1. Introduction
Thank you for choosing the Sorbus 10-Drawer Dresser. This chest organizer unit is designed to provide versatile storage for your home, featuring a sturdy steel frame, a faux wood top, and easy-pull fabric bins. This manual provides essential information for safe assembly, operation, and maintenance of your new dresser.
Image 1: The Sorbus 10-Drawer Dresser, showcasing its gray wood finish and ten fabric drawers.
2. Important Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Weight Capacity: The dresser supports up to 65 lbs (29.5 kg) on the top surface. Do not exceed this weight limit.
- Drawer Weight: Avoid overloading individual drawers to ensure smooth operation and prevent damage.
- Stability: For optimal stability, place the dresser on a flat, level surface. If possible, secure the dresser to a wall using anti-tip hardware (if included) to prevent accidental tipping, especially in households with children or pets.
- Assembly: Assemble the unit according to the instructions provided. Do not modify the product.
- Children: Do not allow children to climb on or play with the dresser.
3. Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Sorbus customer support.
- Steel Frame Components
- MDF Wood Top
- Fabric Drawers (10 units)
- Handles for Drawers
- Assembly Hardware (screws, bolts, etc.)
- Instruction Manual
4. Assembly Instructions
Assembly of this dresser is designed to be straightforward and typically requires no additional tools. Follow these steps carefully:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Assemble the Steel Frame: Connect the steel frame components according to the diagrams in the included hardware instructions. Ensure all connections are secure.
- Attach the Wood Top: Place the MDF wood top onto the assembled steel frame and secure it using the provided hardware.
- Prepare Fabric Drawers: Unfold each fabric drawer. Insert the bottom panel into each drawer to create a rigid base.
- Attach Handles: Secure the handles to the front of each fabric drawer using the provided screws.
- Insert Drawers: Slide the assembled fabric drawers into their designated slots within the steel frame.
Image 2: Key features highlighting the water-resistant fabric, ease of cleaning, simple assembly, and durable design of the dresser.
5. Operating Instructions
The Sorbus 10-Drawer Dresser is designed for easy use and organization.
- Drawer Use: Gently pull and push the fabric drawers using the attached handles. Avoid forcing drawers, especially if they feel stuck or overloaded.
- Storage: Utilize the ten drawers to organize clothing, accessories, linens, toys, or office supplies. The varied drawer sizes allow for flexible storage solutions.
- Removable Drawers: The fabric drawers are removable and can be folded flat for compact storage when not in use or during relocation.
6. Care and Maintenance
Proper care will extend the life and appearance of your dresser.
- Cleaning the Frame and Top: Wipe the steel frame and MDF wood top with a dry cloth to remove dust and spills. Avoid abrasive cleaners.
- Cleaning Fabric Drawers: The fabric drawers are made of breathable, waterproof material and are easy to clean. Spot clean with a damp cloth and mild soap if necessary. Allow to air dry completely before reinserting. Do not machine wash or tumble dry.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Tighten as needed.
7. Troubleshooting
If you encounter any issues with your dresser, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Dresser feels wobbly | Loose connections; uneven surface | Ensure all screws are tightened. Place on a level surface. |
| Drawers do not slide smoothly | Overloaded drawer; obstruction; drawer not fully unfolded | Reduce contents in the drawer. Check for any items blocking the drawer path. Ensure the bottom panel is fully inserted and the drawer is properly shaped. |
| Missing parts during assembly | Packaging error | Contact Sorbus customer support with your model number and a description of the missing part. |
8. Product Specifications
| Feature | Detail |
|---|---|
| Brand | Sorbus |
| Model Name | DRW-CU10-RUBLK |
| Overall Dimensions (D x W x H) | 11.8" x 34" x 47.2" (30 cm x 86.4 cm x 119.9 cm) |
| Drawer Dimensions (approx.) | 15.4" x 11.2" x 8.7" (39.1 cm x 28.4 cm x 22.1 cm) |
| Color | Gray Wood |
| Material | Steel Frame, MDF Wood Top, Fabric Drawers |
| Number of Drawers | 10 |
| Item Weight | 32.4 lbs (14.7 kg) |
| Assembly Required | Yes |
| UPC | 192405349133 |
Image 3: Detailed dimensions of the Sorbus 10-Drawer Dresser and a single drawer.
9. Warranty and Support
For information regarding warranty coverage, replacement parts, or customer support, please visit the official Sorbus website or contact their customer service department directly. Please have your model number (DRW-CU10-RUBLK) and purchase information ready when contacting support.
You can find more information about Sorbus products at their official store: Sorbus Store on Amazon
