1. Introduction
Thank you for choosing the Beghelli 65 LED GRANLUCE Emergency Light. This product is designed to provide reliable and efficient illumination during power outages or electrical failures. Featuring high-efficiency LED technology, it ensures significant safety and minimal energy consumption. This manual will guide you through the proper installation, operation, and maintenance procedures to ensure the longevity and optimal performance of your emergency light.
2. Important Safety Information
- Professional Installation: Installation should only be performed by a qualified electrician in accordance with local electrical codes and regulations.
- Power Disconnection: Always disconnect power at the circuit breaker before installing, servicing, or cleaning the unit.
- Voltage Compatibility: Ensure the supply voltage matches the requirements specified on the product label.
- Avoid Moisture: Do not expose the unit to water or excessive moisture. This product is designed for indoor use.
- No User Serviceable Parts: There are no user-serviceable parts inside. Do not attempt to open or repair the unit yourself. Contact qualified service personnel for assistance.
- Battery Safety: The unit contains a rechargeable battery. Dispose of batteries responsibly according to local regulations. Do not incinerate or expose to high temperatures.
- Mounting: Mount the unit securely to a stable surface to prevent it from falling.
3. Product Overview
The Beghelli 65 LED GRANLUCE Emergency Light (Model 19430) is a self-contained emergency luminaire. It is designed to provide essential lighting when the main power supply fails, ensuring safety and visibility in critical situations. Its compact design and robust construction make it suitable for various indoor environments.
Key Features:
- High Efficiency LED: Integrated LED system provides bright and energy-efficient illumination.
- Automatic Operation: Automatically activates upon power failure.
- Long Autonomy: Provides 1.5 hours of continuous light during emergencies.
- Durable Construction: Designed for long-term reliability.
- Easy Installation: Can be easily installed in various indoor settings.
Product Components:
4. Setup and Installation
WARNING: Installation must be carried out by a qualified electrician. Ensure power is disconnected before proceeding.
4.1. Internal Assembly (if required):
Some models may require internal battery connection and assembly before mounting. Refer to the video below for a visual guide on assembling the internal components.
- Carefully open the front cover of the emergency light unit.
- Connect the battery cable to the designated port on the circuit board. Ensure the polarity is correct.
- Place the circuit board and battery securely within the internal casing.
- Close the front cover, ensuring it clicks into place or is secured with any provided fasteners.
4.2. Mounting the Unit:
The emergency light is designed for wall mounting. The external casing provides secure attachment points.
- Choose a suitable location for mounting, ensuring it is clear of obstructions and provides adequate light distribution.
- Separate the external mounting base from the main light unit.
- Mark the drilling points on the wall using the mounting base as a template.
- Drill holes and insert appropriate wall plugs (if necessary).
- Secure the mounting base to the wall using screws.
- Connect the electrical wiring to the terminals inside the mounting base, following the wiring diagram provided with the product (not shown in video, but standard for electrical devices).
- Attach the main light unit (with internal components assembled) to the secured mounting base, ensuring a firm fit.
- Secure the main unit to the base using any provided screws or clips.
5. Operating Instructions
- Initial Charge: After installation, connect the unit to the main power supply. Allow the battery to charge for at least 24 hours before its first use to ensure full capacity.
- Normal Operation: When connected to the main power supply, the emergency light will remain off (or in standby mode). A small indicator light (usually green) on the unit will confirm that the battery is charging.
- Emergency Mode: In the event of a power failure, the emergency light will automatically switch on, providing illumination from its internal battery.
- Power Restoration: Once the main power supply is restored, the emergency light will automatically turn off and begin recharging its battery.
6. Maintenance
Regular maintenance ensures the reliable operation and longevity of your emergency light.
6.1. Cleaning:
- Disconnect power before cleaning.
- Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Ensure no moisture enters the unit.
6.2. Battery Care and Testing:
- Monthly Test: Simulate a power failure by turning off the circuit breaker supplying the emergency light for approximately 30 seconds. Verify that the light illuminates. Restore power and ensure the charging indicator light turns on.
- Annual Full Discharge Test: Once a year, perform a full discharge test. Disconnect power to the unit and allow it to operate until the battery is fully discharged (the light dims significantly or turns off). Reconnect power and allow the battery to recharge for 24 hours. This helps maintain battery health.
- Battery Replacement: The internal battery has a limited lifespan. If the unit fails to provide adequate illumination during a power outage or does not hold a charge, the battery may need replacement. This should be performed by a qualified technician using an original Beghelli replacement battery.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on during power failure. | No power to the unit; Battery not charged; Faulty battery; Unit malfunction. | Check circuit breaker. Ensure unit has been charged for 24 hours. Perform battery test. Contact qualified service personnel. |
| Light does not stay on for 1.5 hours. | Battery not fully charged; Battery at end of life. | Allow 24 hours for full charge. Perform annual full discharge test. Replace battery if necessary (by qualified technician). |
| Charging indicator light is off. | No main power; Faulty indicator light; Internal wiring issue. | Check main power supply. Contact qualified service personnel. |
8. Technical Specifications
- Brand: Beghelli
- Model Number: 19430
- Type: Plafoniera F65 LED LI-FE SE
- Power: 24W
- Luminous Flux: 1100 Lumens
- Autonomy (Emergency): 1.5 hours
- Dimensions (Product): 35.4 x 15.2 x 6.3 cm
- Dimensions (Package): 36 x 16 x 7 cm
- Weight (Product): 810 grams
- Material: Metal (housing), Plastic (lampshade)
- Color: White
- Style: Minimalist
- Light Direction: LED
- Power Source: Corded Electric
- Switch Style: Push Button
- Switch Installation Type: Wall Mount
- Certification: CE
- Energy Consumption Class (EU): 45.83 lumens per watt
- Lifespan (LED): 50,000 hours
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation included with your purchase or visit the official Beghelli website. Keep your proof of purchase for any warranty claims.
Manufacturer: BEGHELLI
