Introduction
This manual provides instructions for the assembly, operation, and maintenance of your XtremepowerUS Universal 2-Step Spa & Hot Tub Steps with Storage. Please read thoroughly before use to ensure proper function and safety.
Important Safety Instructions
- Ensure all components are securely fastened before each use.
- Do not exceed the maximum weight capacity of 600 lbs (272 kg).
- Always use caution when stepping on or off the unit, especially when the surface is wet.
- Keep the storage compartment lid closed when not in use to prevent accidents and protect contents.
- Place the steps on a stable, level surface to prevent tipping.
Setup and Assembly
The XtremepowerUS 2-Step Spa & Hot Tub Steps are designed for straightforward assembly. Follow these steps carefully.

Figure 1: All individual parts included in the package, such as side walls, small and large supports, treads, the storage liner, hinges, screws, and gaskets, necessary for assembly.
Step 1: Assemble the Base Structure
- Attach the side walls to the medium support using the provided screws. Ensure the locking tabs are fully seated.
- Secure the large support to the assembled side walls, tapping down with a rubber mallet (not included) until seated.
- Install the bottom tread by placing its tapered edge into the groove of the large support. Apply pressure and tap gently with a rubber mallet until sealed onto the locking tabs.
Step 2: Install the Hinges
- Place the hinges (barrel side up) over the mortised area of the small support. Attach with the appropriate screws.
- Place the top tread on a flat surface with the bottom facing up. Position the hinges over the mortised area on the treads and fix with screws.
Step 3: Install the Storage Liner
- Open the top tread. Place the storage liner into the compartment and fix it securely with the provided screws and gaskets.

Figure 2: The fully assembled 2-step unit in gray, shown in an outdoor setting next to a hot tub, demonstrating its functional placement.
Operating Instructions
Accessing Your Spa
Use the two steps to safely enter and exit your spa or hot tub. The non-slip treads provide secure footing, reducing the risk of slips and falls.
Using the Storage Compartment
The top step features a hinged lid that opens to reveal a spacious storage compartment. Lift the lid to conveniently store spa accessories, chemicals, towels, or other items, keeping them organized and out of sight.

Figure 3: The top step lifted to expose the spacious storage area, filled with various spa-related items, highlighting its practical use.
Maintenance and Care
Proper maintenance ensures the longevity and appearance of your spa steps.
- Clean the steps regularly with mild soap and water. Avoid using abrasive cleaners or harsh chemicals, as these can damage the material.
- Rinse thoroughly with clean water after cleaning to remove any soap residue.
- Inspect the steps periodically for any loose screws, cracks, or other signs of damage. Tighten any loose fasteners and address damage promptly to maintain structural integrity.
- The high-density polyethylene construction is designed to be maintenance-free and resistant to rust, corrosion, and fading.
Troubleshooting
If you encounter any issues with your spa steps, consider the following common solutions:
- Instability: Ensure the steps are placed on a completely flat and level surface. Check that all assembly screws are tightened securely.
- Slippery Surface: Regularly clean the non-slip treads to remove any buildup of dirt, algae, or spa chemicals that could reduce traction.
- Lid Not Closing Properly: Check the hinges for any obstructions or damage. Ensure the storage liner is correctly seated and not interfering with the lid's closure.
Specifications
| Feature | Detail |
|---|---|
| Brand | XtremepowerUS |
| Model Name | Universal Spa Step With Storage |
| Model Number | 75167 |
| Color | Gray |
| Material | High Density Polyethylene (HDPE) |
| Item Weight | 24.8 pounds (11.25 kg) |
| Product Dimensions | 22.5 x 36 x 14.6 inches (57.15 x 91.44 x 37.08 cm) |
| Seating Capacity | 2 |
| Assembly Required | Yes |

Figure 4: A visual representation of the spa steps with key dimensions labeled, including width, depth, and height of each step, providing precise measurements for planning.
Warranty and Support
Warranty Information
For specific warranty details and terms, please refer to the manufacturer's official website or the documentation included with your purchase. Keep your original purchase receipt as proof of purchase for any warranty claims.
Customer Support
If you encounter any issues, have questions regarding your XtremepowerUS spa steps, or require technical assistance, please visit the official XtremepowerUS website or contact their customer support team directly for prompt and helpful assistance.





