DaVinci F16901CT

Carter's by DaVinci Nolan 4-in-1 Baby Crib Instruction Manual

Model: F16901CT

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your Carter's by DaVinci Nolan 4-in-1 Baby Crib. This versatile crib is designed to adapt to your child's growth, converting from a standard crib to a toddler bed, daybed, and full-size bed (conversion kits sold separately). Crafted from sustainably sourced solid New Zealand pine wood, it is GREENGUARD Gold Certified, ensuring a healthier indoor environment for your baby. Please read all instructions carefully before assembly and use.

Setup

Assembly of the Carter's by DaVinci Nolan 4-in-1 Baby Crib is required. All necessary hardware is included. For optimal safety and stability, ensure all components are correctly aligned and securely fastened according to the detailed instructions provided in the separate assembly guide. It is recommended to have two adults for assembly.

Assembled Carter's by DaVinci Nolan 4-in-1 Baby Crib in Chestnut finish

Figure 1: The Carter's by DaVinci Nolan 4-in-1 Baby Crib in its assembled crib configuration.

Operating Instructions

Adjustable Mattress Heights

The crib features four adjustable mattress height positions to accommodate your child's developmental stages and ensure their safety.

  • Highest Position: For newborns and infants who cannot push up on their hands and knees. This position allows for easier access to your baby.
  • Mid-High Position: For infants who can push up on their hands and knees but cannot yet sit unassisted.
  • Mid-Low Position: For babies who can sit upright unassisted.
  • Lowest Position: For toddlers who can stand. This position prevents climbing out of the crib.
Always adjust the mattress support to the lowest possible position as your child grows and becomes more mobile. Refer to the assembly guide for detailed instructions on adjusting the mattress height.

Diagram showing adjustable mattress heights for different baby stages

Figure 2: Illustration of the four adjustable mattress height settings, adapting to your baby's growth.

Conversion Options

The Nolan 4-in-1 Crib is designed to convert into a toddler bed, daybed, and full-size bed, extending its usability for many years.

  • Toddler Bed: Converts by removing the front rail and adding a toddler guard rail (Toddler kit #M3099, sold separately).
  • Daybed: Converts by removing the front rail, providing an open side for easy access.
  • Full-Size Bed: Converts using full-size bed rails (Full-size kit #M5789, sold separately) to create a standard full-size bed frame.
Detailed conversion instructions are included with the respective conversion kits.

Four images showing the crib converting from full size crib to toddler bed, day bed, and full size bed

Figure 3: The Nolan crib's versatility, showcasing its transformation into a toddler bed, daybed, and full-size bed.

Maintenance

To maintain the quality and appearance of your crib, wipe surfaces with a damp cloth. Avoid using abrasive cleaners or strong chemicals, as these may damage the finish. Regularly inspect all hardware and connections to ensure they remain tight and secure. The crib is finished with non-toxic, lead- and phthalate-safe paint, and is GREENGUARD Gold Certified for low chemical emissions, contributing to a healthier environment.

Upon initial unboxing, it is advisable to air out the product in a well-ventilated area for a few days to dissipate any residual manufacturing odors.

Troubleshooting

Should you encounter any issues with your crib, please refer to the following common troubleshooting tips:

  • Squeaking or Instability: Check all bolts and screws to ensure they are tightened securely. Loose hardware can cause instability and noise.
  • Difficulty Adjusting Mattress Height: Ensure the mattress support is free of obstructions and that the adjustment pins are fully engaged in the desired holes on all four corners.
  • Missing Parts or Damaged Components: If any parts are missing or damaged upon arrival, do not attempt to assemble the crib. Contact customer support immediately for assistance.
For issues not covered here, please contact DaVinci customer support.

Specifications

FeatureDetail
Model NumberF16901CT
BrandDaVinci
ColorChestnut
MaterialNew Zealand Pine Wood and TSCA compliant MDF
Product Dimensions (L x W x H)57.5"L x 30.75"W x 47"H
Item Weight66 Pounds
Maximum Weight Recommendation50 Pounds
Special FeaturesAdjustable, Convertible (4-in-1)
CertificationsGREENGUARD Gold Certified
Assembly RequiredYes
Included ComponentsHardware
Product Care InstructionsWipe with Damp Cloth

Warranty

For detailed warranty information regarding your Carter's by DaVinci Nolan 4-in-1 Baby Crib, please refer to the warranty card included with your product or visit the official DaVinci website. Protection plans may also be available for purchase separately.

Customer Support

If you require further assistance, have questions about assembly, parts, or product use, please contact DaVinci customer support.
Online Support: Visit the DaVinci Store on Amazon for product information and resources.
Manufacturer: Carter's by DaVinci

© 2025 DaVinci. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.