IMEX ANG005
IMEX Wall-Mounted Rectangular PVC Soap Dish - Model ANG005
Instruction Manual
Introduction
Thank you for choosing the IMEX Wall-Mounted Rectangular PVC Soap Dish, Model ANG005. This manual provides essential information for the safe and correct installation, operation, and maintenance of your new soap dish. Please read these instructions carefully before installation and retain them for future reference.
Safety Information
- Always ensure the mounting surface is suitable and can support the weight of the soap dish and its contents.
- Use appropriate tools for installation.
- Wear safety glasses during drilling to protect your eyes.
- Keep small parts and packaging materials away from children.
- Do not overload the soap dish beyond its intended capacity.
Package Contents
Please check that all components are present before beginning installation:
- 1 x IMEX Wall-Mounted Rectangular PVC Soap Dish (Model ANG005)
- Mounting hardware (screws, wall anchors)
- Instruction Manual
Setup and Installation
This soap dish is designed for wall-mounted installation using screws. Ensure you have the necessary tools:
- Drill
- Drill bit appropriate for wall anchors
- Screwdriver
- Pencil
- Measuring tape
- Level
Installation Steps:
- Choose Location: Select a suitable location on your bathroom or kitchen wall. Ensure there are no hidden pipes or electrical wires behind the drilling area.
- Mark Drilling Points: Hold the soap dish against the wall at the desired height and use a pencil to mark the positions for the mounting holes. Use a level to ensure the marks are perfectly horizontal.
- Drill Holes: Using the appropriate drill bit, carefully drill holes at the marked points. The depth and diameter of the holes should match the provided wall anchors.
- Insert Wall Anchors: Gently tap the wall anchors into the drilled holes until they are flush with the wall surface.
- Mount Soap Dish: Align the mounting holes of the soap dish with the wall anchors. Insert the screws through the soap dish and into the wall anchors. Tighten the screws firmly until the soap dish is securely fixed to the wall. Do not overtighten.
- Verify Stability: Gently tug on the installed soap dish to ensure it is stable and securely attached before placing items on it.
Note: This product is designed for screw-based wall mounting. Adhesive methods are not recommended for secure installation.
Operating Instructions
The IMEX Rectangular PVC Soap Dish is designed to hold soap bars, small bottles, or other bathroom/kitchen essentials. Simply place your items onto the dish. The slatted design allows for water drainage, keeping your items dry and clean.
Figure 1: The IMEX Rectangular PVC Soap Dish in use, holding various bathroom items. The matte black finish complements modern decor, and the open design promotes drainage.
Care and Maintenance
To ensure the longevity and appearance of your IMEX soap dish, follow these simple care instructions:
- Cleaning: Wipe regularly with a soft, damp cloth. For stubborn stains, use a mild soap solution and rinse thoroughly.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, scouring pads, or strong chemical detergents, as these can damage the PVC material and matte finish.
- Drying: Dry with a soft cloth to prevent water spots, especially in hard water areas.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Soap dish feels loose after installation. | Screws not tightened sufficiently, or wall anchors not properly seated. | Ensure screws are tightened firmly. If still loose, remove, check wall anchors, and re-install. If wall anchors are damaged, replace them. |
| Water pooling in the dish. | Drainage slots are blocked. | Clean the drainage slots to remove any soap residue or debris. |
| Scratches or damage to the finish. | Use of abrasive cleaners or sharp objects. | Avoid using abrasive materials for cleaning. Handle with care to prevent scratches. Damage to the finish is typically not repairable. |
Specifications
| Model: | ANG005 |
| Brand: | IMEX |
| Material: | Polyvinyl Chloride (PVC) |
| Color: | Matte Black |
| Dimensions (Length): | 28 cm (280 mm) |
| Dimensions (Width): | 10.5 cm (105 mm) |
| Dimensions (Height): | 11 cm (110 mm) |
| Mounting Type: | Wall-mounted with screws |
| Recommended Use: | Bathroom, Kitchen |
Figure 2: Technical drawing showing the dimensions of the IMEX Rectangular PVC Soap Dish. The top view indicates a length of 280mm and a width of 105mm. The side view shows a total height of 110mm.
Warranty Information
IMEX products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official IMEX website. Keep your proof of purchase for any warranty claims.
Customer Support
If you have any questions, require assistance with installation, or encounter any issues with your IMEX Wall-Mounted Rectangular PVC Soap Dish, please contact our customer support team. Contact details can typically be found on the product packaging or the official IMEX website.
For more information about IMEX products, please visit: www.imexproducts.com
Related documentsANG005
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.