1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your Dripex Adjustable Electric Standing Desk. Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.
2. Safety Information
- Weight Capacity: Do not exceed the maximum weight recommendation of 176 pounds (80 kg) on the desktop. Overloading can cause damage or injury.
- Assembly: It is recommended that two people assemble this desk due to the weight and size of components.
- Pinch Points: Keep hands and fingers clear of moving parts during height adjustment to avoid pinching.
- Power: Ensure the power cord is properly connected and not damaged. Do not operate the desk if the cord is frayed or damaged.
- Placement: Place the desk on a level surface. Ensure there is sufficient clearance around the desk for safe operation and to prevent collision with other objects.
- Children and Pets: Keep children and pets away from the desk during operation.
- Liquids: Avoid spilling liquids on the control panel or electrical components.
The desk features an anti-collision system and overload protection to enhance safety during operation.
3. Package Contents
Before beginning assembly, verify that all parts are present and undamaged. Refer to the assembly video for visual identification of components.
- Desktop sections (K1, K2)
- Leg columns (B)
- Motor (D)
- Connecting rod (A)
- Side brackets (E, F)
- Feet (J)
- Control panel (M)
- Power adapter and cables (S10)
- Cable clips (S10)
- Cup holder
- Headphone hook
- Various screws and tools (S2, S3, S6, S7, S8, S11, S12, S13)
4. Assembly Instructions
Follow these steps carefully for proper assembly. It is recommended to have two people for assembly.
Video: Dripex Electric Standing Height Adjustable Desk - 63 Inches. This video demonstrates the complete assembly process for the desk.
Step 1: Assemble the Motor and Connecting Rod
- Insert the connecting rod (A) into the motor (D) and one leg column (B). Ensure the 'Front' indicator on the leg column faces forward.
- Attach the second leg column (B) to the other end of the connecting rod (A).
- Secure the motor (D) and connecting rod (A) to the leg columns.
Step 2: Attach Side Brackets
- Attach the side brackets (E, F) to the top of the leg columns using the provided screws (S6, S3).
- Ensure the brackets are securely fastened.
Step 3: Install Feet and Support Arms
- Attach the feet (J) to the bottom of the leg columns using screws (S6).
- Install the support arms (I) to the leg columns using screws (S6, S3).
- Important: Ensure the table legs are vertical to the connecting rod. Tighten all screws securely.
Step 4: Mount the Desktop
- Place the desktop sections (K1, K2) upside down on a soft, clean surface.
- Align the two desktop boards and secure them together using screws (S8). Ensure they are aligned and seamless.
- Carefully place the assembled frame onto the desktop, aligning the screw holes.
- Secure the frame to the desktop using screws (S8).
- Attach the control panel (M) and power adapter (S10) to the underside of the desk using screws (S8). Use cable clips (S10) to manage cables.
- Install the cup holder and headphone hook as desired.
- Insert the cable grommets (S13) into the desktop holes.
Step 5: Factory Reset (Initial Setup)
After assembly, perform a factory reset to synchronize the motors:
- Press and hold the UP (▲) and DOWN (▼) buttons on the control panel simultaneously for 5 seconds.
- Release your fingers when the display shows '---'.
- The desk will automatically lower to its lowest point. This indicates a successful factory reset and installation.
5. Operating Instructions
The Dripex Intelligent Control Lifter provides intuitive control over your desk's height and features. The control panel includes buttons for UP/Down movement, a sedentary reminder, a reset function, and memory presets for sitting and standing heights.
Height Adjustment
- Up/Down: Press the ▲ (Up) button to raise the desk and the ▼ (Down) button to lower it. Release the button at your desired height.
Memory Presets
- Set Memory Height: Adjust the desk to your preferred sitting or standing height. Press the 'M' button, then press one of the numbered memory buttons (e.g., '1' for sitting, '2' for standing) to save the current height.
- Recall Memory Height: Press the corresponding numbered memory button (e.g., '1' or '2') to automatically move the desk to the saved height.
Sedentary Reminder
- Press the 'T' button to activate or deactivate the sedentary reminder. When active, the desk will prompt you to change positions after a set time (e.g., 45 minutes sitting, 15 minutes standing).
Reset Function
- If the desk encounters an error or does not move smoothly, perform a reset by pressing the 'RESET' button. The desk will move to its lowest position and then slightly up to recalibrate.
6. Features
The Dripex Adjustable Electric Standing Desk is designed with several features to enhance user experience and safety:
- Anti-Collision System: The desk automatically stops and reverses slightly if it encounters an obstacle during height adjustment, preventing damage or injury.
- Overload Protection: The motor is protected against excessive weight, ensuring longevity and safe operation.
- Low Noise Operation: The electric motor operates quietly, with noise levels typically below 45dB, minimizing disruption in your workspace.
Additional convenient features include:
- Practical Cup Holder: A removable cup holder keeps your beverages secure and within reach.
- Headphone Hook: A convenient hook allows you to hang your headphones or bag, keeping your desktop clutter-free.
7. Specifications
The desk features a spacious desktop and a robust frame, designed for ergonomic use.
| Feature | Specification |
|---|---|
| Brand | Dripex |
| Model Number | Adjustable Electric Standing Desk |
| Desk Design | Standing Desk |
| Product Dimensions (D x W x H) | 28"D x 63"W x 46"H |
| Adjustable Height Range | 28 inches (min) to 46 inches (max) |
| Color | Grey Brown |
| Top Material Type | Wood |
| Base Material | Alloy Steel |
| Maximum Weight Recommendation | 176 Pounds (80 kg) |
| Item Weight | 56 Pounds (25.4 kg) |
| Lifting Mechanism | Electric |
| Special Features | Adjustable Height, Electric, Anti-collision, Overload Protection, Low Noise |
| Included Components | Cup Holder, Headphone Hook |
8. Maintenance
- Cleaning: Wipe the desktop and frame with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Cable Management: Regularly check and organize cables to prevent tangles and damage. Use the provided cable clips.
- Screw Tightness: Periodically check all screws and connections to ensure they remain tight. Retighten if necessary.
- Motor Care: Avoid overloading the desk beyond its specified weight capacity to ensure the longevity of the electric motor.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Desk does not move or respond to controls. | Power connection issue, motor error, or control panel malfunction. | Check if the power cord is securely plugged into the wall outlet and the desk. Perform a factory reset (see Section 4, Step 5). If the issue persists, contact customer support. |
| Desk moves unevenly or makes unusual noises. | Loose connections, uneven load, or motor synchronization issue. | Ensure the desk is on a level surface and the weight is evenly distributed. Check all assembly screws for tightness. Perform a factory reset. |
| Anti-collision system frequently activates. | Obstruction in the desk's path. | Ensure there are no objects above or below the desk that could interfere with its movement. |
| Sedentary reminder not working. | Reminder function is deactivated. | Press the 'T' button on the control panel to activate the sedentary reminder. |
10. Warranty and Support
The Dripex Adjustable Electric Standing Desk comes with a limited warranty. For specific warranty details, please refer to the warranty card included with your product or contact Dripex customer support.
If you encounter any issues not covered in this troubleshooting guide or require further assistance, please contact Dripex customer support through the retailer where you purchased the product or visit the official Dripex website for contact information.
