Poolcandy Illuminated Galaxy 36" Pool Tube User Manual

1. Introduction

Welcome to the Poolcandy Illuminated Galaxy 36" Pool Tube user manual. This innovative pool tube combines a stunning deep space graphic print with vibrant LED illumination, providing a unique and exciting floating experience. Designed for durability and comfort, it's perfect for enhancing your time in pools, lakes, and beaches. Please read this manual thoroughly before use to ensure proper setup, operation, and maintenance.

Image 1.1: The Poolcandy Illuminated Galaxy Pool Tube, showcasing its vibrant design.

2. Safety Information

Your safety is paramount. Please adhere to the following guidelines:

• Adult Supervision Required: This product is not a life-saving device. Always use under competent adult supervision.
• Weight Limit: Do not exceed the maximum weight limit of 250 pounds.
• Battery Safety:
  • Requires 3 AA batteries (not included).
  • Do not mix old and new batteries.
  • Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.
  • Remove batteries if the product is not used for an extended period.
  • Dispose of batteries properly according to local regulations.
  • Ensure the battery compartment is securely sealed before placing the tube in water.
• Inflation: Do not over-inflate. Over-inflation can cause the tube to burst.
• Sharp Objects: Keep the tube away from sharp objects, heat sources, and open flames.
• Water Conditions: Use only in calm water conditions. Do not use in strong currents or open ocean.
• Age Range: Suitable for adults and teens.

3. Package Contents

Please check the package to ensure all items are present:

• 1 x Poolcandy Illuminated Galaxy 36" Pool Tube
• 1 x Repair Patch Kit

4. Setup

Follow these steps to set up your Poolcandy Illuminated Galaxy Pool Tube:

1. Unpack: Carefully remove the pool tube and repair patch kit from the packaging.
2. Battery Installation:
   • Locate the battery compartment on the pool tube. This is typically a waterproof casing.
   • Open the compartment using a small screwdriver if necessary.
   • Insert 3 AA batteries (not included), ensuring correct polarity (+/-).
   • Securely close the battery compartment, making sure the seal is tight to prevent water entry.
3. Inflation:
   • Locate the air valve on the tube.
   • Use an air pump (not included) to inflate the tube. A hand pump or electric pump is recommended.
   • Inflate until the tube is firm to the touch but not rigid. Do not over-inflate.
   • Close the air valve securely to prevent air leakage.

Image 4.1: The 36-inch dimensions of the Poolcandy Illuminated Galaxy Pool Tube.

5. Operating Instructions

Using your Poolcandy Illuminated Galaxy Pool Tube is simple:

1. Activating Lights: Locate the power button on the battery compartment. Press the button to turn on the illuminated multicolor LED lights.
2. Enjoying the Tube: Once inflated and lights are on (if desired), carefully enter the tube in the water.
3. Turning Off Lights: Press the power button again to turn off the LED lights when not in use or when storing.

Image 5.1: Users enjoying the illuminated pool tube in the water.

6. Maintenance

Proper maintenance will extend the life of your pool tube:

• Cleaning: After each use, rinse the tube with fresh water and wipe it clean with a soft cloth. Do not use harsh chemicals or abrasive cleaners.
• Drying: Ensure the tube is completely dry before deflating and storing to prevent mold and mildew.
• Storage:
  • Deflate the tube by opening the air valve and gently pressing out the air.
  • Fold or roll the tube loosely.
  • Store in a cool, dry place away from direct sunlight and extreme temperatures.
• Repair Patch Kit: In case of a small puncture, use the included repair patch kit.
  • Clean and dry the damaged area thoroughly.
  • Cut a patch slightly larger than the hole.
  • Apply adhesive (not included, typically PVC glue) to the patch and press firmly over the hole.
  • Allow to dry completely before re-inflating.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Warranty: This product comes with a 30-day manufacturer's warranty provided by B&D Group. This warranty covers manufacturing defects from the date of purchase. Please retain your proof of purchase for warranty claims.

Customer Support: For any questions, concerns, or warranty claims, please contact Poolcandy customer support.
You can visit the official Poolcandy store on Amazon for more information: Poolcandy Amazon Store.