1. Introduction
Thank you for choosing the Ibergrif M12059-1 Single-Lever Wall-Mounted Shower Mixer Tap. This manual provides essential information for the safe installation, correct operation, and proper maintenance of your new shower mixer. Please read these instructions carefully before installation and retain them for future reference.
2. Safety Information
- Always turn off the main water supply before beginning any installation or maintenance work.
- Ensure all connections are secure and watertight to prevent leaks.
- If you are unsure about any part of the installation process, consult a qualified plumber.
- Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this may damage the surface.
- Protect the product from freezing temperatures, which can cause damage.
3. Components Included
The Ibergrif M12059-1 shower mixer package typically includes the following items:
- Single-lever shower mixer tap
- Wall escutcheons (decorative covers)
- S-connections (eccentric connectors)
- Washers and seals
- Installation instruction manual
Contents of the Ibergrif M12059-1 shower mixer package, including the mixer tap, wall escutcheons, S-connections, washers, and instruction manual.
4. Setup and Installation
This shower mixer is designed for wall-mounted installation with standard G1/2 inch threaded connections. Ensure your existing plumbing is compatible before proceeding.
4.1 Pre-Installation Checks
- Verify that all components listed in Section 3 are present and undamaged.
- Confirm that the hot and cold water supply lines are correctly positioned and spaced for a wall-mounted mixer.
- Flush the water lines to remove any debris before connecting the mixer.
4.2 Installation Steps
- Turn off Water Supply: Locate and turn off the main water supply to your bathroom.
- Prepare Wall Connections: If replacing an old mixer, remove it. Clean the wall area around the water outlets.
- Install S-Connections: Screw the S-connections into the wall water outlets. Adjust them until the distance between their centers matches the mixer's inlets (typically 150mm, as shown in the diagram). Ensure they are level and protrude equally from the wall.
- Attach Wall Escutcheons: Place the decorative wall escutcheons over the S-connections.
- Connect Mixer: Place the rubber washers into the nuts of the mixer tap. Carefully align the mixer with the S-connections and hand-tighten the nuts.
- Secure Mixer: Using an appropriate wrench, tighten the nuts firmly but do not overtighten. Ensure the mixer is level and securely mounted to the wall.
- Test for Leaks: Slowly turn on the main water supply. Check all connections for any signs of leakage. If leaks occur, tighten the connections slightly until they stop.
Detailed dimensions of the Ibergrif M12059-1 shower mixer, showing overall length (235mm), height (110mm), and G1/2 thread specifications (20.96mm) with a 150mm center-to-center distance for wall mounting.
Front view of the Ibergrif M12059-1 single-lever wall-mounted shower mixer tap installed, showcasing its chrome finish and modern design.
5. Operating Instructions
The Ibergrif M12059-1 features a single lever for convenient control of water flow and temperature.
5.1 Water Flow Control
- To turn the water on, lift the lever upwards.
- To increase the water flow, lift the lever further.
- To decrease the water flow, lower the lever.
- To turn the water off, push the lever fully downwards.
5.2 Temperature Control
- To adjust the water temperature, move the lever horizontally.
- Moving the lever to the left typically increases the hot water proportion.
- Moving the lever to the right typically increases the cold water proportion.
- The integrated ceramic disc cartridge ensures precise temperature and flow adjustment, while also contributing to water savings and low noise operation.
Diagram illustrating the water-saving and low-noise features of the Ibergrif M12059-1 shower mixer, along with an image of the ceramic disc cartridge.
5.3 Shower Head Holder
The mixer includes a convenient holder for your shower head, compatible with standard G1/2 shower hoses.
Image showing the G1/2 connection point and the integrated shower head holder on the Ibergrif M12059-1 shower mixer.
6. Maintenance and Cleaning
Proper care will ensure the longevity and aesthetic appeal of your Ibergrif shower mixer.
6.1 Cleaning the Chrome Finish
- Clean the mixer regularly with a soft cloth and mild soap or a non-abrasive liquid cleaner specifically designed for chrome finishes.
- Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
- Avoid using abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the high-gloss chrome surface.
Close-up view of the Ibergrif M12059-1 shower mixer highlighting the 3-stage electroplating process for the chrome finish and the heavy brass construction, ensuring durability and easy maintenance.
6.2 Ceramic Cartridge
The mixer is equipped with a durable ceramic disc cartridge designed for long-term, leak-free performance. In most cases, this component requires no regular maintenance. If you experience persistent dripping or difficulty in adjusting temperature/flow, the cartridge may need inspection or replacement by a qualified professional.
7. Troubleshooting
Before contacting customer service, please refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Water dripping from spout | Worn ceramic cartridge or debris in cartridge. | Replace the ceramic cartridge. Ensure water lines are flushed before installation. |
| Low water flow | Partially closed stopcock, clogged aerator (if applicable), or debris in water lines. | Check main water supply. Clean or replace aerator. Flush water lines. |
| Water temperature inconsistent | Uneven water pressure, faulty ceramic cartridge, or issues with water heater. | Check water pressure balance. Inspect or replace ceramic cartridge. Consult a plumber for water heater issues. |
| Leakage at connections | Loose connections or damaged washers. | Tighten connections. Replace worn or damaged washers. |
8. Specifications
- Model Number: M12059-1
- Brand: Ibergrif
- Material: Brass
- Finish: Chrome
- Installation Type: Wall-mounted, Single-hole
- Number of Handles: 1 (Single-lever)
- Valve Type: Ceramic Disc Valve
- Thread Size: G1/2 inch universal thread
- Dimensions (L x W x H): Approximately 25 x 11.5 x 6.5 cm
- Item Weight: 1 Kilogram
- Special Feature: Water-saving system
- Components Included: Installation hardware
9. Warranty Information
Ibergrif products are manufactured to high-quality standards and are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your purchase or visit the official Ibergrif website for detailed warranty terms and conditions specific to your region.
10. Customer Support
If you encounter any issues not covered in this manual or require further assistance, please contact your retailer or the Ibergrif customer support team. When contacting support, please have your product model number (M12059-1) and purchase details readily available.