1. Introduction
This manual provides instructions for the safe and efficient use of your UpBright Car DC Power Adapter. This adapter is designed to charge compatible portable power stations, such as the Rockpals P63 500W/520Wh and PAXCESS Rockman 500 519Wh models, from a vehicle's 12V-24V DC power outlet.
Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.
2. Product Features
- Input Voltage: DC 12V - 24V (compatible with standard car, boat, RV cigarette lighter sockets).
- Output: Designed for specific portable power stations requiring 15V 6A.
- Compatibility: Specifically designed for Rockpals P63 500W/520Wh and PAXCESS Rockman 500 519Wh Lithium Battery Portable Power Stations.
- Durable Construction: Features a flexible wire made from high-quality, environmentally friendly TPE material, designed for toughness and resistance to wear and tear.
- Integrated Fuse: Includes a replaceable fuse for overcurrent protection.
Image: The flexible and durable TPE wire of the UpBright Car DC Power Adapter, designed for longevity.
3. Package Contents
- 1 x UpBright Car DC Power Adapter
- 1 x USB Cable (as per product specifications, though not directly part of the adapter's primary function)
Image: The UpBright Car DC Power Adapter as it appears in its packaging.
4. Setup Instructions
- Identify the DC Input Port: Locate the DC input port on your Rockpals P63 or PAXCESS Rockman 500 portable power station. Refer to your power station's manual for its specific port location.
- Connect to Power Station: Insert the barrel connector end of the UpBright Car DC Power Adapter into the DC input port of your power station. Ensure a secure connection.
- Connect to Vehicle Power Outlet: Insert the cigarette lighter plug end of the adapter into your vehicle's 12V-24V DC power outlet (cigarette lighter socket).
- Verify Charging: Once connected, your power station should indicate that it is receiving a charge. Check the power station's display for charging status.
Image: The UpBright Car DC Power Adapter connected to a compatible portable power station. The power station is not included with the adapter.
Image: The UpBright Car DC Power Adapter is suitable for use in cars, boats, and with portable power stations.
5. Operating Instructions
The UpBright Car DC Power Adapter is designed for straightforward operation. Once properly connected as described in the Setup section, it will begin to supply power to your compatible portable power station.
- Ensure your vehicle's engine is running or the accessory power outlet is active to provide power to the adapter.
- Monitor the charging status on your portable power station's display.
- Disconnect the adapter from both the power station and the vehicle outlet when charging is complete or when the adapter is not in use.
- Avoid leaving the adapter connected to a vehicle's power outlet for extended periods when the engine is off, as this may drain the vehicle's battery.
6. Maintenance
Replacing the Fuse
The car DC power adapter contains an internal fuse to protect against overcurrent. If the adapter stops working, the fuse may need replacement. Follow these steps:
- Unscrew the Tip: Gently unscrew the metal tip of the cigarette lighter plug.
- Remove the Old Fuse: Carefully remove the old fuse and the spring.
- Insert New Fuse: Place a new fuse of the correct rating (typically 10A or 15A, check the original fuse for its rating) into the adapter, followed by the spring.
- Reassemble: Screw the metal tip back onto the plug until it is secure.
Image: Visual guide for replacing the fuse in the car DC power adapter.
General Care
- Keep the adapter clean and dry.
- Avoid exposing the adapter to extreme temperatures or direct sunlight for prolonged periods.
- Do not attempt to disassemble or repair the adapter beyond fuse replacement.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Adapter not charging power station. |
|
|
| Adapter feels warm during use. | Normal operation. | This is generally normal. If it becomes excessively hot or emits smoke/smell, disconnect immediately and cease use. |
| Power station not recognizing adapter. | Incorrect voltage/amperage or faulty adapter. | Ensure the adapter is the correct model for your power station. If issues persist, contact customer support. |
8. Specifications
- Product Dimensions: 6 x 2 x 1 inches
- Item Weight: 3 ounces
- Input Voltage: 12 Volts (DC) - 24 Volts (DC)
- Amperage: 6 Amps
- Wattage: 500 watts (referring to compatible power station capacity)
- Connector Type: Barrel Connector
- Compatible Devices: Rockpals P63 500W, PAXCESS Rockman 500
- Manufacturer: UpBright
- Model Number: Rockpals 500W (referring to the compatible power station model)
9. Warranty and Support
UpBright products are designed for reliability and performance.
- Refund Policy: 30 days refund period from the date of purchase.
- Exchange Policy: 24 months exchange period for defective units.
For technical support or warranty claims, please contact UpBright customer service through the retailer where the product was purchased or visit the official UpBright website.
UpBright Store: Visit the UPBRIGHT Store on Amazon