Modern Flames 202313

Download PDF
Contents

Modern Flames 42-inch Redstone Built-In Electric Fireplace User Manual

Model: 202313

Brand: Modern Flames

1. Introduction

This manual provides essential instructions for the safe installation, operation, and maintenance of your Modern Flames 42-inch Redstone Built-In Electric Fireplace, Model 202313. Please read this manual thoroughly before installation and use, and retain it for future reference. Proper adherence to these instructions will ensure optimal performance and safety.

Modern Flames 42-inch Redstone Built-In Electric Fireplace displaying realistic flames and a log set.

Figure 1.1: The Modern Flames Redstone electric fireplace showcasing its Hybrid-FX flame technology and included log set.

2. Important Safety Information

Always follow basic safety precautions when using electrical appliances to reduce the risk of fire, electric shock, and injury to persons.

  • Read all instructions before using this fireplace.
  • This fireplace is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, and curtains at least 3 feet (0.9 m) from the front of the fireplace and keep them away from the sides and rear.
  • Extreme caution is necessary when any heater is used by or near children or invalids and whenever the fireplace is left operating and unattended.
  • Do not operate any fireplace with a damaged cord or plug or after the fireplace malfunctions, has been dropped or damaged in any manner. Return fireplace to authorized service facility for examination, electrical or mechanical adjustment, or repair.
  • Do not use outdoors.
  • Never locate fireplace where it may fall into a bathtub or other water container.
  • Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Arrange cord away from traffic area and where it will not be tripped over.
  • To disconnect fireplace, turn controls to off, then remove plug from outlet.
  • Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock or fire, or damage the fireplace.
  • To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not use on soft surfaces, like a bed, where openings may become blocked.
  • All electrical wiring must be performed by a qualified electrician and in accordance with local codes.

3. Package Contents

Upon unpacking, please verify that all components are present and undamaged:

  • Modern Flames Redstone Electric Fireplace Unit
  • Driftwood Log Set
  • Crystal Ember Media Kit
  • Standard Remote Control
  • Finish Trim Kits
  • User Manual (this document)

4. Setup and Installation

The Modern Flames Redstone fireplace is designed for built-in installation. It can be installed into an existing zero-clearance wood-burning fireplace opening or a custom-built wall cavity.

4.1 Site Preparation

Ensure the installation location provides adequate space and structural support. A minimum depth of 10 inches (25.4 cm) within a wall cavity is required for a flush-mount built-in look. For existing fireplace openings, ensure the dimensions accommodate the unit.

4.2 Electrical Requirements

This unit requires a dedicated, properly grounded 120V, 15 Amp circuit. All electrical connections must comply with local codes and the National Electrical Code (NEC). Consult a qualified electrician if you are unsure about your electrical setup.

4.3 Dimensions and Clearances

Refer to the technical drawings for precise measurements and required clearances. Maintain proper clearances from combustible materials as specified in the safety section.

Technical drawing showing front, side, and top dimensions of the Modern Flames Redstone electric fireplace.

Figure 4.3.1: Front, side, and top view dimensions of the fireplace unit. Key measurements include 39-3/4 inches (1009mm) width, 27 inches (686mm) height, and 9-7/8 inches (250mm) depth.

Technical drawing showing detailed front and side dimensions of the Modern Flames Redstone electric fireplace.

Figure 4.3.2: Detailed technical drawing illustrating the overall dimensions and mounting points. The front panel measures approximately 80 inches in width, with a viewing area of 79.88 inches.

4.4 Media Installation

The unit includes both a driftwood log set and a crystal ember media kit. Choose your preferred media and carefully place it onto the ember bed according to the separate assembly instructions provided with the media kit.

4.5 Finishing Trim

Utilize the included finish trim kits to create a seamless and polished appearance around the installed fireplace unit.

5. Operating Instructions

Your Modern Flames Redstone electric fireplace offers various settings for flame effects, lighting, and heating. The unit can be controlled via the integrated control panel or the included remote control.

5.1 Power On/Off

Press the power button on the control panel or remote to turn the unit on or off.

5.2 Flame Effects

The Hybrid-FX flame technology provides a realistic flame effect. You can select from 10 unique flame colors to match your ambiance. The flame and heat functions can operate independently.

5.3 Lighting

Adjust the high-intensity RGB up-lighting and down-lighting to further customize the visual display.

5.4 Heater Operation

Engage the integrated fan-forced heater for supplemental heat. The heater provides up to 5,000 BTU/hour and can warm areas up to 400 square feet. Set your desired temperature using the thermostat control, and the unit will automatically adjust to maintain it.

Image showing various flame color options (blue, orange, red) with and without logs, along with the remote control and control buttons on the fireplace.

Figure 5.4.1: Visual representation of the fireplace's standard features, including different flame color settings (blue, orange, red, with and without logs), the included remote control, and the integrated control buttons on the unit.

5.5 Remote Control

The standard remote control allows for convenient adjustment of all fireplace functions from a distance. Refer to the remote control guide for specific button functions.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your electric fireplace.

6.1 Cleaning

  • Always disconnect power before cleaning.
  • Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or sprays.
  • Clean the air intake and exhaust vents periodically with a vacuum cleaner attachment to prevent dust buildup.
  • The glass panel can be cleaned with a soft cloth and a non-abrasive glass cleaner.

6.2 Light Source

The flame effects are generated by LED lighting, which typically has a long lifespan and does not require user replacement. If you experience issues with the lighting, contact customer support.

7. Troubleshooting

If you encounter issues with your fireplace, refer to the following common troubleshooting steps:

  • No Power: Ensure the unit is properly plugged into a grounded outlet. Check the circuit breaker.
  • No Flame Effect: Verify the flame function is turned on via the control panel or remote. Check if any internal connections have come loose (consult a technician if unsure).
  • Heater Not Working: Ensure the heater function is activated and the thermostat is set above the current room temperature. Check for any obstructions in the air vents. The heater may have an overheat safety cutoff; unplug the unit for 15 minutes and try again.
  • Remote Control Not Responding: Replace the batteries in the remote control. Ensure there are no obstructions between the remote and the fireplace's receiver.
  • Unusual Noises: A slight fan noise is normal during heater operation. If you hear grinding or unusual sounds, discontinue use and contact customer support.

For issues not resolved by these steps, please contact Modern Flames customer support.

8. Specifications

FeatureDetail
BrandModern Flames
Model NameRedstone
Item Model Number202313
Installation TypeBuilt-In
Power SourceCorded Electric
Heat Output5000 British Thermal Units
Heating CoverageUp to 400 square feet
Special FeatureLED Flame, RGB Up/Down Lighting, 10 Flame Colors
Included ComponentsFan-forced heater, Driftwood Log Set, Crystal Ember Media Kit, Remote Control, Trim Kit
Product Dimensions48 x 40 x 36 inches (Overall shipping dimensions, refer to technical drawings for unit dimensions)
Item Weight130 pounds
UPC850011491256

9. Warranty Information

This Modern Flames Redstone Electric Fireplace comes with a Limited Warranty. For specific details regarding the terms, conditions, and duration of your warranty, please refer to the warranty card included with your product or contact Modern Flames customer support directly. Keep your proof of purchase for warranty claims.

10. Customer Support

If you have any questions, require technical assistance, or need to report a problem with your Modern Flames Redstone Electric Fireplace, please contact Modern Flames customer support. Contact information can typically be found on the manufacturer's website or on the packaging materials.

© 2023 Modern Flames. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.