Introduction
Thank you for choosing the LEVOIT Vital 200S-P Smart Air Purifier. This manual provides essential information for safe operation, effective use, and proper maintenance of your device. Please read it thoroughly before use and retain it for future reference.
The LEVOIT Vital 200S-P is designed to significantly improve indoor air quality by capturing allergens, pet hair, dust, and odors, covering large rooms up to 1875 sq ft. It features smart controls via the VeSync app, an air quality monitor, and a washable pre-filter for extended filter life.
Safety Information
- Always place the air purifier on a firm, flat surface.
- Keep the device away from water and wet areas.
- Do not block air inlets or outlets.
- Unplug the air purifier before cleaning or performing any maintenance.
- Do not use the device if the power cord or plug is damaged.
- Keep out of reach of children and pets.
- Use only official LEVOIT replacement filters.
Product Overview
Figure 1: Front view of the LEVOIT Vital 200S-P Air Purifier, showcasing its sleek white design and perforated air intake.
Figure 2: The air purifier demonstrating its powerful airflow, designed to freshen homes and eliminate allergens.
Figure 3: Illustration of the air purifier's comprehensive protection system, highlighting the U-shaped air inlet for enhanced intake.
Figure 4: AHAM Certified Performance details for the Vital 200S-P, showing CADR ratings for smoke, dust, and pollen.
Setup
- Unpacking: Carefully remove the air purifier from its packaging. Remove all plastic wrapping and protective materials.
- Filter Installation:
- Open the back cover of the air purifier.
- Remove the pre-installed filter, which may be sealed in plastic. Remove any plastic packaging from the filter.
- Insert the filter back into the air purifier, ensuring it is correctly seated.
- Close the back cover securely.
Figure 5: Illustration showing the process of installing or replacing the filter in the air purifier.
- Placement: Place the air purifier on a flat, stable surface, ensuring there is at least 15 inches (38 cm) of clearance on all sides for optimal airflow.
- Power Connection: Plug the power adapter into the air purifier and then into a grounded electrical outlet.
Operating Instructions
- Power On/Off: Press the Power Button () to turn the air purifier on or off.
- Fan Speed Adjustment: Press the Fan Speed Button () repeatedly to cycle through fan speeds (1, 2, 3, 4).
- Auto Mode: Press the Auto Mode Button () to activate Auto Mode. The air purifier will automatically adjust fan speed based on real-time air quality.
- Sleep Mode: Press the Sleep Mode Button () to enter Sleep Mode. The display lights will dim, and the fan will operate at a very low, quiet speed.
- Timer Function: Press the Timer Button () to set a timer for 2, 4, or 8 hours. The unit will automatically turn off when the timer expires.
- Display Lock: Press and hold the Lock Display Button () for 3 seconds to lock or unlock the display, preventing accidental changes.
- Display Off: Press the Display Off Button () to turn off the display lights. The unit will continue to operate.
- VeSync App Control: Download the free VeSync app to control your air purifier remotely, set schedules, check filter life, and connect to voice assistants.
Figure 6: The VeSync app displaying air quality, pollen alerts, and PM2.5 data tracking, offering smart control and monitoring.
Maintenance
Filter Cleaning and Replacement
Regular maintenance of your filters ensures optimal performance and extends the life of your air purifier.
- Washable Pre-Filter:
- The pre-filter is designed to capture larger particles like pet hair and dust.
- It can be vacuumed or washed with water. Ensure it is completely dry before re-installing.
- Clean the pre-filter every 2-4 weeks, or as needed depending on air quality and usage.
Figure 7: A hand washing the washable pre-filter under running water, demonstrating easy maintenance.
- Main Filter (HEPA/Carbon):
- The main filter captures fine particles, pollen, and odors.
- The VeSync app will notify you when it's time to replace the main filter (typically every 6-8 months, depending on usage).
- To replace, remove the pre-filter, then pull the main filter out using the tabs. Insert a new genuine LEVOIT filter.
General Cleaning
- Wipe the exterior of the air purifier with a soft, dry cloth.
- Do not use abrasive cleaners or chemicals.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Air Purifier does not turn on. | Not plugged in; power adapter not connected; power outage. | Ensure power cord is securely plugged into outlet and air purifier. Check power supply. |
| Airflow is significantly reduced. | Filters are dirty or clogged. | Clean the pre-filter. Check the main filter and replace if necessary. |
| Unusual noise. | Filter not installed correctly; foreign object inside. | Ensure filters are properly seated. Unplug and check for obstructions. |
| Air quality indicator always red/orange. | High pollution levels; sensor is dirty. | Ensure proper ventilation. Clean the air quality sensor (refer to full manual for location). |
Specifications
- Model: Vital 200S-P (LAP-V201S-WUS)
- Dimensions: 15.6"D x 8.5"W x 19.8"H
- Weight: 13.2 Pounds
- Coverage Area: Up to 1875 sq ft
- CADR (Smoke): 250 CFM
- CADR (Dust): 254 CFM
- CADR (Pollen): 289 CFM
- Filtration: 3-Stage Filtration (Washable Pre-Filter, H13 True HEPA Filter, Activated Carbon Filter)
- Connectivity: Wi-Fi (VeSync App)
- Certifications: AHAM VERIFIDE, Energy Star, CARB Certified
Official Product Videos
Warranty and Support
The LEVOIT Vital 200S-P Air Purifier comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the official Warranty (PDF) document.
For additional support, troubleshooting, or to purchase genuine replacement filters, please visit the official LEVOIT website or contact customer service. You can also refer to the User Manual (PDF) or User Guide (PDF) for more in-depth information.
