1. Introduction
Thank you for choosing the KREAFUNK aGROOVE+ Portable Bluetooth Speaker. This manual provides essential information for setting up, operating, and maintaining your speaker. The aGROOVE+ is designed for high-quality audio on the go, featuring Bluetooth connectivity, a durable water-resistant (IPX4) design, and up to 30 hours of wireless play time.
2. Package Contents
- KREAFUNK aGROOVE+ Portable Bluetooth Speaker
- USB Charging Cable
3. Product Overview
Familiarize yourself with the components and controls of your aGROOVE+ speaker.
Image: Angled view of the KREAFUNK aGROOVE+ speaker in pink, showcasing its compact design and integrated handle.
Image: Top view of the KREAFUNK aGROOVE+ speaker, highlighting the control panel with the power button, volume down/previous track button, and volume up/next track button.
Control Buttons:
- Power Button (⏻): Press and hold to power on/off. Short press to play/pause. Long press to enter Bluetooth pairing mode.
- Volume Down / Previous Track (-): Short press to decrease volume. Long press to skip to the previous track.
- Volume Up / Next Track (+): Short press to increase volume. Long press to skip to the next track.
4. Setup
4.1 Charging the Speaker
- Connect the supplied USB charging cable to the charging port on your aGROOVE+ speaker.
- Connect the other end of the USB cable to a compatible USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate during charging and turn off when fully charged.
- A full charge takes approximately 4 hours.
4.2 Powering On/Off
- To power on, press and hold the Power Button (⏻) until you hear an audible prompt or see the indicator light.
- To power off, press and hold the Power Button (⏻) again until the speaker shuts down.
4.3 Bluetooth Pairing
- Ensure the speaker is powered on. If it's the first time pairing, the speaker will automatically enter Bluetooth pairing mode, indicated by a flashing LED light.
- If the speaker has been paired before, long press the Power Button (⏻) to force it into pairing mode.
- On your mobile device (smartphone, tablet, etc.), enable Bluetooth and search for available devices.
- Select 'aGROOVE+' from the list of devices.
- Once connected, the speaker will provide an audible confirmation, and the LED light will stop flashing.
4.4 True Wireless Stereo (TWS) Pairing
To enhance your audio experience, you can pair two aGROOVE+ speakers together for stereo sound.
- Ensure both aGROOVE+ speakers are powered on and not connected to any other Bluetooth device.
- On one of the speakers (this will be your primary speaker), long press the Power Button (⏻) to enter TWS pairing mode.
- The primary speaker will search for the secondary speaker.
- Once connected, both speakers will provide an audible confirmation.
- Now, connect your mobile device to the primary aGROOVE+ speaker via Bluetooth as described in section 4.3.
5. Operating the Speaker
5.1 Music Playback
- Play/Pause: Short press the Power Button (⏻).
- Volume Up: Short press the '+' button.
- Volume Down: Short press the '-' button.
- Next Track: Long press the '+' button.
- Previous Track: Long press the '-' button.
5.2 Voice Assistant
The aGROOVE+ speaker supports voice assistant functionality. To activate your device's voice assistant (e.g., Siri, Google Assistant), ensure your speaker is connected to your smartphone, then refer to your smartphone's instructions for activating its voice assistant via a connected Bluetooth device.
6. Maintenance
6.1 Cleaning
To clean your speaker, gently wipe the surfaces with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals, abrasive cleaners, or solvents, as these can damage the speaker's finish and components.
6.2 Water Resistance (IPX4)
The aGROOVE+ speaker is rated IPX4, meaning it is resistant to splashing water from any direction. This makes it suitable for use in environments where it might encounter splashes, such as by a pool or in a bathroom. However, it is not designed to be submerged in water. Do not expose it to running water or immerse it.
Image: The KREAFUNK aGROOVE+ speaker placed on a bathroom counter next to a sink, illustrating its suitability for splash-prone environments due to its IPX4 water resistance rating.
6.3 Storage
When not in use, store the speaker in a cool, dry place away from direct sunlight and extreme temperatures. Ensure it is fully charged before long-term storage to preserve battery health.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Battery is depleted | Charge the speaker for at least 30 minutes. |
| Cannot pair via Bluetooth | Speaker not in pairing mode; Bluetooth disabled on device; device too far | Ensure speaker is in pairing mode (flashing LED). Enable Bluetooth on your device. Move device closer to speaker (within 10 meters). |
| No sound or low volume | Volume too low; speaker not connected; audio source paused | Increase volume on both speaker and connected device. Verify Bluetooth connection. Check if audio is playing on your device. |
| Poor sound quality | Interference; device too far; low battery | Move speaker closer to the connected device. Avoid obstacles between devices. Charge the speaker. |
| TWS pairing fails | Speakers already paired to another device; incorrect pairing procedure | Ensure both speakers are disconnected from other devices. Follow TWS pairing instructions carefully (Section 4.4). |
8. Specifications
- Model: KF-0505
- Dimensions: 1.18"D x 7.8"W x 5.12"H (30mm D x 198mm W x 130mm H)
- Weight: 1.1 Pounds (0.5 kg)
- Battery Life: Up to 30 hours (at moderate volume)
- Charging Time: Approximately 4 hours
- Water Resistance: IPX4 (Splash-proof)
- Connectivity: Bluetooth
- Speaker Output Power: 80 Watts
- Power Source: Corded Electric (via USB charging cable)
9. Safety Information
Please read and follow these safety guidelines to ensure safe operation of your aGROOVE+ speaker:
- Do not expose the speaker to extreme temperatures (hot or cold), direct sunlight, or high humidity.
- Do not disassemble, repair, or modify the speaker yourself. This will void the warranty and may result in electric shock or fire.
- Keep the speaker away from open flames or heat sources.
- Use only the supplied USB charging cable or a certified equivalent.
- Avoid dropping or subjecting the speaker to strong impacts.
- Keep out of reach of children.
10. Warranty and Support
10.1 Warranty
The KREAFUNK aGROOVE+ Portable Bluetooth Speaker comes with a 2-Year Limited Warranty from the date of purchase. This warranty covers manufacturing defects and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear. Please retain your proof of purchase for warranty claims.
10.2 Customer Support
For technical support, warranty inquiries, or further assistance, please visit the official KREAFUNK website or contact their customer service department. Contact details can typically be found on the KREAFUNK website or product packaging.
