1. Introduction
Thank you for choosing the RAYMOND WEIL TANGO GMT BOBMARLEY 8280-ST1-BMY18 Men's Watch. This timepiece combines precision quartz movement with a distinctive design, celebrating a collaboration with Bob Marley. This manual provides essential information for the proper setup, operation, and maintenance of your watch to ensure its longevity and accurate performance.
2. Product Overview
The RAYMOND WEIL TANGO GMT BOBMARLEY 8280-ST1-BMY18 is a limited edition quartz watch featuring a GMT function, allowing you to track a second time zone. It is crafted with a stainless steel case and bracelet, and protected by a scratch-resistant sapphire crystal. The watch is water-resistant to 30 ATM.
Figure 2.1: Front view of the RAYMOND WEIL TANGO GMT BOBMARLEY 8280-ST1-BMY18 Men's Watch, showcasing the dial, hands, and stainless steel bracelet.
Key Components:
- Crown: Used for setting time, date, and GMT hand.
- Dial: Displays local time, GMT time, and date.
- Hands: Hour, minute, second, and GMT hands.
- Bezel: Fixed or rotating, often with a 24-hour scale for GMT function.
- Bracelet: Stainless steel band for secure wearing.
- Sapphire Crystal: Highly scratch-resistant watch face cover.
3. Setup
3.1 Setting the Time and Date
- Pull the crown out to position 2 (first click). This position is typically for setting the date or GMT hand.
- Rotate the crown to adjust the date or GMT hand. Refer to the specific movement instructions for your watch, as crown functions can vary.
- Pull the crown out to position 3 (second click). The second hand will stop.
- Rotate the crown to set the local hour and minute hands. Ensure the AM/PM is correctly set if your watch has a 24-hour indicator or date change mechanism.
- Push the crown back to position 1 (normal operating position) to start the watch.
3.2 Setting the GMT (Second Time Zone)
The GMT hand typically operates on a 24-hour scale.
- Pull the crown out to position 2.
- Rotate the crown in the appropriate direction to move the GMT hand to the desired second time zone. The GMT hand usually makes one full rotation in 24 hours.
- Once the GMT hand is set, push the crown back to position 1.
Note: Specific crown functions may vary slightly. If you encounter difficulty, consult a qualified watchmaker or RAYMOND WEIL customer support.
4. Operating Instructions
4.1 Timekeeping
Once the time and date are set, your quartz watch will operate continuously. The second hand will move in distinct steps.
4.2 Reading GMT Time
The GMT hand, often distinguished by color or shape, points to a 24-hour scale on the dial or bezel, indicating the time in your chosen second time zone. For example, if the GMT hand points to '18' on the 24-hour scale, the time in the second zone is 6 PM.
5. Maintenance
5.1 Cleaning
To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For stainless steel, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.
5.2 Water Resistance (30 ATM)
Your watch is water-resistant to 30 ATM (300 meters / 1000 feet). This rating makes it suitable for professional marine activity, serious surface water sports, and skin diving.
- Always ensure the crown is fully pushed in before any contact with water.
- Do not operate the crown or pushers while the watch is wet or submerged.
- After exposure to saltwater, rinse the watch with fresh water and dry it thoroughly.
- Water resistance is not a permanent characteristic and may decrease over time due to aging of gaskets or accidental shocks. It is recommended to have the water resistance checked annually by an authorized service center.
5.3 Battery Replacement
As a quartz watch, it is powered by a battery. The typical battery life is 2-3 years. When the battery is low, the second hand may start to jump in 2 or 4-second intervals (End-of-Life indicator). It is recommended to have the battery replaced by an authorized RAYMOND WEIL service center to ensure proper sealing and function.
5.4 Storage
When not wearing your watch, store it in a cool, dry place, away from direct sunlight, extreme temperatures, and strong magnetic fields.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch not running | Depleted battery | Replace battery at an authorized service center. |
| Incorrect time/date | Crown not fully pushed in; incorrect setting | Ensure crown is in position 1. Re-set time/date as per Section 3.1. |
| Condensation under crystal | Loss of water resistance; extreme temperature change | Immediately take to an authorized service center for inspection and repair. |
| GMT hand not synchronized | Incorrect GMT setting | Re-set GMT hand as per Section 3.2. |
For issues not listed here or if solutions do not resolve the problem, please contact an authorized RAYMOND WEIL service center.
7. Specifications
| Model Number | 8280-ST1-BMY18 |
| Brand | RAYMOND WEIL |
| Movement Type | Quartz |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Crystal | Sapphire Crystal |
| Case Diameter | 42 Millimetres |
| Case Thickness | 11 Millimetres |
| Band Width | 20 Millimetres |
| Water Resistance Depth | 30 Metres (30 ATM) |
| Dial Color | Black |
| Band Color | Black |
| Clasp Type | Push Button Hidden Clasp |
| Item Weight | 100 Grams |
| First Available | 11 October 2022 |
8. Warranty and Support
8.1 Warranty Information
RAYMOND WEIL watches are covered by a limited international warranty against manufacturing defects. The duration and terms of the warranty may vary by region and product. Please refer to the warranty card provided with your watch at the time of purchase for specific details. Keep your proof of purchase and warranty card in a safe place.
8.2 Customer Support
For service, repairs, or any inquiries regarding your RAYMOND WEIL watch, please contact an authorized RAYMOND WEIL retailer or service center. You can find a list of authorized locations on the official RAYMOND WEIL website.
Official Website: www.raymond-weil.com
