1. Introduction
Thank you for choosing the PowerBass XL-SBC Sound Bar Power Cable V1. This cable is designed as a direct plug-in replacement or spare power cable for your PowerBass XL-800, XL-1000, or XL-1200 series soundbar. This manual provides essential information for the proper installation, operation, and maintenance of your power cable to ensure optimal performance and longevity.
2. Product Overview
The PowerBass XL-SBC is a robust power cable engineered to provide reliable power delivery to compatible PowerBass soundbars. It features a durable construction and specific connectors for a secure and efficient connection.
2.1 What's in the Box
- 1 x PowerBass XL-SBC Sound Bar Power Cable V1
2.2 Product Image
3. Setup and Installation
Follow these steps to properly connect your PowerBass XL-SBC power cable to your compatible soundbar.
- Ensure Power is Off: Before connecting or disconnecting any cables, ensure your soundbar and any connected audio sources are powered off and unplugged from the main power outlet.
- Locate the Power Input: Identify the power input port on your PowerBass XL-800, XL-1000, or XL-1200 soundbar. This port is specifically designed to accept the XL-SBC cable's multi-pin connector.
- Connect the Cable: Align the multi-pin connector of the XL-SBC cable with the corresponding port on your soundbar. Gently push the connector in until it is fully seated and secure. Do not force the connection.
- Connect to Power Source: Plug the other end of the XL-SBC power cable into a suitable 12V DC power source (e.g., vehicle battery, power distribution block) as per your soundbar's installation guide. Ensure the connection is secure and properly fused.
- Verify Connections: Double-check all connections to ensure they are tight and correctly oriented. Loose connections can lead to intermittent power or poor performance.
- Power On: Once all connections are secure, you may power on your soundbar according to its operating instructions.
Safety Note: Always ensure proper polarity when connecting to a DC power source to prevent damage to your soundbar or vehicle electrical system. Consult a professional if you are unsure about the electrical connections.
4. Operating Instructions
The PowerBass XL-SBC is a passive power cable and does not require specific operational steps beyond proper installation. Once correctly connected to your soundbar and a power source, it will facilitate power delivery to the soundbar. Refer to your PowerBass soundbar's user manual for specific operating instructions related to the soundbar itself.
5. Maintenance
Proper maintenance ensures the longevity and reliable performance of your power cable.
- Cleaning: Periodically wipe the cable and connectors with a dry, soft cloth to remove dust and debris. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Regularly inspect the cable for any signs of damage, such as cuts, fraying, or bent pins on the connectors. If damage is observed, discontinue use and replace the cable.
- Storage: When not in use, store the cable in a clean, dry place, away from extreme temperatures and direct sunlight. Avoid tightly coiling or bending the cable sharply, which can damage internal wires.
6. Troubleshooting
If you experience issues with your soundbar's power, consider the following troubleshooting steps related to the power cable:
- No Power to Soundbar:
- Ensure the XL-SBC cable is securely connected to both the soundbar and the power source.
- Verify that the power source (e.g., vehicle battery) is providing adequate voltage.
- Check any inline fuses on the power line for continuity and replace if blown.
- Inspect the cable for visible damage.
- Intermittent Power:
- Check all connections for looseness. Tighten as necessary.
- Ensure the cable is not being pinched or stressed, which could cause internal breaks.
If these steps do not resolve the issue, consult your soundbar's manual or contact PowerBass customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | PowerBass |
| Model Number | XL-SBC |
| Compatibility | PowerBass XL-800, XL-1000, XL-1200 Soundbars (V1 Series) |
| Material | Plastic (likely PVC) |
| Connector Type | Standard Multi-pin Power Cord Connector |
| Product Dimensions (Packaged) | 3 x 10 x 13 inches |
| Item Weight (Packaged) | 1.5 pounds |
| UPC | 823871009237 |
8. Warranty and Support
The PowerBass XL-SBC Sound Bar Power Cable V1 is covered by a manufacturer's warranty. Please refer to the warranty information provided with your original soundbar purchase or visit the official PowerBass website for details regarding warranty terms and conditions.
For technical support, troubleshooting assistance, or warranty claims, please contact PowerBass customer service through their official website or the contact information provided with your product documentation. When contacting support, please have your product model number (XL-SBC) and proof of purchase readily available.
PowerBass Official Website: www.powerbassusa.com
