ClearClick Video2Digital 3.0 Bundle Edition

Download PDF
Contents

ClearClick Video to Digital Converter 3.0 Instruction Manual

Model: Video2Digital 3.0 Bundle Edition

Brand: ClearClick

1. Introduction

The ClearClick Video to Digital Converter 3.0 is a standalone device designed to convert your old analog video and audio sources into modern digital formats. This third-generation converter allows you to preserve memories from VHS tapes, camcorder tapes, cassette tapes, and vinyl records by digitizing them directly onto a USB flash drive or MicroSD card, without the need for a computer.

This bundle edition includes a 128 GB USB flash drive and VideoPad Video Editing Software to assist with your digitization projects.

2. Package Contents

Please verify that all items are present in your package:

  • ClearClick Video to Digital Converter 3.0
  • 128 GB USB 3.0 Flash Drive
  • VideoPad Video Editing Software License Card (Digital Download)
  • RCA AV Cables (Red, White, Yellow)
  • USB-C Charging Cable
  • Power Adapter
  • Instruction Manual
ClearClick Video to Digital Converter 3.0 with included accessories

Image: The ClearClick Video to Digital Converter 3.0 shown with its included accessories, including the 128GB USB drive, RCA cables, and VideoPad software box.

3. Important Notes Before Use

Please read these critical points carefully to ensure proper operation and avoid issues:

  • A WORKING VCR or Camcorder with a WORKING 'AV OUT' Port is required. The converter itself DOES NOT play tapes.
  • Your VHS/Camcorder tapes MUST be in working condition. If your VCR/camcorder cannot play it, the converter cannot capture it.
  • Recording resolution is 640x480 pixels or 720x480 pixels. The device DOES NOT upscale to HD quality.
  • The device DOES NOT record from modern HDMI sources.
  • To avoid corrupting recorded files, you MUST press the 'Rec/Stop' button BEFORE removing your USB drive or MicroSD card.
Hand holding ClearClick Video to Digital Converter 3.0 with important notes displayed

Image: A hand holding the converter, illustrating its compact size, with a graphic highlighting important usage notes regarding source device requirements and recording limitations.

4. Product Overview

4.1 Device Layout

The ClearClick Video to Digital Converter 3.0 features a user-friendly design with a 5-inch LCD screen and intuitive controls.

  • Front: 5-inch LCD Preview Screen, Menu, Mode, Up, Down, OK, and Rec/Stop buttons.
  • Side/Back Ports:
    • Power Button (LCD On/Off): Turns the screen on or off.
    • Power/Charging Port (USB-C): For connecting the power adapter and charging the built-in battery.
    • MicroSD Memory Card Slot: Supports MicroSD cards up to 512 GB (not included).
    • S-Video Input Port: For video input only (no audio).
    • AV Video & Audio Input Ports (RCA): Connect your video source (yellow for video) and audio source (red for right audio, white for left audio) here.
    • HDMI Output: Connects to your TV or monitor for a larger view. Note: This is an output port only and does not record from HDMI sources.
    • USB Flash Drive Port: For connecting a USB flash drive up to 512 GB (128 GB drive included).
Back view of ClearClick Video to Digital Converter 3.0 with labeled ports

Image: The back of the converter showing all input and output ports clearly labeled, including USB-C, MicroSD, S-Video, RCA AV, HDMI Out, and USB Flash Drive ports.

5. Setup

5.1 Charging the Device

Before first use, fully charge the built-in rechargeable battery. Connect the USB-C charging cable to the Power/Charging Port on the converter and the other end to the included power adapter. Plug the adapter into a wall outlet. The charging indicator will show the charging status.

5.2 Connecting Your Analog Source

Connect your analog video or audio source (e.g., VCR, camcorder, DVD player, cassette player, turntable) to the converter using the provided RCA AV cables or an S-Video cable (if your source supports it).

  • For Video + Audio (RCA): Connect the yellow cable to the video output of your source, and the red and white cables to the right and left audio outputs, respectively. Connect the other ends to the corresponding AV Input Ports on the converter.
  • For Video Only (S-Video): Connect an S-Video cable from your source to the S-Video Input Port on the converter. For audio, you will still need to use the red and white RCA audio cables.
  • For Audio Only (RCA): Connect the red and white RCA audio cables from your audio source (e.g., cassette player, turntable) to the red and white AV Audio Input Ports on the converter.

5.3 Inserting Storage Media

Insert the included 128 GB USB flash drive into the USB Flash Drive Port or a MicroSD card (up to 512 GB, not included) into the MicroSD Memory Card Slot. Ensure it is inserted correctly.

5.4 Optional: Connecting to a TV/Monitor

For a larger viewing experience, connect an HDMI cable (not included) from the HDMI Output port on the converter to an HDMI input on your TV or monitor. This is for viewing only; recording is done internally to the USB/MicroSD.

6. Operation

6.1 Powering On and Menu Navigation

  1. Press the Power Button (LCD On/Off) to turn on the device screen.
  2. Use the Menu button to access settings.
  3. Use the Mode button to switch between Video Recording Mode and Audio Recording Mode.
  4. Use the Up and Down arrows to navigate menu options.
  5. Press OK to confirm selections.

6.2 Video Recording Mode

  1. Ensure your analog video source is connected via RCA or S-Video.
  2. Press the Mode button until 'Video Recording Mode' is displayed on the screen.
  3. Start playback on your source device (e.g., press Play on your VCR). You should see the video on the converter's screen.
  4. Press the Rec/Stop button on the converter to begin recording. A red recording indicator will appear.
  5. Monitor the recording on the 5-inch screen.
  6. To stop recording, press the Rec/Stop button again. The recording indicator will disappear.
  7. After stopping, wait a few seconds for the file to save before removing the USB drive/MicroSD card.
ClearClick Video to Digital Converter 3.0 in Video Recording Mode

Image: The converter displaying a video on its screen, indicating it is in 'Video Recording Mode'.

6.3 Audio Recording Mode

  1. Ensure your analog audio source is connected via the red and white RCA audio cables.
  2. Press the Mode button until 'Audio Recording Mode' is displayed. The screen will show an audio equalizer graphic.
  3. Start playback on your audio source device (e.g., press Play on your cassette player).
  4. Press the Rec/Stop button on the converter to begin recording. A red recording indicator will appear.
  5. Monitor the audio levels on the screen's equalizer.
  6. To stop recording, press the Rec/Stop button again.
  7. After stopping, wait a few seconds for the file to save before removing the USB drive/MicroSD card.
ClearClick Video to Digital Converter 3.0 in Audio Recording Mode

Image: The converter displaying an audio equalizer graphic on its screen, indicating it is in 'Audio Recording Mode'.

6.4 Custom Auto Stop Feature

The converter includes a custom auto-stop feature, allowing you to set a specific recording duration in minutes. This is useful for unattended recordings of known lengths.

  1. Access the Menu.
  2. Navigate to the 'Auto Stop' option.
  3. Set the desired recording duration in minutes.
  4. Confirm your selection. The recording will automatically stop after the set time.

7. File Management

Once your recording is complete, the digital files are saved onto the inserted USB flash drive or MicroSD card.

  • Video recordings are saved as MP4 files.
  • Audio recordings are saved as MP3 or WAV files, depending on your settings.

To access your files, safely remove the USB drive or MicroSD card from the converter and insert it into a computer. You can then copy, play, or edit your digitized media.

7.1 Using VideoPad Video Editing Software

The bundle includes a license for VideoPad Video Editing Software. This software can be used on both Windows and Mac computers to further edit your recorded video and audio files.

  1. Locate the VideoPad Software License Card in your package.
  2. Follow the instructions on the card to download and activate the software.
  3. Import your MP4, MP3, or WAV files into VideoPad for editing, trimming, adding effects, or combining clips.
ClearClick bundle contents: USB drive and VideoPad software

Image: A close-up of the included 128GB USB 3.0 Flash Drive and the VideoPad Master's Edition Video Editing Software license card, highlighting the bundle components.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or solvents.
  • Storage: Store the converter in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% every few months.
  • Cable Care: Handle cables by the connectors, not the wires, to prevent damage.

9. Troubleshooting

ProblemPossible CauseSolution
No signal/Black screen during recording.Incorrect cable connection; Source device not playing; Source device not working; Incorrect input selected.Check all cable connections (RCA/S-Video). Ensure your VCR/camcorder is powered on and playing. Verify the correct input mode is selected on the converter. Test your source device with a TV to confirm it's working.
Recording stops unexpectedly or files are corrupt.Storage media removed during recording; Storage full; Faulty storage media.Always press 'Rec/Stop' before removing storage. Check available space on USB/MicroSD. Try a different USB drive or MicroSD card.
Poor video/audio quality.Poor quality of original source; Damaged cables; Dirty VCR/camcorder heads.The converter records at 640x480 or 720x480 pixels; it cannot improve the original analog quality. Ensure cables are not damaged. Clean your VCR/camcorder heads if necessary.
Device not powering on.Battery drained; Power adapter issue.Connect the device to the power adapter and allow it to charge for at least 30 minutes. Ensure the power adapter is plugged into a working outlet.
USB drive/MicroSD card not recognized.Incorrect format; Exceeds supported size; Improper insertion.Ensure the drive/card is formatted to FAT32 or exFAT. Max supported size is 512 GB. Reinsert the storage media firmly. Try a different drive/card.

10. Specifications

FeatureDetail
Product Dimensions6.2 x 3.5 x 1 inches
Item Weight8 ounces
Model NumberVideo2Digital 3.0 Bundle Edition
Compatible DevicesVCR, Camcorder, DVD Player, Cassette Player, Turntable, Retro Gaming Systems
Specific Uses For ProductTV, Monitor (for output viewing)
Connector TypeRCA, S-Video (input); HDMI (output); USB-C (power); USB-A (storage)
Video Recording FormatMP4 (720x480 or 640x480 Pixels)
Audio Recording FormatWAV or MP3
Storage Media SupportUSB Flash Drive (up to 512 GB), MicroSD Card (up to 512 GB)
Display5-inch LCD Preview Screen
BatteryBuilt-in Rechargeable Battery

11. Warranty and Support

The ClearClick Video to Digital Converter 3.0 comes with a 2-Year Warranty and dedicated Tech Support from ClearClick, a USA Small Business.

For technical assistance, warranty claims, or any questions regarding your product, please refer to the contact information provided on the ClearClick website or the documentation included with your purchase.

© 2024 ClearClick. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.