Introduction
Thank you for choosing the Porodo Gaming Mouse 7D Wired. This manual provides detailed instructions on how to set up, operate, and maintain your new gaming mouse. Please read this manual carefully before using the product to ensure optimal performance and longevity.

Figure 1: Porodo Gaming Mouse 7D Wired. This image shows the top view of the mouse, highlighting its ergonomic design and vibrant RGB lighting strip along the sides and logo.
Setup Guide
Follow these steps to set up your Porodo Gaming Mouse:
- Connect the Mouse: Insert the USB connector of the gaming mouse into an available USB port on your computer. The mouse is plug-and-play, and your operating system should automatically detect and install the necessary drivers.
- Initial Power-On: Once connected, the mouse's RGB lighting will illuminate, indicating it is powered on and ready for use.
- Software Installation (Optional): For advanced customization, including macro programming and detailed DPI settings, download the dedicated macro software from the official Porodo website. Refer to the software's instructions for installation and usage.

Figure 2: Front angled view of the mouse. This image provides a clear view of the scroll wheel, left and right click buttons, and the front portion of the RGB lighting.
Operating Instructions
The Porodo Gaming Mouse features 7 programmable buttons and customizable RGB lighting for an enhanced gaming experience.
- Basic Functions: The left and right click buttons perform standard mouse actions. The scroll wheel allows for vertical scrolling and also functions as a middle click button.
- DPI Adjustment: The mouse supports DPI settings up to 6400 DPI. Use the dedicated DPI button (usually located behind the scroll wheel) to cycle through preset DPI levels. Higher DPI settings increase cursor sensitivity, ideal for fast-paced gaming.
- 7D Buttons: This mouse features 7 distinct buttons. In addition to the standard left, right, and middle clicks, there are typically two side buttons (forward/back) and a DPI button. The seventh button's function may vary or be programmable via software.
- RGB Lighting: The mouse features 6 breathing RGB lighting modes. These modes cycle through various colors and effects, enhancing the aesthetic appeal. Lighting modes can often be adjusted or turned off via the macro software.
- Macro Software Function: Utilize the macro software to assign custom functions, complex key sequences, or macros to any of the 7 buttons. This allows for personalized control and efficiency in games and applications.

Figure 3: Angled view of the mouse, highlighting the side buttons. This perspective shows the ergonomic curve and the placement of the thumb buttons, which are often used for navigation or custom macros.
Maintenance and Care
Proper maintenance ensures the longevity and optimal performance of your gaming mouse:
- Cleaning: Use a soft, dry cloth to wipe the rubberized surface of the mouse. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials.
- Sensor Cleaning: Occasionally, use a cotton swab or compressed air to clean the optical sensor on the underside of the mouse to prevent tracking issues.
- Cable Care: Avoid sharp bends or kinks in the mouse cable to prevent internal wire damage. Do not pull the mouse by its cable.
- Storage: When not in use for extended periods, store the mouse in a clean, dry environment away from direct sunlight and extreme temperatures.
Troubleshooting
If you encounter issues with your Porodo Gaming Mouse, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Mouse not responding | Loose USB connection, faulty USB port, driver issue. | Ensure USB cable is securely plugged in. Try a different USB port. Restart your computer. Check Device Manager for driver issues. |
| Erratic cursor movement | Dirty optical sensor, unsuitable mouse pad surface. | Clean the optical sensor on the mouse's underside. Use a clean, uniform mouse pad. |
| RGB lighting not working | Software setting, power issue. | Check settings in the macro software. Ensure the mouse is properly powered. |
| Buttons not functioning | Software configuration, physical damage. | Verify button assignments in the macro software. Test on another computer to rule out software conflicts. |
Product Specifications
- Model Number: PDX311-BK
- Brand: Porodo
- Connectivity: Wired (USB)
- Number of Buttons: 7
- DPI: Up to 6400 DPI
- Tracking Speed: 28 IPS (Inches Per Second)
- RGB Lighting: 6 Breathing RGB modes
- Surface: Rubberized
- Special Feature: Ergonomic Design
- Product Dimensions: 10 x 7 x 3.2 inches
- Item Weight: 8.8 ounces

Figure 4: Top view of the mouse, illustrating its full length and ergonomic shape. This view emphasizes the symmetrical design and the central placement of the scroll wheel and DPI button.
Warranty and Support
For warranty information, please refer to the warranty card included with your purchase or visit the official Porodo website. For technical support or further inquiries, please contact Porodo customer service through the channels provided on their official website.
Manufacturer: Porodo





