KASLIGHT xy1

Download PDF
Contents

KASLIGHT 7-Inch LED Headlights H6024 Installation and Operation Manual

Model: xy1

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your KASLIGHT 7-inch LED Headlights, model H6024. These headlights are designed to offer enhanced visibility and performance for compatible vehicles. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Package Contents

Verify that all items listed below are included in your package:

  • 2 x KASLIGHT 7-inch LED Headlights
  • 2 x H4 to H13 Adapters

3. Specifications

FeatureSpecification
Model Numberxy1
Dimensions (approx.)7 inches (diameter) x 2.75 inches (depth)
Weight (approx.)1.54 kg (per pair)
Light Source TypeCREE LED Chip
Color Temperature6000K White
Luminous Flux (High Beam)4800 LM
Luminous Flux (Low Beam)3000 LM
VoltageDC 12V-24V
Wattage45 Watts
Waterproof RateIP67
Lens MaterialAnti-scratch Polycarbonate
Housing MaterialCasting Aluminum Base
LifespanUp to 50,000 Hours
CertificationsCE, RoHS, DOT approval
KASLIGHT 7-inch LED Headlight dimensions, showing a front view with '7 INCH' width and a side view with '2.75 INCH' depth.

Image: Front and side view of the KASLIGHT 7-inch LED Headlight, illustrating its 7-inch diameter and 2.75-inch depth.

4. Compatibility

These KASLIGHT 7-inch LED Headlights are designed as a direct replacement for standard 7-inch round headlights. They are compatible with a wide range of vehicles, including but not limited to:

  • Jeep Wrangler TJ (1997-2006)
  • Jeep Wrangler LJ Unlimited (2003-2006)
  • Jeep Wrangler JK JKU 2 & 4 Doors Models (2007-2018)
  • Jeep CJ-7 (1976-1986)
  • Jeep CJ-8 Scrambler (1981-1985)
  • AM General Hummer (1992-2001)
  • Hummer H1 & H2 (2003-2009) - Note: Hummer H2 models require a 9007 male to H4 female adapter, which is not included in this package.
  • Compatible with Mazda Miata
  • Compatible with Chevy models with 7-inch round headlights

These headlights are a drop-in replacement for H6024, 6014, and 6024 type headlights.

5. Safety Information

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury or damage to the product or vehicle.

  • Ensure the vehicle's ignition is off and the battery is disconnected before beginning any electrical work.
  • Wear appropriate personal protective equipment, such as safety glasses and gloves.
  • If you are unsure about any step of the installation process, consult a qualified automotive technician.
  • Do not modify the product in any way, as this may void the warranty and create safety hazards.
  • Ensure all connections are secure and properly insulated to prevent short circuits.

6. Setup and Installation

The KASLIGHT 7-inch LED Headlights are designed for a direct plug-and-play replacement, typically completing installation in 20 minutes or less. An H4-H13 adapter is included, and the built-in anti-flicker harness eliminates the need for an additional decoder.

Installation Steps:

  1. Preparation: Park your vehicle on a level surface, turn off the ignition, and disconnect the negative terminal of the battery.
  2. Remove Existing Headlights: Carefully remove the grille and any retaining rings or screws holding the original 7-inch headlights in place. Disconnect the wiring harness from the old headlight.
  3. Connect Wiring: Connect the provided H4-H13 adapter to your vehicle's existing headlight harness. The KASLIGHT LED headlight features a built-in anti-flicker harness.
  4. Install New Headlight: Insert the KASLIGHT LED headlight into the headlight bucket. Secure it with the retaining ring and screws previously removed.
  5. Connect Halo/DRL/Turn Signal Wires: The headlights feature additional wires for the White Halo Ring (DRL) and Blue Amber Turn Signal Lights. These wires need to be connected to the appropriate power sources in your vehicle's electrical system. Typically, the DRL wire connects to an accessory power source, and the turn signal wire connects to the vehicle's turn signal circuit. Use the provided connectors or appropriate wiring methods to ensure secure connections.
  6. Test Functionality: Reconnect the battery. Turn on the vehicle's lights to test the high beam, low beam, DRL, and turn signal functions.
  7. Reassemble: Once all functions are verified, reattach the grille and any other components removed during installation.

Video: KASLIGHT 7-inch LED Headlight easy installation guide. This video demonstrates the wiring and mounting process for the headlights.

Wiring diagram for KASLIGHT LED Headlights showing connections for DRL/Angel Eye, High Beam, Low Beam, Negative, and Turn Signal, along with H4-H13 adapters.

Image: Detailed wiring connections for the KASLIGHT LED Headlights, including the H4-H13 adapters and individual wires for DRL, high beam, low beam, negative, and turn signal.

7. Operating Instructions

Your KASLIGHT 7-inch LED Headlights offer multiple lighting modes for various driving conditions:

  • High Beam: Provides maximum illumination for clear visibility over long distances.
  • Low Beam: Standard driving light, designed to illuminate the road without blinding oncoming traffic.
  • DRL (Daytime Running Light) / White Halo Ring: A white halo ring illuminates around the main headlight, enhancing vehicle visibility during daylight hours.
  • Blue Amber Turn Signal Lights: The halo ring can switch to blue or amber to function as a turn signal, providing clear indication of your vehicle's intentions.

Switch between high and low beams using your vehicle's standard headlight control. The DRL and turn signal functions are activated via their respective wiring connections during installation.

Four light modes of KASLIGHT LED Headlights: High Beam, Low Beam, DRL (Daytime Running Light) with blue halo, and Turn Signal with amber light.

Image: Visual representation of the four distinct light modes: High Beam, Low Beam, DRL (Daytime Running Light) with a blue halo, and Turn Signal with an amber light.

KASLIGHT LED Headlights demonstrating IP67 waterproof rating with water splashing on the headlight, showing a sealed beam design.

Image: The KASLIGHT LED Headlight demonstrating its IP67 waterproof rating, with water splashing on the sealed beam, indicating protection from external elements.

8. Maintenance

KASLIGHT LED Headlights are designed for durability and minimal maintenance. The casting aluminum base housing and anti-scratch polycarbonate lens contribute to their robust construction. The ribbed design ensures efficient cooling, promoting a long lifespan.

  • Cleaning: Clean the headlight lenses regularly with a soft cloth and mild soap and water. Avoid abrasive cleaners or harsh chemicals that could damage the lens.
  • Inspection: Periodically inspect the wiring and connections for any signs of wear, corrosion, or damage. Ensure all mounting hardware remains secure.
  • Heat Dissipation: The headlights feature a large heat-dissipation area. Ensure that the area around the headlight is not obstructed to allow for proper airflow and cooling.
Diagram illustrating the heat sink design of KASLIGHT LED Headlights, showing cooling fins and arrows indicating heat dissipation for maximum LED efficiency and long lifespan.

Image: Diagram of the KASLIGHT LED Headlight's heat sink, highlighting the cooling fins and heat dissipation process, which ensures optimal LED performance and longevity.

9. Troubleshooting

If you encounter any issues with your KASLIGHT LED Headlights, refer to the following common troubleshooting tips:

  • Headlights Not Turning On:
    • Check all wiring connections to ensure they are secure and properly connected.
    • Verify that the vehicle's fuses related to the headlights are intact.
    • Ensure the battery is fully charged and properly connected.
  • Flickering Lights:
    • These headlights have a built-in anti-flicker harness. If flickering occurs, re-check all connections for looseness or poor contact.
    • Ensure the vehicle's electrical system is providing stable voltage.
  • DRL or Turn Signal Not Functioning:
    • Confirm that the DRL and turn signal wires are correctly connected to their respective power sources in the vehicle.
    • Check for any breaks or damage in the specific DRL or turn signal wiring.
  • Dim Lighting:
    • Ensure the headlight lens is clean and free from dirt or debris.
    • Verify that the vehicle's charging system is operating correctly and providing adequate voltage.

For issues not resolved by these steps, please contact KASLIGHT customer support.

10. Warranty and Support

KASLIGHT provides a 24-month warranty for these LED Headlights. This warranty covers manufacturing defects and ensures the product meets its specified performance standards under normal use.

If you experience any quality issues or require technical assistance, please do not hesitate to contact us via the Amazon message center. Our support team is available to help you with any concerns or questions regarding your KASLIGHT product.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.