Pleasant Hearth GV-7000HE

Pleasant Hearth Gavin GV-7000HE Fireplace Glass Door User Manual

Model: GV-7000HE (Small Heritage Brass)

1. Introduction

This manual provides instructions for the safe installation, operation, and maintenance of your Pleasant Hearth Gavin GV-7000HE Fireplace Glass Door. This product is designed to enhance the aesthetic and energy efficiency of traditional masonry fireplaces. Please read all instructions carefully before installation and use.

Pleasant Hearth Gavin Fireplace Glass Door, front view, closed

Figure 1: Front view of the Pleasant Hearth Gavin Fireplace Glass Door (Small Heritage Brass) in a closed position, showcasing the mesh screens and glass panels.

2. Important Safety Information

  • This fireplace glass door set is designed for masonry fireplaces only. It is not suitable for prefabricated fireplaces or metal fireboxes.
  • Always keep glass doors open and mesh panels closed when a fire is burning in the fireplace.
  • Never leave a burning fire unattended.
  • Ensure proper ventilation when operating your fireplace.
  • Keep children and pets away from the fireplace, especially when in use.
  • Allow the fireplace and glass doors to cool completely before cleaning or performing maintenance.

3. Setup and Installation

The Pleasant Hearth Gavin Fireplace Glass Door is designed for straightforward surface-mounted installation. Ensure your fireplace opening dimensions are compatible with the product specifications before beginning.

3.1 Sizing and Compatibility

Verify your fireplace opening measurements. This model is designed for specific width and height ranges. Refer to the sizing guide image below to confirm compatibility.

Fireplace opening dimensions for installation

Figure 2: Diagram illustrating the required fireplace opening dimensions for proper installation. The image shows a fireplace opening that fits widths between 30-37 inches and heights between 22.5-29.5 inches.

3.2 Installation Steps

While specific detailed steps are provided in the packaging, the general installation involves:

  1. Unpack all components and verify against the parts list.
  2. Position the fireplace glass door frame against the fireplace opening.
  3. Secure the frame using the provided hardware, ensuring it is level and flush against the masonry.
  4. Adjust as necessary for a proper fit.

The unit is a one-piece solid frame with welded construction, simplifying the installation process.

4. Operating Instructions

4.1 Using the Glass Doors and Mesh Screens

  • When a fire is burning: Always keep the glass doors fully open. The bifold glass doors fold compactly against the fireplace wall. Ensure the rigid mesh firescreen panels are closed to prevent sparks, embers, and debris from escaping the hearth.
  • When no fire is present: Keep both the glass doors and mesh panels closed. The easy-catch magnets will secure them. This helps reduce heat and air conditioning loss through the chimney by up to 90%, improving energy efficiency. Closed doors also prevent cold downdrafts and keep soot contained.
Fireplace glass doors open with mesh screens closed

Figure 3: The fireplace glass doors are shown in the open position, revealing the closed mesh screens behind them, ready for fire operation.

4.2 Airflow Control

A hidden damper knob is integrated into the design to allow for control of airflow into the fireplace. Adjust this knob as needed to regulate the burn rate of your fire.

Close-up of brass handle and mesh screen

Figure 4: A close-up view of the heritage brass handle and the mesh screen, highlighting the door mechanism and finish.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your fireplace glass door.

5.1 Cleaning the Glass

  • Allow glass to cool completely before cleaning.
  • Use a non-abrasive glass cleaner specifically designed for fireplace glass. Avoid ammonia-based cleaners.
  • Apply cleaner to a soft cloth, then wipe the glass. Do not spray cleaner directly onto the glass as it may drip onto the frame and cause discoloration.
  • Wipe dry with a clean, lint-free cloth.

5.2 Frame and Mesh Cleaning

  • Wipe the powder-coated steel frame with a soft, damp cloth to remove dust and soot.
  • For stubborn marks, use a mild soap solution and dry thoroughly.
  • Periodically inspect the mesh screens for any damage or wear.

6. Troubleshooting

This section addresses common issues you might encounter.

  • Doors not closing properly: Check for any obstructions in the hinge mechanism or along the frame. Ensure the frame is level and securely mounted. The magnetic catches should align.
  • Excessive smoke: Verify that the damper knob is open and that the chimney is clear of obstructions. Ensure glass doors are fully open when a fire is burning.
  • Glass discoloration: This can occur over time with heavy use. Regular cleaning with appropriate fireplace glass cleaner can minimize this. Ensure proper airflow to promote a cleaner burn.

7. Specifications

FeatureDetail
BrandPleasant Hearth
Model NumberGV-7000HE
MaterialAlloy Steel, Brass, Glass, Metal
ColorBrass
Product Dimensions38.75"L x 28"W
Finish TypePowder Coated
Item Weight56.9 pounds
UPC872076048985
CompatibilityMasonry Fireplaces Only

8. Warranty Information

Specific warranty details for the Pleasant Hearth Gavin GV-7000HE Fireplace Glass Door are typically included with the product packaging. Please refer to the documentation provided at the time of purchase for comprehensive warranty terms and conditions. For warranty claims or inquiries, retain your proof of purchase.

9. Customer Support

For technical assistance, replacement parts, or further information regarding your Pleasant Hearth product, please refer to the contact information provided in your product packaging or visit the official Pleasant Hearth website. When contacting support, please have your model number (GV-7000HE) and proof of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.