Introduction
This manual provides essential information for the proper setup, operation, and maintenance of your BERNY Men's Quartz Watch, Model 2676MS. Designed with a solid stainless steel case and band, this watch features a precise quartz movement for accurate timekeeping, a day and date display, and luminous hands and markers for enhanced visibility in low light. It is also water-resistant to 3ATM.
Please read this manual thoroughly to ensure correct usage and to prolong the life of your timepiece.
Setup
Setting the Time and Date
Your BERNY 2676MS watch features a crown on the side for adjusting the time and date. Follow these steps:
- Setting the Date and Day: Gently pull the crown out to the first position. Turn the crown clockwise or counter-clockwise to adjust the date and day. Avoid setting the date and day between 9:00 PM and 3:00 AM, as this can interfere with the automatic date change mechanism.
- Setting the Time: Pull the crown out to the second position. Turn the crown to move the hour and minute hands to the desired time. To ensure accuracy, synchronize with a reliable time source.
- Finalizing Settings: Once the time and date are set, push the crown back into its normal operating position. Ensure it is fully pushed in to maintain water resistance.
Image: Diagram illustrating the two crown positions for setting the day/date and time.
Band Adjustment
The stainless steel band is designed for a secure fit. If the band is too loose or too tight, it may require adjustment by removing or adding links. This procedure typically requires specialized tools and is best performed by a professional watch technician to avoid damage to the band or clasp.
Operating the Watch
Reading the Time and Date
The watch features a classic analog display with hour, minute, and second hands. The day and date are displayed in a window at the 3 o'clock position.
Image: Front view of the BERNY 2676MS watch, highlighting the dial and day/date display.
Luminous Features
The hour markers and hands are coated with a luminous material, allowing you to read the time in low-light conditions after exposure to light. The luminescence will gradually fade over time and reactivate with further light exposure.
Image: The watch dial displaying its luminous features in darkness.
Maintenance
Water Resistance
Your BERNY 2676MS watch is rated for 3ATM (30 meters / 100 feet) water resistance. This means it is suitable for daily use and can withstand splashes, rain, and cold showers. It is not suitable for swimming, diving, or hot water activities (e.g., hot showers, saunas), as hot water can compromise the watch's seals. Always ensure the crown is fully pushed in before any contact with water.
Image: The watch demonstrating its 3ATM water resistance.
Cleaning
To maintain the appearance of your watch, regularly wipe the case and band with a soft, dry cloth. For more thorough cleaning, a slightly damp cloth can be used, ensuring the crown is fully pushed in. Avoid using harsh chemicals or abrasive materials, which can damage the finish.
Battery Replacement
The BERNY 2676MS uses a quartz movement powered by an SR626SW battery. The battery life typically lasts several years. When the watch stops or begins to lose time consistently, the battery likely needs replacement. It is recommended to have battery replacement performed by a qualified watch technician to ensure proper sealing and maintain water resistance.
Troubleshooting
- Watch Not Keeping Time: If the watch stops or consistently runs slow/fast, the battery may need replacement. If the issue persists after battery replacement, the movement may require inspection by a professional.
- Day/Date Not Advancing: Ensure the crown is fully pushed into its normal operating position after setting. If the day or date does not advance at midnight, try resetting it manually. If the problem continues, professional inspection is advised.
- Condensation Under Crystal: If you notice moisture or condensation under the watch crystal, this indicates a breach in the water resistance. Have the watch inspected and repaired by a professional immediately to prevent internal damage to the movement.
- Loose or Tight Band: If the stainless steel band is uncomfortable, it may need adjustment. As mentioned in the Setup section, this is best handled by a professional to ensure proper link removal/addition and clasp integrity.
Specifications
| Feature | Specification |
|---|---|
| Model Number | 2676MS-C |
| Case Material | Stainless Steel |
| Strap Material | Stainless Steel |
| Movement | Quartz Movement Miyota 2105 |
| Water Resistance | 3ATM (30 meters / 100 feet) |
| Clasp Type | Push Button Foldover Clasp With Safety |
| Lens Material | Mineral Glass |
| Case Diameter | 40mm (1.57 inches) |
| Case Thickness | 9.5mm (0.37 inches) |
| Band Width | 20mm (0.79 inches) |
| Max Wrist Circumference | 200mm (8 inches) |
| Weight | 116g (7.05 ounces) |
Image: Detailed dimensions of the BERNY 2676MS watch.
Product Overview Video
Video: A general product overview of the BERNY 2676MS watch, showcasing its design and features.
Warranty and Support
Warranty Information
BERNY provides a 1-year after-sales service warranty for this watch, covering manufacturing defects from the date of purchase. This warranty does not cover damage resulting from improper use, accidents, unauthorized repairs, or normal wear and tear.
Customer Support
For any questions, technical assistance, or warranty claims, please contact the BERNY Official Store directly. Their professional customer service team is available to provide support and satisfactory solutions.
