Borne True Wireless Stereo Earbuds BTWS250 User Manual

Introduction

This manual provides detailed instructions for the Borne True Wireless Stereo Earbuds, Model BTWS250. Please read this manual thoroughly before using the product to ensure proper operation and to maximize your user experience. Keep this manual for future reference.

Product Overview

The Borne BTWS250 True Wireless Stereo Earbuds offer a seamless audio experience with their in-ear design and Bluetooth V5.0 connectivity. They feature a built-in microphone for hands-free stereo calling and come with a portable charging case for extended use. These earbuds are compatible with both iPhone and Android devices.

Image: The Borne BTWS250 True Wireless Stereo Earbuds, white in color, are shown resting inside their open white charging case. The "borne" logo is visible on the front of the charging case.

Package Contents

• Borne True Wireless Stereo Earbuds (Left and Right)
• Charging Case
• User Manual
• Charging Cable (not explicitly mentioned but implied for charging case)

Setup Guide

1. Initial Charging

Before first use, fully charge the earbuds and the charging case. Place the earbuds into the charging case and connect the charging case to a power source using a compatible charging cable. The indicator lights on the case and earbuds will show charging status.

2. Pairing with a Device

1. Ensure the earbuds are charged and placed in the charging case.
2. Open the charging case. The earbuds will automatically enter pairing mode, indicated by a flashing light on one of the earbuds.
3. On your smartphone or other Bluetooth-enabled device, go to the Bluetooth settings.
4. Search for available devices and select "Borne BTWS250" from the list.
5. Once connected, a voice prompt will confirm successful pairing, and the indicator light on the earbud will stop flashing.

Note: If pairing fails, turn off Bluetooth on your device, close the charging case, then repeat the steps. For subsequent use, the earbuds will automatically connect to the last paired device when removed from the case.

Operating Instructions

Power On/Off

• Power On: Open the charging case, or long-press the touch control area on both earbuds for 3 seconds.
• Power Off: Place the earbuds back into the charging case and close the lid, or long-press the touch control area on both earbuds for 5 seconds.

Music Playback (Touch Control)

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap the right earbud.
• Previous Track: Double tap the left earbud.
• Volume Up: Triple tap the right earbud.
• Volume Down: Triple tap the left earbud.

Call Management (Touch Control)

• Answer/End Call: Single tap on either earbud during an incoming call or active call.
• Reject Call: Long-press on either earbud for 2 seconds during an incoming call.

Voice Assistant

• Activate Voice Assistant: Long-press on either earbud for 2 seconds (when not on a call).

Charging

Charging the Earbuds

Place the earbuds into the charging case. They will automatically begin charging. The indicator lights on the earbuds will show their charging status and turn off when fully charged.

Charging the Case

Connect the charging case to a USB power adapter or computer USB port using the provided charging cable. The indicator light on the charging case will show charging progress and turn solid when fully charged.

Note: A full charge for both earbuds and case typically takes approximately 1-2 hours.

Maintenance

• Cleaning: Use a soft, dry, lint-free cloth to clean the earbuds and charging case. Do not use abrasive cleaners or solvents.
• Storage: When not in use, store the earbuds in their charging case to protect them and keep them charged. Avoid extreme temperatures.
• Water Resistance: These earbuds are not waterproof. Avoid exposure to liquids.

Troubleshooting

Specifications

Warranty and Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Borne customer service. Keep your proof of purchase for warranty claims.