1. Introduction
Thank you for choosing the Olimpia Splendid 99264 CALDO SKY B WIFI Ceramic Wall-Mounted Fan Heater. This manual provides essential information for the safe and efficient use of your new appliance. Please read it thoroughly before installation and operation, and keep it for future reference.
2. Important Safety Information
Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.
- Read all instructions before using this heater.
- Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.
- Do not use this heater if it has been dropped.
- Do not use if there are visible signs of damage to the heater.
- Use this heater on a horizontal and stable surface, or fix it to the wall, as applicable.
- Keep combustible materials, such as furniture, curtains, and other flammables at least 1 meter (3 feet) from the front and sides of the heater.
- Do not use this heater with a programmer, timer, separate remote-control system or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorrectly.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
- Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
3. Package Contents
Carefully unpack your new fan heater and check that all items are present and undamaged. If any items are missing or damaged, contact your retailer immediately.
- Olimpia Splendid CALDO SKY B WIFI Ceramic Wall-Mounted Fan Heater
- Remote Control
- Wall Mounting Kit (screws, anchors)
- User Manual (this document)
4. Product Overview
Familiarize yourself with the main components and control panel of your fan heater.
Image 4.1: Front view of the Olimpia Splendid CALDO SKY B WIFI ceramic wall-mounted fan heater. This image shows the sleek, rectangular design of the heater, with the control panel visible on the right side.
Control Panel
Image 4.2: Close-up view of the digital control panel. The panel features a central digital display showing the temperature, surrounded by touch-sensitive buttons for power, mode selection, timer, and Wi-Fi indicator.
- Digital Display: Shows current temperature, timer settings, and operating modes.
- Power Button: Turns the unit on or off.
- Mode Button: Cycles through heating modes (Fan, 1000W, 2000W).
- Temperature Adjustment Buttons: Increases or decreases the desired temperature.
- Timer Button: Sets the operating timer.
- Wi-Fi Indicator: Shows Wi-Fi connection status.
5. Setup and Installation
This fan heater is designed for wall-mounting. Ensure the installation location is suitable and follows all safety guidelines.
5.1 Wall Mounting
- Choose a suitable wall location, ensuring it is at least 35 cm (13.8 inches) from the ceiling and away from curtains or other flammable materials.
- Using the provided mounting template (if included) or by measuring the heater's mounting points, mark the drill holes on the wall.
- Drill holes at the marked positions and insert the wall anchors.
- Secure the mounting bracket (if separate) to the wall using the provided screws.
- Carefully lift the heater and attach it to the mounting bracket/wall, ensuring it is securely fastened.
Image 5.1: The Olimpia Splendid CALDO SKY B WIFI fan heater installed on a wooden wall in a room setting. This illustrates the typical appearance and placement of the unit after successful wall mounting.
5.2 Power Connection
Once mounted, plug the power cord into a suitable 220-240V electrical outlet. Ensure the outlet is easily accessible and not overloaded.
5.3 Wi-Fi Setup
To utilize the smart features, connect your heater to your home Wi-Fi network.
- Download the dedicated Olimpia Splendid app (or Tuya Smart app, if specified in product documentation) from your smartphone's app store.
- Register or log in to your account.
- Ensure your heater is powered on and the Wi-Fi indicator is blinking (refer to the app for specific pairing instructions).
- Follow the in-app instructions to add your device. It is recommended to perform the initial pairing near your Wi-Fi router for optimal connection.
- Once connected, the Wi-Fi indicator on the heater will become solid. You can now control the heater via the app.
6. Operating Instructions
This section details how to operate your fan heater using both the control panel and the remote control/app.
6.1 Basic Operation
- Power On/Off: Press the Power Button on the control panel or remote control to turn the heater on or off.
- Mode Selection: Press the Mode Button repeatedly to cycle through the available operating modes:
- Fan Only: Circulates air without heating.
- Low Heat (1000W): Provides moderate heating.
- High Heat (2000W): Provides maximum heating for faster room warming.
- Temperature Adjustment: Use the Temperature Up and Temperature Down buttons to set your desired room temperature. The heater will automatically adjust its output to maintain this temperature.
6.2 Timer Function
The timer function allows you to set a specific duration for the heater to operate before automatically turning off.
- Press the Timer Button. The display will show a flashing number.
- Use the Temperature Up and Temperature Down buttons to set the desired operating hours (e.g., 1-12 hours).
- The timer will activate after a few seconds of inactivity, and the heater will turn off automatically once the set time expires.
6.3 Smart Control (Wi-Fi / App)
Once connected to Wi-Fi, you can control your heater remotely using the dedicated smartphone app.
- Remote On/Off: Turn the heater on or off from anywhere.
- Mode and Temperature Control: Adjust heating modes and set temperatures via the app interface.
- Scheduling: Create custom schedules for the heater to turn on/off at specific times and days.
- Voice Control: Integrate with smart home assistants (e.g., Amazon Alexa, Google Assistant) for voice commands. Refer to the app's help section for specific voice command setup.
7. Maintenance and Cleaning
Regular maintenance ensures optimal performance and extends the lifespan of your heater.
- Always unplug the heater from the power outlet and allow it to cool completely before cleaning.
- Exterior Cleaning: Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Air Inlet/Outlet: Periodically clean the air inlet and outlet grilles with a vacuum cleaner or a soft brush to remove dust and debris. Ensure these areas are clear for proper airflow.
- Storage: If storing the heater for an extended period, unplug it, clean it thoroughly, and store it in its original packaging or a dust-free, dry location.
8. Troubleshooting
If you encounter issues with your heater, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | No power supply. Power button not pressed. | Check if the power cord is securely plugged in. Ensure the wall outlet is functioning. Press the Power button on the unit or remote. |
| No heat output. | Fan-only mode selected. Temperature setting too low. Overheat protection activated. | Select a heating mode (1000W or 2000W). Increase the desired temperature setting. Unplug the heater, let it cool for 30 minutes, then plug it back in. Ensure air inlets/outlets are not blocked. |
| Wi-Fi connection fails. | Incorrect Wi-Fi password. Heater too far from router. Router settings (e.g., 5GHz network). | Double-check the Wi-Fi password. Move the heater closer to the router during setup. Ensure your router is broadcasting a 2.4GHz network, as most smart devices do not support 5GHz. Reset the heater's Wi-Fi and try pairing again. |
| Heater makes a beeping sound. | Normal operation feedback. | Some operations (like changing settings) may produce a beep. This is normal and cannot be disabled. |
If the problem persists after trying these solutions, please contact customer support.
9. Specifications
| Feature | Detail |
|---|---|
| Brand | Olimpia Splendid |
| Model Number | 99264 (TRVSPL99264) |
| Type | Ceramic Wall-Mounted Fan Heater |
| Power | 2000 W (Max) |
| Voltage | 220-240 V |
| Number of Speeds | 3 (Fan, 1000W, 2000W) |
| Color | Blue |
| Special Features | Wi-Fi Connection, Voice Control |
| Item Weight | 2.8 Kilograms |
| Heating Method | Convection |
| Recommended Use | Indoor (Living room, bedroom) |
| Mounting Type | Wall Mount |
10. Warranty and Customer Support
For warranty information, please refer to the documentation provided with your purchase or visit the official Olimpia Splendid website. If you require technical assistance, have questions about operation, or need to report a fault, please contact Olimpia Splendid customer support or your retailer.
Keep your purchase receipt as proof of purchase for warranty claims.
