.78in) to avoid collision.
6. Maintenance
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Cable Management: Periodically check and re-secure cables to prevent tangling or damage.
- Inspection: Regularly inspect all screws and connections to ensure they are tight.
7. Troubleshooting
If you encounter any issues with your desk, refer to the following common solutions:
- Error Codes: If an error code appears on the LED screen, try resetting the desk.
- Reset Procedure: To reset the desk, press and hold the Up and Down arrow buttons simultaneously for more than five seconds.
- Desk Not Moving: Ensure all power cables are securely connected and the power outlet is functioning. If the desk has been reset, try adjusting the height again.
8. Specifications
| Feature | Specification |
|---|---|
| Brand | BUNOEM |
| Model Number | BN-01 |
| Product Dimensions (D x W x H) | 40"D x 59"W x 46"H |
| Minimum Height | 27 Inches |
| Maximum Height | 45 Inches |
| Maximum Weight Recommendation | 176 Pounds |
| Top Material Type | Engineered Wood |
| Base Material | Metal |
| Lifting Mechanism | Electric motor with position detection technology |
| Special Feature | Adjustable Height, Anti-Collision Technology, Memory Presets |
| Included Components | 2 wire collection holes, under-desk cable basket, desk hooks |
| Required Assembly | Yes |
| Recommended Number of People for Assembly | 1 (2 recommended for desktop handling) |
9. Warranty and Support
BUNOEM provides a two-year limited warranty for this product. For any questions or support needs regarding your BUNOEM standing desk, please contact our customer service. We aim to respond to all inquiries within 24 hours to ensure a satisfying shopping experience.
For further assistance, please refer to the contact information provided with your purchase or visit the official BUNOEM store on Amazon.