Trak Racer Pedal Slider Kit User Manual

1. Introduction

The Trak Racer Pedal Slider Kit is designed to provide quick and precise adjustment of your pedal position on compatible Trak Racer cockpits. This dual-locking system allows users to easily fine-tune their driving ergonomics, enhancing comfort and performance during simulation. It integrates seamlessly with pre-drilled pedal plates and pedal adjustment brackets found on Trak Racer profile cockpits.

This kit is compatible with Trak Racer TR160, TR120, TR80 MK4, TR80 MK5, and TR80-LITE cockpits.

2. Package Contents

Image 2.1: All components included in the Trak Racer Pedal Slider Kit. This image displays the dual-locking pedal slider with its adjustment bar, alongside two heavy-duty steel brackets designed for attachment to the Trak Racer pedal plate. All necessary fixing screws are also part of the kit, though not individually highlighted in this view.

Please verify that all the following components are present in your package:

• Dual Locking Pedal Slider with Adjustment Bar (1 unit)
• Heavy-Duty Steel Brackets (2 units) - for attaching to the Trak Racer pedal plate
• Fixing Screws (complete set) - for assembly

Note: The pedal plate and pedal bracket side plates are not included with this kit.

3. Setup and Installation

3.1. Pre-Installation Checklist

Before beginning installation, ensure you have the following:

• Your Trak Racer cockpit with pedal plate and pedal adjustment brackets.
• Appropriate tools (e.g., Allen keys, wrenches) for tightening screws.
• A clean, well-lit workspace.

3.2. Installation Steps

Follow these steps to install your Pedal Slider Kit:

1. Prepare the Pedal Plate: Ensure your Trak Racer pedal plate is clean and accessible. If pedals are currently mounted, they may need to be temporarily removed or loosened to access mounting points.
2. Attach Steel Brackets: Secure the two heavy-duty steel brackets to the underside of your Trak Racer pedal plate using the provided fixing screws. Align the pre-drilled holes on the brackets with those on the pedal plate. Ensure they are firmly tightened.
3. Mount Pedal Slider: Attach the dual-locking pedal slider mechanism to the steel brackets. The slider should be positioned so that the adjustment bar is accessible from the front of your cockpit. Use the remaining fixing screws to secure the slider to the brackets.
4. Integrate with Cockpit: Connect the assembled pedal slider and plate unit to the pedal adjustment brackets of your Trak Racer cockpit. This typically involves sliding the unit into the cockpit's profile and securing it with the cockpit's existing mounting hardware.
5. Final Check: Once installed, gently test the slider mechanism to ensure it moves smoothly and locks securely. Verify all screws are tightened to prevent movement during use.

The assembly process is designed for easy and fast completion.

4. Operation

The Trak Racer Pedal Slider Kit allows for quick and precise adjustment of your pedal position. To adjust:

• Unlock: Locate the adjustment bar, typically positioned at the front of the pedal slider. Pull or lift the bar to disengage the dual-locking mechanism.
• Adjust: While the mechanism is unlocked, slide the entire pedal assembly forward or backward to your desired position.
• Lock: Release the adjustment bar. The dual-locking mechanism will automatically engage, securing the pedal assembly firmly in its new position. Ensure the bar is fully seated and the pedals are stable before use.

This system provides a secure and stable platform for your pedals, allowing for on-the-fly adjustments without the need for tools.

5. Maintenance

To ensure the longevity and smooth operation of your Trak Racer Pedal Slider Kit, consider the following maintenance tips:

• Regular Cleaning: Periodically wipe down the slider rails and locking mechanism with a clean, dry cloth to remove dust and debris. Avoid abrasive cleaners.
• Lubrication: If the sliding action becomes stiff over time, apply a small amount of silicone-based lubricant to the slider rails. Avoid oil-based lubricants that can attract dust.
• Check Fasteners: Routinely inspect all screws and bolts to ensure they remain tight. Vibrations from use can sometimes cause fasteners to loosen. Tighten as necessary.
• Inspect for Wear: Occasionally check the locking mechanism and slider components for any signs of wear or damage. If any part appears compromised, contact customer support for assistance.

6. Troubleshooting

If you encounter issues with your Pedal Slider Kit, refer to the following common problems and solutions:

• Problem: The pedal slider is difficult to move or feels stiff.
  Solution: Ensure the adjustment bar is fully disengaged. Clean the slider rails to remove any accumulated dust or debris. Apply a small amount of silicone lubricant to the rails.
• Problem: The pedal assembly feels loose or unstable after adjustment.
  Solution: Verify that the adjustment bar is fully released and the dual-locking mechanism has engaged. Check all mounting screws for the steel brackets and the slider itself, ensuring they are securely tightened.
• Problem: Missing or damaged components upon arrival.
  Solution: Refer to the "Package Contents" section (Section 2) and contact Trak Racer customer support immediately with details of the missing or damaged parts.

If these solutions do not resolve your issue, please contact Trak Racer customer support for further assistance.

7. Specifications

8. Warranty Information

The Trak Racer Pedal Slider Kit comes with a 5-year warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, or to initiate a claim, please contact Trak Racer customer support.

9. Customer Support

For any questions, technical assistance, or support regarding your Trak Racer Pedal Slider Kit, please visit the official Trak Racer website or contact their customer service department. You can often find support contact information, FAQs, and additional resources on their website.

Trak Racer Official Store: Visit Trak Racer Store on Amazon