EAGLE PEAK Pop Up Canopy Tent Instruction Manual

Introduction

Thank you for choosing the EAGLE PEAK Pop Up Canopy Tent. This manual provides detailed instructions for the safe and efficient setup, operation, maintenance, and storage of your new canopy. Please read all instructions carefully before use to ensure proper functionality and longevity of the product.

Image: The EAGLE PEAK 6.6x6.6 ft Pop Up Canopy Tent, showcasing its compact design and included wheeled carry bag.

Safety Information

Caution:

• Handle sharp edges or heavy components with care during assembly and disassembly.
• Keep the canopy away from open flames or high heat sources.
• Use caution during assembly, disassembly, and transportation to prevent injury.
• Secure the product properly for outdoor use, especially in windy conditions, to prevent tipping or damage.

Package Contents

Your EAGLE PEAK Pop Up Canopy Tent package includes the following components:

• 1 x Canopy Frame (Alloy Steel)
• 1 x Canopy Top (150D Oxford Fabric, Blue)
• 1 x Wheeled Roller Bag (600x300D)
• 4 x Guy Ropes
• 8 x Steel Stakes

Image: All included components of the canopy tent laid out for clear identification.

Setup Instructions

The EAGLE PEAK Pop Up Canopy Tent features an easy setup design with the patented Peak Push system, allowing for quick assembly without tools.

Step 1: Unfolding the Frame

With a partner, gently pull the frame legs outwards to begin unfolding the canopy frame. Ensure the frame is on a flat, stable surface.

Step 2: Attaching the Canopy Top

Drape the canopy top over the unfolded frame. Secure the corners of the canopy top to the frame's corners using the attached fasteners (e.g., Velcro straps).

Step 3: Engaging the Center Lock (Peak Push System)

From underneath the canopy, push up on the center lock mechanism until it clicks into place. This will fully extend the canopy top and lock the frame securely.

Step 4: Adjusting Height

Press the red buttons on each leg to release the height locking pins. Extend the legs to your desired height (High: 8.3 ft, Medium: 7.97 ft, Low: 7.65 ft) and ensure the pins securely re-engage in the holes.

Step 5: Securing the Canopy

For stability, especially in outdoor conditions, use the provided guy ropes and steel stakes. Attach the guy ropes to the canopy's corners and stake them firmly into the ground at an angle. Consider using sandbags (not included) for additional weight and stability.

Image: Visual guide demonstrating the three key steps for quick and easy canopy setup.

Image: Close-up views highlighting key product features such as the eave connection, guy ropes, height adjustment mechanism, water-resistant fabric, and reinforced corner fabric for durability.

Operating Your Canopy

Disassembly and Storage

To take down the canopy, reverse the setup steps:

1. Release the height locking pins on each leg and fully retract them.
2. From underneath, twist the center lock dial to unlock the Peak Push system, allowing the canopy top to collapse.
3. Carefully remove the canopy top from the frame.
4. Push the frame legs inwards to fully collapse the frame.
5. Place the folded frame and canopy top into the wheeled carry bag for easy transport and storage.

Image: The portable roller bag, designed to easily fit into a car trunk for convenient transportation.

Maintenance

Proper maintenance will extend the life of your EAGLE PEAK canopy:

• Cleaning: Clean the canopy top with mild soap and water. Do not use harsh detergents or abrasive cleaners. Rinse thoroughly.
• Drying: Always ensure the canopy top is completely dry before folding and storing to prevent mildew and fabric degradation.
• Frame Care: Inspect the steel frame periodically for any signs of rust or damage. Clean and lubricate moving parts as needed.
• Storage: Store the canopy in its wheeled carry bag in a cool, dry place away from direct sunlight and extreme temperatures.

Troubleshooting

Here are some common issues and their solutions:

• Canopy Not Opening/Closing Smoothly: Check for any obstructions in the frame's scissor mechanisms. Ensure all locking pins are fully disengaged or engaged as required. Lubricate joints if necessary.
• Canopy Instability/Wind Damage: Always use the provided stakes and guy ropes. In strong winds, it is recommended to take down the canopy to prevent damage to the frame or fabric. Consider additional weight bags for extra stability.
• Water Leakage: While the canopy fabric is water-resistant, prolonged exposure to heavy rain may lead to minor leaks, especially around seams. Ensure the canopy is taut to allow water runoff.
• Fabric Tears/Wear: Avoid dragging the canopy top on rough surfaces. Ensure the frame is fully extended before attaching the top to prevent undue stress on the fabric.

Specifications

Image: Diagram illustrating the dimensions and adjustable height settings of the canopy.

Warranty and Support

EAGLE PEAK offers a 1-year limited after-sale protection from the date of purchase. This warranty covers the frame, canopy top, and carry bag. For any questions, issues, or support needs, please contact our professional service team. We are committed to providing high-quality solutions and ensuring your satisfaction.

For further assistance, please visit the EAGLE PEAK Store on Amazon.